Freeradius + Xp Client problem

[BoRa]

When i trying connect radius server with wireless over
access point i get this error : 

rad_recv: Access-Request packet from host
10.10.0.10:2048, id=110, length=163
        User-Name = "ibm"
        NAS-IP-Address = 10.10.0.10
        NAS-Port = 0
        Called-Station-Id = "00e098be8e15"
        Calling-Station-Id = "000cf138bb81"
        NAS-Identifier = "Realtek Access Point. 8181"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        Service-Type = Framed-User
        Connect-Info = "CONNECT 11Mbps 802.11b"
        EAP-Message = 0x020000080169626d
        Message-Authenticator =
0x8c249d2c90720d71e84717a58070eaae
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 15
  modcall[authorize]: module "preprocess" returns ok
for request 15
  modcall[authorize]: module "chap" returns noop for
request 15
  modcall[authorize]: module "mschap" returns noop for
request 15
    rlm_realm: No '@' in User-Name = "ibm", looking up
realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for
request 15
  rlm_eap: EAP packet type response id 0 length 8
  rlm_eap: No EAP Start, assuming it's an on-going EAP
conversation
  modcall[authorize]: module "eap" returns updated for
request 15
    users: Matched entry ibm at line 80
  modcall[authorize]: module "files" returns ok for
request 15
modcall: group authorize returns updated for request
15
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 15
  rlm_eap: EAP Identity
  rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
  modcall[authenticate]: module "eap" returns handled
for request 15
modcall: group authenticate returns handled for
request 15
Sending Access-Challenge of id 110 to 10.10.0.10:2048
        Reply-Message = "Hello, %u"
        EAP-Message =
0x01010016041094b82f52b0da67bfb8de368e6d9bd919
        Message-Authenticator =
0x00000000000000000000000000000000
        State = 0x4756a5552099f5c02b869e15b923300c
Finished request 15
Going to the next request
--- Walking the entire request list ---
Waking up in 2 seconds...
rad_recv: Access-Request packet from host
10.10.0.10:2048, id=111, length=173
        User-Name = "ibm"
        NAS-IP-Address = 10.10.0.10
        NAS-Port = 0
        Called-Station-Id = "00e098be8e15"
        Calling-Station-Id = "000cf138bb81"
        NAS-Identifier = "Realtek Access Point. 8181"
        NAS-Port-Type = Wireless-802.11
        Service-Type = Framed-User
        Connect-Info = "CONNECT 11Mbps 802.11b"
        EAP-Message = 0x020100060319
        State = 0x4756a5552099f5c02b869e15b923300c
        Message-Authenticator =
0x6629ec8f043cf6353e8707d3a5854a4a
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 16
  modcall[authorize]: module "preprocess" returns ok
for request 16
  modcall[authorize]: module "chap" returns noop for
request 16
  modcall[authorize]: module "mschap" returns noop for
request 16
    rlm_realm: No '@' in User-Name = "ibm", looking up
realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for
request 16
  rlm_eap: EAP packet type response id 1 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP
conversation
  modcall[authorize]: module "eap" returns updated for
request 16
    users: Matched entry ibm at line 80
  modcall[authorize]: module "files" returns ok for
request 16
modcall: group authorize returns updated for request
16
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 16
  rlm_eap: Request found, released from the list
  rlm_eap: EAP NAK
 rlm_eap: EAP-NAK asked for EAP-Type/peap
 rlm_eap: No such EAP type peap
  rlm_eap: Failed in EAP select
  modcall[authenticate]: module "eap" returns invalid
for request 16
modcall: group authenticate returns invalid for
request 16
auth: Failed to validate the user.
Login incorrect: [ibm/<no User-Password attribute>]
(from client wireless port 0 cli 000cf138bb81)
Delaying request 16 for 1 seconds
Finished request 16
Going to the next request




users file contains : 

ibm     Auth-Type := EAP, User-Password == "test"
        Reply-Message = "Hello, %u"

I'm try also Radius Test (Radutils) program connect
successful. 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam
protection around 
http://mail.yahoo.com 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com