VLAN and SSID

[Antonio Matera]

hi,
ok, now the authentication request works (the problem was that if I 
restart the AP I lost this configuration. How can I save it using the 
web configuration?)

Now the log is the following:

rad_recv: Access-Request packet from host 192.168.9.104:1645, id=19, 
length=166
        User-Name = "TEST4"
        Framed-MTU = 1400
        Called-Station-Id = "0012.dacb.8420"
        Calling-Station-Id = "000c.f135.f1ba"
        Cisco-AVPair = "ssid=VLAN3"
        Service-Type = Login-User
        Message-Authenticator = 0xb2a3f1fd52d9d6ff9702cc8f1f480f46
        EAP-Message = 0x020600060d00
        NAS-Port-Type = Wireless-802.11
        Cisco-NAS-Port = "260"
        NAS-Port = 260
        State = 0x0491685cf8ece3184d685dedfedbb3d4
        NAS-IP-Address = 192.168.9.104
        NAS-Identifier = "ap"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 18
  modcall[authorize]: module "preprocess" returns ok for request 18
  modcall[authorize]: module "mschap" returns noop for request 18
    rlm_realm: No '@' in User-Name = "TEST4", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 18
  rlm_eap: EAP packet type response id 6 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 18
    users: Matched entry TEST4 at line 11
  modcall[authorize]: module "files" returns ok for request 18
modcall: leaving group authorize (returns updated) for request 18
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 18
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/tls
  rlm_eap: processing type tls
  rlm_eap_tls: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
  rlm_eap_tls: ack handshake is finished
  eaptls_verify returned 3
  eaptls_process returned 3
  rlm_eap: Freeing handler
  modcall[authenticate]: module "eap" returns ok for request 18
modcall: leaving group authenticate (returns ok) for request 18
Login OK: [TEST4/<no User-Password attribute>] (from client ap-test port 
260 cli 000c.f135.f1ba)
Sending Access-Accept of id 19 to 192.168.9.104 port 1645
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "2"
        Tunnel-Type:0 = VLAN
        MS-MPPE-Recv-Key = 
0x9cb007ac1a5c0cc6da1deaf25177ef52e7f8c195d876f95b2d18ac6106b497da
        MS-MPPE-Send-Key = 
0x5cbd4de84c364538ec07001adad683cbbf80a349d0299d4790f4f16389aff161
        EAP-Message = 0x03060004
        Message-Authenticator = 0x00000000000000000000000000000000
        User-Name = "TEST4"
Finished request 18


and I have this users:

TEST4 Auth-Type := EAP, Cisco-AVPair := "ssid=SSID1"
           Tunnel-Medium-Type = IEEE-802,
           Tunnel-Private-Group-Id = 2,
           Tunnel-Type = VLAN

user2   Auth-Type := EAP, Cisco-AVPair := "ssid=VLAN3"
           Tunnel-Medium-Type = IEEE-802,
           Tunnel-Private-Group-Id = 3,
           Tunnel-Type = VLAN



Now in the log there is Cisco-AVPair = "ssid=VLAN3" but user TEST4 is 
authenticated on the incorrect SSID (VLAN3).
I suppose that the Cisco-AVPair check doesn't work in my configuration....
Are there other mistakes?


Thanks for your answers...
Bye Antonio



>
> You misread my previous email .... you need:
> radius-server vsa send authentication
>                         ^^^^^^^^^^
>
> this makes the cisco include the ssid in the AUTHENTICATION request 
> which is what you need. Presently you only have:
> radius-server vsa send accounting
>
> so the SSID is only being sent in accounting packets.
>
> (having both is fine)
>
> Regards,
>   James
>
> -- 
> James J J Hooper,
> Information Services
> University of Bristol
> --