configuration problem in Freeradius.

[Hernan Antolini]

What's your "radiusd -X" say about it ?, you should start there.

Hernan Antolini

freeradius-users-bounces+antolini=ar.ibm.com at lists.freeradius.org wrote on 
11/15/2006 08:02:26 AM:

> 
> hi !
> i got howto of freeradius. I am configuring it on suse 10.1 n i have
> performed all steps but getting error. I tried alot to troubleshoot it 
but
> didnt get any success. So i am pasting me error here . Plz help me .
> 
> myserver:~ # radtest johndoe hello localhost 1812 password
> Sending Access-Request of id 151 to 127.0.0.1 port 1812
> 
> 
> User-Name = "johndoe"
> User-Password = "hello"
> NAS-IP-Address = 255.255.255.255
> 
> NAS-Port = 1812
> rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=151, 
length=20
> myserver:~ #
> 
> 
> ------------------------------------------------------------
> 
> myserver:~ # radiusd -X
> Module: Instantiated radutmp (radutmp)
> 
> 
> Listening on authentication *:1812
> Listening on accounting *:1813
> Ready to process requests.
> 
> rad_recv: Access-Request packet from host 127.0.0.1:1025, id=151, 
length=59
> User-Name = "johndoe"
> 
> User-Password = "hello"
> NAS-IP-Address = 255.255.255.255
> NAS-Port = 1812
> 
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 0
> 
> modcall[authorize]: module "preprocess" returns ok for request 0
> 
> modcall[authorize]: module "chap" returns noop for request 0
> 
> modcall[authorize]: module "mschap" returns noop for request 0
> 
> rlm_realm: No '@' in User-Name = "johndoe", looking up realm NULL
> 
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 0
> 
> rlm_eap: No EAP-Message, not doing EAP
> modcall[authorize]: module "eap" returns noop for request 0
> 
> users: Matched entry DEFAULT at line 157
> modcall[authorize]: module "files" returns ok for request 0
> 
> modcall: leaving group authorize (returns ok) for request 0
> rad_check_password: Found Auth-Type System
> 
> auth: type "System"
> 
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 0
> 
> modcall[authenticate]: module "unix" returns notfound for request 0
> 
> modcall: leaving group authenticate (returns notfound) for request 0
> 
> auth: Failed to validate the user.
> rad_lowerpair: User-Name now 'johndoe'
> 
> rad_lowerpair: User-Password now 'hello'
> rad_rmspace_pair: User-Name now 'johndoe'
> 
> rad_rmspace_pair: User-Password now 'hello'
> 
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 0
> 
> modcall[authorize]: module "preprocess" returns ok for request 0
> 
> modcall[authorize]: module "chap" returns noop for request 0
> 
> modcall[authorize]: module "mschap" returns noop for request 0
> 
> rlm_realm: No '@' in User-Name = "johndoe", looking up realm NULL
> rlm_realm: No such realm "NULL"
> 
> modcall[authorize]: module "suffix" returns noop for request 0
> rlm_eap: No EAP-Message, not doing EAP
> 
> modcall[authorize]: module "eap" returns noop for request 0
> 
> users: Matched entry DEFAULT at line 157
> modcall[authorize]: module "files" returns ok for request 0
> 
> modcall: leaving group authorize (returns ok) for request 0
> 
> rad_check_password: Found Auth-Type System
> auth: type "System"
> 
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 0
> 
> modcall[authenticate]: module "unix" returns notfound for request 0
> 
> modcall: leaving group authenticate (returns notfound) for request 0
> auth: Failed to validate the user.
> 
> Delaying request 0 for 1 seconds
> Finished request 0
> Going to the next request
> 
> --- Walking the entire request list ---
> Waking up in 1 seconds...
> 
> --- Walking the entire request list ---
> Waking up in 1 seconds...
> --- Walking the entire request list ---
> 
> Sending Access-Reject of id 151 to 127.0.0.1 port 1025
> Waking up in 4 seconds...
> --- 
> Walking the entire request list ---
> Cleaning up request 0 ID 151 with timestamp 455743f6
> Nothing to do. 
> Sleeping until we see a request.
> -- 
> View this message in context: http://www.nabble.com/configuration-
> problem-in-Freeradius.-tf2627693.html#a7355750
> Sent from the FreeRadius - User mailing list archive at Nabble.com.
> 
> - 
> List info/subscribe/unsubscribe? See 
http://www.freeradius.org/list/users.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20061120/096df151/attachment.html>