Mobile Phones Radius Authentications

nsuralullec nus_lived at yahoo.com.ph
Mon Oct 16 05:17:54 CEST 2006 

What i want is to authenticate Mobile WAP users to a
freeradius before using the mobile wap
gateway(Kannel), but as per the radius logs, it
successfully authenticates but it does not redirect
the mobile wap request to the wap gateway. The mobile
configurations are correct it works if the NAS doesnot
require authentications.

Logs:

rad_recv: Access-Request packet from host
10.100.80.10:21817, id=103, length=102
	User-Name = "nus at WAP"
	User-Password = "053197"
	Called-Station-Id = "nus_apn"
	Calling-Station-Id = "XXXXXXXXXXXX"    (Intentionally
omitted)
	Framed-Protocol = GPRS-PDP-Context
	NAS-Port-Type = Virtual
	NAS-Port = 60000
	Service-Type = Framed-User
	NAS-IP-Address = 10.100.80.10
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
  modcall[authorize]: module "preprocess" returns ok
for request 6
  modcall[authorize]: module "chap" returns noop for
request 6
  modcall[authorize]: module "mschap" returns noop for
request 6
    rlm_realm: Looking up realm "WAP" for User-Name =
"nus at WAP"
    rlm_realm: Found realm "WAP"
    rlm_realm: Adding Stripped-User-Name = "nus"
    rlm_realm: Proxying request from user nus to realm
WAP
    rlm_realm: Adding Realm = "WAP"
    rlm_realm: Authentication realm is LOCAL.
  modcall[authorize]: module "suffix" returns noop for
request 6
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for
request 6
    users: Matched entry DEFAULT at line 152
    users: Matched entry DEFAULT at line 171
  modcall[authorize]: module "files" returns ok for
request 6
modcall: leaving group authorize (returns ok) for
request 6
  rad_check_password:  Found Auth-Type System
auth: type "System"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
  modcall[authenticate]: module "unix" returns ok for
request 6
modcall: leaving group authenticate (returns ok) for
request 6
Sending Access-Accept of id 103 to 10.100.80.10 port
21817
	Framed-IP-Address = 255.255.255.254
	Framed-MTU = 576
	Service-Type = Framed-User
Finished request 6
Going to the next request
Waking up in 6 seconds...
rad_recv: Accounting-Request packet from host
10.100.80.10:21817, id=104, length=125
	Acct-Session-Id = "CA8A9FCA332B546"
	Framed-Protocol = GPRS-PDP-Context
	Called-Station-Id = "nus_apn"
	Calling-Station-Id = "XXXXXXXXXXXX"    (Intentionally
omitted)
	Framed-IP-Address = 10.150.192.130
	Acct-Authentic = RADIUS
	User-Name = "nus at WAP"
	Acct-Status-Type = Start
	NAS-Port-Type = Virtual
	NAS-Port = 60000
	Service-Type = Framed-User
	NAS-IP-Address = 10.100.80.10
	Acct-Delay-Time = 0
  Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 7
  modcall[preacct]: module "preprocess" returns noop
for request 7
rlm_acct_unique: Hashing 'NAS-Port =
60000,Client-IP-Address = 10.100.80.10,NAS-IP-Address
= 10.100.80.10,Acct-Session-Id =
"CA8A9FCA332B546",User-Name = "nus at WAP"'
rlm_acct_unique: Acct-Unique-Session-ID =
"fe3b2a13273eb6bc".
  modcall[preacct]: module "acct_unique" returns ok
for request 7
    rlm_realm: Looking up realm "WAP" for User-Name =
"nus at WAP"
    rlm_realm: Found realm "WAP"
    rlm_realm: Adding Stripped-User-Name = "nus"
    rlm_realm: Proxying request from user nus to realm
WAP
    rlm_realm: Adding Realm = "WAP"
    rlm_realm: Accounting realm is LOCAL.
  modcall[preacct]: module "suffix" returns noop for
request 7
  modcall[preacct]: module "files" returns noop for
request 7
modcall: leaving group preacct (returns ok) for
request 7
  Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 7
radius_xlat: 
'/usr/local/var/log/radius/radacct/10.100.80.10/detail-20061013'
rlm_detail:
/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d
expands to
/usr/local/var/log/radius/radacct/10.100.80.10/detail-20061013
  modcall[accounting]: module "detail" returns ok for
request 7
  modcall[accounting]: module "unix" returns ok for
request 7
radius_xlat:  '/usr/local/var/log/radius/radutmp'
radius_xlat:  'nus at WAP'
  modcall[accounting]: module "radutmp" returns ok for
request 7
modcall: leaving group accounting (returns ok) for
request 7
Sending Accounting-Response of id 104 to 10.100.80.10
port 21817
Finished request 7
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 5 ID 102 with timestamp 452f6d4c
Cleaning up request 6 ID 103 with timestamp 452f6d4c
Cleaning up request 7 ID 104 with timestamp 452f6d4c
Nothing to do.  Sleeping until we see a request.
rad_recv: Accounting-Request packet from host
10.100.80.10:21817, id=112, length=161
	Acct-Session-Id = "CA8A9FCA332B546"
	Framed-Protocol = GPRS-PDP-Context
	Called-Station-Id = "nus_apn"
	Calling-Station-Id = "XXXXXXXXXXXX"    (Intentionally
omitted)
	Framed-IP-Address = 10.150.192.130
	Acct-Authentic = RADIUS
	Acct-Session-Time = 19
	Acct-Input-Octets = 85
	Acct-Output-Octets = 113
	Acct-Input-Packets = 1
	Acct-Output-Packets = 1
	Acct-Terminate-Cause = User-Request
	User-Name = "nus at WAP"
	Acct-Status-Type = Stop
	NAS-Port-Type = Virtual
	NAS-Port = 60000
	Service-Type = Framed-User
	NAS-IP-Address = 10.100.80.10
	Acct-Delay-Time = 0
  Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 8
  modcall[preacct]: module "preprocess" returns noop
for request 8
rlm_acct_unique: Hashing 'NAS-Port =
60000,Client-IP-Address = 10.100.80.10,NAS-IP-Address
= 10.100.80.10,Acct-Session-Id =
"CA8A9FCA332B546",User-Name = "nus at WAP"'
rlm_acct_unique: Acct-Unique-Session-ID =
"fe3b2a13273eb6bc".
  modcall[preacct]: module "acct_unique" returns ok
for request 8
    rlm_realm: Looking up realm "WAP" for User-Name =
"nus at WAP"
    rlm_realm: Found realm "WAP"
    rlm_realm: Adding Stripped-User-Name = "nus"
    rlm_realm: Proxying request from user nus to realm
WAP
    rlm_realm: Adding Realm = "WAP"
    rlm_realm: Accounting realm is LOCAL.
  modcall[preacct]: module "suffix" returns noop for
request 8
  modcall[preacct]: module "files" returns noop for
request 8
modcall: leaving group preacct (returns ok) for
request 8
  Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 8
radius_xlat: 
'/usr/local/var/log/radius/radacct/10.100.80.10/detail-20061013'
rlm_detail:
/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d
expands to
/usr/local/var/log/radius/radacct/10.100.80.10/detail-20061013
  modcall[accounting]: module "detail" returns ok for
request 8
  modcall[accounting]: module "unix" returns ok for
request 8
radius_xlat:  '/usr/local/var/log/radius/radutmp'
radius_xlat:  'nus at WAP'
  modcall[accounting]: module "radutmp" returns ok for
request 8
modcall: leaving group accounting (returns ok) for
request 8
Sending Accounting-Response of id 112 to 10.100.80.10
port 21817
Finished request 8
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 8 ID 112 with timestamp 452f6d5f
Nothing to do.  Sleeping until we see a request.




Thanks for any help..



Nus



		
__________________________________ 
What will the world find in 2020? 
Leave a part of your 2006 in the Yahoo! Time Capsule. Contribute now! 
http://timecapsule.yahoo.com/capsule.php?intl=ph

More information about the Freeradius-Users mailing list