2.0.0pre1 not starting when reading NAS from mysql

[Roberto Greiner]

I'm having a problem with 2.0.0pre1.

I'm using a clean install. All I changed were entries to enable mysql.
The lines I uncommented where the sql entries in authorize, accounting
and session, and I commented the files entry in authorize{}. I also
commented the 'unix' line in authorize to avoid conflict with valid unix
users.

In sql.conf, besides user/pass config, I enabled the "readclients = yes"
line.

Finally, in sql/mysql-dialup.conf I uncommented simul_count_query.

When I start the server with -X, it fails the connection with the mysql
server. When I comment the line about the nas table in sql.conf, it
loads properly. Also, if I uncomment it again and leave the nas table
empty, freeradius loads properly.

My box is a Debian Etch, with freeradius being installed following the
instructions for debian on the wiki (building a .deb package and then
installing the package)

Any help is appreciated.

Thanks,

Roberto

The entry I used as sample in the nas table (note: I tried 'localhost'
instead of 127.0.0.1, with the same results):
+----+-----------+-----------+-------+-------+--------+-----------+---------------+
| id | nasname   | shortname | type  | ports | secret | community |
description   |
+----+-----------+-----------+-------+-------+--------+-----------+---------------+
| 20 | 127.0.0.1 | local     | other |  NULL | foobar | NULL      |
RADIUS Client |
+----+-----------+-----------+-------+-------+--------+-----------+---------------+

The output from freeradius -X:



Module: Linked to module rlm_sql
 Module: Instantiating sql
  sql {
        driver = "rlm_sql_mysql"
        server = "localhost"
        port = ""
        login = "xxxxxx"
        password = "xxxxxx"
        radius_db = "radius"
        sqltrace = no
        sqltracefile = "/var/log/freeradius/sqltrace.sql"
        readclients = yes
        deletestalesessions = yes
        num_sql_socks = 5
        sql_user_name = "%{User-Name}"
        default_user_profile = ""
        nas_query = "SELECT id, nasname, shortname, type, secret FROM nas"
        authorize_check_query = "SELECT id, UserName, Attribute, Value,
op           FROM radcheck           WHERE Username =
'%{SQL-User-Name}'           ORDER BY id"
        authorize_reply_query = "SELECT id, UserName, Attribute, Value,
op           FROM radreply           WHERE Username =
'%{SQL-User-Name}'           ORDER BY id"
        authorize_group_check_query = "SELECT id, GroupName, Attribute,
Value, op           FROM radgroupcheck           WHERE GroupName =
'%{Sql-Group}'           ORDER BY id"
        authorize_group_reply_query = "SELECT id, GroupName, Attribute,
Value, op           FROM radgroupreply           WHERE GroupName =
'%{Sql-Group}'           ORDER BY id"
        accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S',
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime),
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay =
%{Acct-Delay-Time:-0} WHERE AcctSessionTime=0 AND AcctStopTime=0 AND
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
        accounting_update_query = "UPDATE radacct           SET
FramedIPAddress = '%{Framed-IP-Address}',           AcctSessionTime =
'%{Acct-Session-Time}',           AcctInputOctets =
'%{Acct-Input-Octets}',           AcctOutputOctets =
'%{Acct-Output-Octets}'           WHERE AcctSessionId =
'%{Acct-Session-Id}'           AND UserName =
'%{SQL-User-Name}'           AND NASIPAddress= '%{NAS-IP-Address}'"
        accounting_update_query_alt = "INSERT into radacct
(AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId,
NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId,
CallingStationId, ServiceType, FramedProtocol, FramedIPAddress,
AcctStartDelay) values('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}',
DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0})
SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '',
'%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '0')"
        accounting_start_query = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets,
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType,
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay)
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}',
'%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '%{Acct-Delay-Time:-0}', '0')"
        accounting_start_query_alt = "UPDATE radacct SET AcctStartTime =
'%S', AcctStartDelay = '%{Acct-Delay-Time:-0}', ConnectInfo_start =
'%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND
UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
        accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S',
AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets =
'%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}',
AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time:-0}', ConnectInfo_stop = '%{Connect-Info}' WHERE
AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}'
AND NASIPAddress = '%{NAS-IP-Address}'"
        accounting_stop_query_alt = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets,
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType,
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay)
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} +
%{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}',
'%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}',
'%{Acct-Output-Octets}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time:-0}')"
        group_membership_query = "SELECT GroupName           FROM
radusergroup           WHERE UserName = '%{SQL-User-Name}'          
ORDER BY priority"
        connect_failure_retry_delay = 60
        simul_count_query = "SELECT COUNT(*) FROM radacct WHERE
UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
        simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName,
NASIPAddress, NASPortId, FramedIPAddress, CallingStationId,
FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND
AcctStopTime = 0"
        postauth_query = "INSERT into radpostauth (id, user, pass,
reply, date) values ('', '%{User-Name}',
'%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', '%S')"
        safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to dialup at localhost:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
shortname, type, secret FROM nas
rlm_sql (sql): Reserving sql socket id: 4
rlm_sql (sql): Read entry nasname=127.0.0.1,shortname=local,secret=foobar
rlm_sql (sql): Adding client 127.0.0.1 (local) to clients list
rlm_sql (sql): generate_sql_clients() returned error
rlm_sql (sql): Closing sqlsocket 4
rlm_sql (sql): Closing sqlsocket 3
rlm_sql (sql): Closing sqlsocket 2
rlm_sql (sql): Closing sqlsocket 1
rlm_sql (sql): Closing sqlsocket 0
radiusd.conf[10]: sql: Module instantiation failed.
radiusd.conf[2018] Failed to find module "sql".
radiusd.conf[1928] Failed to parse authorize section.
Errors setting up modules





-- 
  -----------------------------------------------------
                Marcos Roberto Greiner

   Os otimistas acham que estamos no melhor dos mundos
    Os pessimistas tem medo de que isto seja verdade
                                       Murphy
  -----------------------------------------------------