Login rejected. Error 691.

[pungki arianto]

I installed FreeRadius 1.1.2 on FreeBSD 6.0. I followed the HOWTO from
http://tldp.org/HOWTO/8021X-HOWTO/freeradius.html to configure the server.
When I ran radtest, it show the message like this:

Sending Access-Request of id 153 to 10.1.1.3 port 1645
        User-Name = "user at sisni"
        User-Password = "sni"
        NAS-IP-Address = 255.255.255.255
        NAS-Port = 1645
rad_recv: Access-Accept packet from host 10.1.1.3:1645, id=153, length=20

or

Sending Access-Request of id 153 to 10.1.1.3 port 1645
        User-Name = "user"
        User-Password = "sni"
        NAS-IP-Address = 255.255.255.255
        NAS-Port = 1645
rad_recv: Access-Accept packet from host 10.1.1.3:1645, id=153, length=20

The user 'user' already registered inside /etc/password:
user:*:1006:1006:user_radius_sisni:/home/user:/usr/sbin/nologin

In radius.conf , proxy_request is set to No. And the $INCLUDE
${confdir}/proxy.conf is already commented.
But I still got this message:  rlm_realm: Proxy reply, or no User-Name.
Ignoring.

This is the content from huntgroup file:
LNS-KPU-SM2     NAS-IP-Address == 10.1.1.0

This is the content from hints file
DEFAULT Suffix == "@sisni", Strip-User-Name = Yes
        Hint = "sisni",


If I tried to dial the Radius from Windows terminal, it always give me an
error like this:
*Error 691*: Access was denied because the user name and/or password was
invalid on the domain

Please help me to fix the error.
Thank you.


-Pungki



Here is the last message in  /var/log/radacct/10.1.1.0/detail-20071203

 Acct-Status-Type = Accounting-On
        NAS-IP-Address = 10.1.1.0
        NAS-Identifier = "LNS-KPU-SM2"
        Acct-Authentic = RADIUS
        Acct-Session-Id = "load:2147484043"
        Event-Timestamp = "Nov 22 2007 10:25:47 WIT"
        Acct-Delay-Time = 957324
        Client-IP-Address = 10.1.1.0
        Timestamp = 1196662186


Here is the message that show after radiusd -X command.

Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /usr/local/etc/raddb/clients.conf
Config:   including file: /usr/local/etc/raddb/eap.conf
Config:   including file: /usr/local/etc/raddb/sql.conf
 main: prefix = "/usr/local"
 main: localstatedir = "/var"
 main: logdir = "/var/log"
 main: libdir = "/usr/local/lib"
 main: radacctdir = "/var/log/radacct"
 main: hostname_lookups = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 0
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/var/log/radius.log"
 main: log_auth = no
 main: log_auth_badpass = no
 main: log_auth_goodpass = no
 main: pidfile = "/var/run/radiusd/radiusd.pid"
 main: user = "(null)"
 main: group = "(null)"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/local/sbin/checkrad"
 main: proxy_requests = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
 pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = no
 mschap: passwd = "(null)"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
 unix: cache = no
 unix: passwd = "/etc/passwd"
 unix: shadow = "/etc/shadow"
 unix: group = "/etc/group"
 unix: radwtmp = "/var/log/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
 eap: default_eap_type = "md5
eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
 preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
 preprocess: hints = "/usr/local/etc/raddb/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
 files: usersfile = "/usr/local/etc/raddb/users"
 files: acctusersfile = "/usr/local/etc/raddb/acct_users"
 files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files)
Module: Loaded detail
 detail: detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
 radutmp: filename = "/var/log/radutmp"
 radutmp: username = "%{User-Name}"
 radutmp: case_sensitive = yes
 radutmp: check_with_nas = yes
 radutmp: perm = 384
 radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1645
Listening on accounting *:1646
Ready to process requests.
rad_recv: Accounting-Request packet from host 10.1.1.0:50016, id=223,
length=80
        Acct-Status-Type = Accounting-On
        NAS-IP-Address = 10.1.1.0
        NAS-Identifier = "LNS-KPU-SM2"
        Acct-Authentic = RADIUS
        Acct-Session-Id = "load:2147484043"
        Event-Timestamp = "Nov 22 2007 10:25:47 WIT"
        Acct-Delay-Time = 952314
  Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 0
  modcall[preacct]: module "preprocess" returns noop for request 0
    rlm_realm: Proxy reply, or no User-Name.  Ignoring.
  modcall[preacct]: module "suffix" returns noop for request 0
modcall: leaving group preacct (returns noop) for request 0
  Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 0
radius_xlat:  '/var/log/radacct/10.1.1.0/detail-20071203'
rlm_detail: /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to
/var/log/radacct/10.1.1.0/detail-20071203
  modcall[accounting]: module "detail" returns ok for request 0
  modcall[accounting]: module "unix" returns noop for request 0
radius_xlat:  '/var/log/radutmp'
rlm_radutmp: NAS callback restarted (Accounting-On packet seen)
  modcall[accounting]: module "radutmp" returns ok for request 0
modcall: leaving group accounting (returns ok) for request 0
Sending Accounting-Response of id 223 to 10.1.1.0 port 50016
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Accounting-Request packet from host 10.1.1.0:50016, id=224,
length=80
        Acct-Status-Type = Accounting-On
        NAS-IP-Address = 10.1.1.0
        NAS-Identifier = "LNS-KPU-SM2"
        Acct-Authentic = RADIUS
        Acct-Session-Id = "load:2147484043"
        Event-Timestamp = "Nov 22 2007 10:25:47 WIT"
        Acct-Delay-Time = 952317
  Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 1
  modcall[preacct]: module "preprocess" returns noop for request 1
    rlm_realm: Proxy reply, or no User-Name.  Ignoring.
  modcall[preacct]: module "suffix" returns noop for request 1
modcall: leaving group preacct (returns noop) for request 1
  Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 1
radius_xlat:  '/var/log/radacct/10.1.1.0/detail-20071203'
rlm_detail: /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to
/var/log/radacct/10.1.1.0/detail-20071203
  modcall[accounting]: module "detail" returns ok for request 1
  modcall[accounting]: module "unix" returns noop for request 1
radius_xlat:  '/var/log/radutmp'
rlm_radutmp: NAS callback restarted (Accounting-On packet seen)
  modcall[accounting]: module "radutmp" returns ok for request 1
modcall: leaving group accounting (returns ok) for request 1
Sending Accounting-Response of id 224 to 10.1.1.0 port 50016
Finished request 1
Going to the next request
--- Walking the entire request list ---
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20071203/5e408e28/attachment.html>