MAC or user auth

[CoMeC]

Thanks,

What I ment with radreply, is the fact, that when the MAC user is
authentificated by RADIUS, Radius should send for example bandwith values. 
So I need to have those
some-mac-address   Attribute  Op  Value
in radreply table. Am I wrong?

All is want to achieve is:
I would like to have Abo-Users (time limitation for one month), with a
specified bandwidth parameters.
The thing is that users can have more computers. That is why I would like
to authenticate those computers with MAC, but they should work
simultanously using together specified bandwidth. (there is a simultanous
option :) )
Practically: one billing user with specified bandwidth, but with no
computer limitation, and with no user/password authentification at the same
time.

Only for real hotspot users, there will be a user and password. But it will
be handled by another NAS.

Everything will work with the use of Mikrotik routers :)

Any other possibilities to solve that problem? :)

Best regards,

CoMeC


On Wed, 12 Dec 2007 14:17:10 +0100, <tnt at kalik.co.yu> wrote:
> No, radcheck.
> 
> 1. Enable mac auth in hotspot profile (login-by=mac) - mac address will
> be checked first, if there is no match user will be sent to the login
> form
> 
> 2. For mac addresses make such entries in radcheck:
> 
> UserName   Attribute  Op  Value
> some-mac-address   Auth-Type   :=   Accept
> 
> 3. For users make stanard radcheck entries:
> 
> UserName   Attribute  Op  Value
> someuser   Cleartext-Password   :=   somepass
> 
> Ivan Kalik
> Kalik Informatika ISP
> 
> 
> Dana 12/12/2007, "CoMeC" <comec at e-comec.com> piše:
> 
>>Ok,
>>
>>thanks, 
>>
>>so in radreply I have to use:
>>
>>some-mac-address   Attribute  Op  Value
>>
>>?
>>
>>
>>Thx,
>>
>>CoMeC
>>
>>
>>On Wed, 12 Dec 2007 13:17:41 +0100, <tnt at kalik.co.yu> wrote:
>>> MAC address in mac auth is sent as User-Name not Calling-Station-Id.
>>> 
>>> So, for mac auth:
>>> 
>>> some-mac-add-ress   Auth-Type := Accept
>>> 
>>> For a user:
>>> 
>>> username   Clertext-Password := "hispassword"
>>> 
>>> Ivan Kalik
>>> Kalik Informatika ISP
>>> 
>>> 
>>> Dana 12/12/2007, "CoMeC" <comec at e-comec.com> piĹĄe:
>>> 
>>>>Hi,
>>>>
>>>>I try to configure such a solution:
>>>>
>>>>Authorization via MAC Address (with no username required) - if the
>>> machine
>>>>is using a valid IP Address, it is automatically allowed to surf.
>>>>(I know there is a Calling-Station-id attribute in radcheck)
>>>>
>>>>
>>>>But I need also a support for username/password authentification (via
>>> WWW)
>>>>too.
>>>>
>>>>When I try to log in only with MAC, I get a Radius responce "no
>>> username",
>>>>and the machine is denied.
>>>>
>>>>How/where in radiusd.conf can I make changes?
>>>>
>>>>Thx in advance,
>>>>
>>>>Best regards,
>>>>
>>>>CoMeC
>>>>
>>>>-
>>>>List info/subscribe/unsubscribe? See
>>> http://www.freeradius.org/list/users.html
>>>>
>>>>
>>> 
>>> -
>>> List info/subscribe/unsubscribe? See
>>> http://www.freeradius.org/list/users.html
>>
>>-
>>List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
> 
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html