Question about nt-domain.

[Hangjun He]

Hi, 
    FreeRADIUS 1.1.6.
  Use users file as user store. When I use username/password, It can work.
  When I user username/password/domain, It not work.
  I try to set preprocess module with_ntdomain_hack = yes. I get "rlm_eap: Identity does not match User-Name, setting from EAP Identity."
  I try to add with_ntdomain_hack = yes in mschap module, It does not work.
   
  Ready to process requests.
rad_recv: Access-Request packet from host 10.155.20.84:1030, id=1, length=166
        User-Name = "HH\\hhe123"
        NAS-IP-Address = 10.155.20.84
        NAS-Identifier = "AH-000030"
        NAS-Port = 0
        Called-Station-Id = "00-19-77-00-00-34:hhe"
        Calling-Station-Id = "00-19-E0-80-A5-5A"
        Framed-MTU = 1500
        NAS-Port-Type = Wireless-802.11
        Connect-Info = "CONNECT 11Mbps 802.11b"
        EAP-Message = 0x0224000e0148485c686865313233
        Message-Authenticator = 0xe02bcaa4c6065250f6dcd3ccd60386f6
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "hhe123", looking up realm NULL
    rlm_realm: Found realm "NULL"
    rlm_realm: Proxying request from user hhe123 to realm NULL
    rlm_realm: Adding Realm = "NULL"
    rlm_realm: Authentication realm is LOCAL.
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: EAP packet type response id 36 length 14
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 0
    users: Matched entry hhe123 at line 95
  modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: Identity does not match User-Name, setting from EAP Identity.
  rlm_eap: Failed in handler
  modcall[authenticate]: module "eap" returns invalid for request 0
modcall: leaving group authenticate (returns invalid) for request 0
auth: Failed to validate the user.
Sending Access-Reject of id 1 to 10.155.20.84 port 1030
        Reply-Message = "Hello"
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
   
   
  John

       
---------------------------------
天生购物狂，狂抢购物券，你还等什么！ 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20071214/d20895c2/attachment.html>