freeradius server and access point do not communicate each other

[Gianni Socionovo]

2007/12/18, Alan DeKok <aland at deployingradius.com>:
>
> Gianni Socionovo wrote:
> > I set up a free radius server (IP 10.1.1.1) and i
> > checked that is on.
> > I set up a wireless access point (D-LINK DLW3200 AP, IP 10.1.1.2)
> > with wpa2-enterprise  authentication settings.
> > In the screen of DWL authentication setting i  set 10.1.1.1 as
> > radius server and "radiussecret" as Radius Secret.
> > In freeradius configuration file clients.conf i added the following:
> >
> > client
> > 10.1.1.2 {
>
>   Is it really on two lines like that?  If so, why?


No in clients.conf all is only in one line.

...
> > I lauched the command:
> >
> > radtest test testpwd
> > 10.1.1.2  0 radiussecret and i got the following message:
> >
> > radclient: no response from server for ID xx.
>
>   Is the RADIUS server *running*?  Have you tried starting it from the
> command-line in debugging mode, as suggested in the README, FAQ,
> INSTALL, and daily on this list?


I launched radiu server with command freeradius -XXX -A  and i got no
errors.

  Alan DeKok.
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20071218/fabd8625/attachment.html>