Problems With EAP

Anuj Tripathi anujt at it.iitb.ac.in
Wed Feb 21 11:58:41 CET 2007


Hi All

I am a newbie to freeradius. I am trying to use freeradius as an 
authentication server along with a WRT54G Linksys (Cisco) access point.

On the client side i have a windows machine where i have enabled PEAP 
authentication, through which it asks me for user name and password.

The problem i am facing is that the Radius server is not getting 
password, and hence not authenticating. Following is a snippet of the 
log i got :

rad_recv: Access-Request packet from host 10.129.20.111:2863, id=0, 
length=169
--- Walking the entire request list ---
Waking up in 31 seconds...
Threads: total/active/spare threads = 5/0/5
Thread 1 got semaphore
Thread 1 handling request 0, (1 handled so far)
        Message-Authenticator = 0xd75320cd909f5132bb834f1196e6f5b3
        Service-Type = Framed-User
        User-Name = "steve"
        Framed-MTU = 1488
        Called-Station-Id = "00-18-F8-64-80-D9:ANUJ"
        Calling-Station-Id = "00-17-9A-D1-9F-B7"
        NAS-Port-Type = Wireless-802.11
        Connect-Info = "CONNECT 54Mbps 802.11g"
        EAP-Message = 0x0200000a017374657665
        NAS-IP-Address = 10.129.20.111
        NAS-Port = 7
        NAS-Port-Id = "STA port # 7"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "steve", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: EAP packet type response id 0 length 10
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 0
    users: Matched entry steve at line 80
  modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
  rad_check_password:  Found Auth-Type Local
auth: type Local
*auth: No User-Password or CHAP-Password attribute in the request*
*auth: Failed to validate the user.*
*Login incorrect: [steve/<no User-Password attribute>] (from client 
localhost port 7 cli 00-17-9A-D1-9F-B7)*
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
Thread 1 waiting to be assigned a request
rad_recv: Access-Request packet from host 10.129.20.111:2863, id=0, 
length=169
Sending Access-Reject of id 0 to 10.129.20.111 port 2863
--- Walking the entire request list ---
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 0 with timestamp 45dc2565
Nothing to do.  Sleeping until we see a request.



My Client file reads :

steve   Auth-Type := Local, User-Password == "testing"
        Service-Type = Framed-User,
        Framed-Protocol = PPP



Am I missing out on something ? Kindly help me with this as soon as 
possible. Its a little urgent.

regards,
Anuj Tripathi




More information about the Freeradius-Users mailing list