One question about Access-Request packet

[Thibault Le Meur]

> Hi, i have one question:
> 
> Why when i try auth. by laptop-wifi over linksys then it's send that
> request:
> 
> rad_recv: Access-Request packet from host 192.168.1.245:3072, 
> id=0, length=119
>         User-Name = "rka"
>         NAS-IP-Address = 192.168.1.245
>         Called-Station-Id = "001217694588"
>         Calling-Station-Id = "0014a41e7112"
>         NAS-Identifier = "001217694588"
>         NAS-Port = 61
>         Framed-MTU = 1400
>         NAS-Port-Type = Wireless-802.11
>         EAP-Message = 0x0201000801726b61
>         Message-Authenticator = 0x794e9d729e673a6c41b875855ae5a464
> 
> Request without User-Password -> and that is problem with auth.

This is normal because it is an EAP authentication request: so this is not a
problem for authentication as long as you have enabled and configured EAP in
the freeradius configuration (see eap.conf).

Thibault