How to configure EAP Identity in 1.1.3

[tnt at kalik.co.yu]

>rlm_eap_md5: Issuing Challenge
>  modcall[authenticate]: module "eap" returns handled for request 1
>modcall: leaving group authenticate (returns handled) for request 1
>Sending Access-Challenge of id 60 to 127.0.0.1 port 32825
>        CUI = "jrccui"
>        Class = 0x6a7263636c617373
>        State = 0x6a72637374617465
>        Framed-MTU = 1400
>        Framed-IP-Address = 1.2.3.4
>        Service-Type = Framed-User
>        Session-Timeout = 30
>        MS-MPPE-Send-Key = 0x6a72636d736b
>        MS-MPPE-Recv-Key = 0x6a7263726563766d736b
>        AAA-Session-Id = "jrcmultisessionid"
>        HA-IP-MIP4 = 1.1.1.1
>        DHCPv4-Server = 2.2.2.2
>        MN-HA-MIP4-KEY = "jrcmipkey"
>        MN-HA-MIP4-SPI = "jrcmipspi"
>        DHCP-RK = "jrcdhcprk"
>        DHCP-RK-KEY-ID = "jrcdhcpkey"
>        DHCP-RK-LIFETIME = "20"
>        EAP-Message = 0x01d300160410e0ccb378852f7a673815379d2f819db1
>        Message-Authenticator = 0x00000000000000000000000000000000
>        State = 0x8343fbb52835fa0fb7fb84cab7f7a0db
>Finished request 1
>Going to the next request
>--- Walking the entire request list ---
>Waking up in 6 seconds...
>rad_recv: Access-Request packet from host 127.0.0.1:32825, id=61, length=155
>        User-Name = "jrc"
>        User-Password = "jrc"
>        NAS-Identifier = "jrcnas"
>        NAS-Port-Type = Ethernet
>        CUI = "0"
>        Service-Type = Framed-User
>        Framed-MTU = 1400
>        Calling-Station-Id = "1:1:1:1:1:1"
>        Message-Authenticator = 0x8dc52d59961b5eb7d8789f7cb4dbea5a
>        State = 0x6a72637374617465
>        State = 0x8343fbb52835fa0fb7fb84cab7f7a0db
>        EAP-Message = 0x02d300160410d3ab9cde585da0c10b343d38433fa0db

Something is wrong with your client. There are two State entries in this
reply. The one that doesn't match the Challenge is breaking EAP
conversation.

Ivan Kalik
Kalik Informatika ISP