won't work on large users file

[tnt at kalik.co.yu]

What doesn't work? Can you post radiusd -X output for the test user.

In 1.1.6 you should use Cleartext-Password as attribute and := as
operator. If those reply items are the same for all the users you can
put them in a single DEFAULT entry and not in every user config. You
already have such entries for Framed-User and PPP in original users file.

Ivan Kalik
Kalik Informatika ISP


Dana 2/6/2007, "Jeff" <jeffa at jahelpdesk.com> piše:

>Has any one had this issue?
>Large users file appx 900 users with each users template as follows
>I don't know if its a corrupt line some where or not but the file is auto generated by Rodopi so
>i would think its not that
>
>heres what the users template is..
>
># 2353731881 -- First User
>testuser	Password = "testpw"
>	Framed-Protocol = PPP,
>	Service-Type = Framed-User,
>	Session-Timeout = 14400,
>	Port-Limit = 1,
>	Ascend-Data-Filter = "ip in forward tcp est",
>	Ascend-Data-Filter = "ip in forward dstip 74.218.65.132/32",
>	Ascend-Data-Filter = "ip in forward dstip 74.218.65.133/32",
>	Ascend-Data-Filter = "ip in forward dstip 204.13.240.3/32",
>	Ascend-Data-Filter = "ip in forward dstip 204.13.240.3/32",
>	Ascend-Data-Filter = "ip in drop tcp dstport = 25",
>	Ascend-Data-Filter = "ip in forward"
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>