1.1.6 initial testing
Debashis Prusty
dprusty at systemsfusion.com
Thu Jun 21 15:31:13 CEST 2007
Please make some changes in your radiusd.conf file as shown below &
comment out the line "edir_account_policy_check=no".
authorise { preprocess chap mschap #counter #attr_filter #eap suffix sql
#files #etc_smbpasswd } authenticate { authtype PAP { pap } authtype
CHAP { chap } authtype MS-CHAP{ mschap } #pam #unix #authtype LDAP { #
ldap #} } preacct { preprocess suffix #files } accounting { acct_unique
detail #counter unix sql radutmp #sradutmp } session { radutmp }
Andrew Long wrote:
> 1st run, using MYSQL. Testing on localhost, I find I cannot authenticate
> using an entry in user or one in the sql...
>
> Starting - reading configuration files ...
> reread_config: reading radiusd.conf
> Config: including file: /etc/raddb/proxy.conf
> Config: including file: /etc/raddb/clients.conf
> Config: including file: /etc/raddb/snmp.conf
> Config: including file: /etc/raddb/eap.conf
> Config: including file: /etc/raddb/sqlcounter.conf
> Config: including file: /etc/raddb/sql.conf
> main: prefix = "/usr"
> main: localstatedir = "/var"
> main: logdir = "/var/log/radius"
> main: libdir = "/usr/lib"
> main: radacctdir = "/var/log/radius/radacct"
> main: hostname_lookups = no
> main: max_request_time = 30
> main: cleanup_delay = 5
> main: max_requests = 1024
> main: delete_blocked_requests = 0
> main: port = 0
> main: allow_core_dumps = no
> main: log_stripped_names = no
> main: log_file = "/var/log/radius/radius.log"
> main: log_auth = no
> main: log_auth_badpass = no
> main: log_auth_goodpass = no
> main: pidfile = "/var/run/radiusd/radiusd.pid"
> main: user = "radiusd"
> main: group = "radiusd"
> main: usercollide = no
> main: lower_user = "no"
> main: lower_pass = "no"
> main: nospace_user = "no"
> main: nospace_pass = "no"
> main: checkrad = "/usr/sbin/checkrad"
> main: proxy_requests = no
> proxy: retry_delay = 5
> proxy: retry_count = 3
> proxy: synchronous = no
> proxy: default_fallback = yes
> proxy: dead_time = 120
> proxy: post_proxy_authorize = no
> proxy: wake_all_if_all_dead = no
> security: max_attributes = 200
> security: reject_delay = 0
> security: status_server = no
> main: debug_level = 0
> read_config_files: reading dictionary
> read_config_files: reading naslist
> Using deprecated naslist file. Support for this will go away soon.
> read_config_files: reading clients
> read_config_files: reading realms
> radiusd: entering modules setup
> Module: Library search path is /usr/lib
> Module: Loaded exec
> exec: wait = yes
> exec: program = "(null)"
> exec: input_pairs = "request"
> exec: output_pairs = "(null)"
> exec: packet_type = "(null)"
> rlm_exec: Wait=yes but no output defined. Did you mean output=none?
> Module: Instantiated exec (exec)
> Module: Loaded expr
> Module: Instantiated expr (expr)
> Module: Loaded PAP
> pap: encryption_scheme = "crypt"
> pap: auto_header = yes
> Module: Instantiated pap (pap)
> Module: Loaded CHAP
> Module: Instantiated chap (chap)
> Module: Loaded MS-CHAP
> mschap: use_mppe = yes
> mschap: require_encryption = no
> mschap: require_strong = no
> mschap: with_ntdomain_hack = no
> mschap: passwd = "(null)"
> mschap: ntlm_auth = "(null)"
> Module: Instantiated mschap (mschap)
> Module: Loaded preprocess
> preprocess: huntgroups = "/etc/raddb/huntgroups"
> preprocess: hints = "/etc/raddb/hints"
> preprocess: with_ascend_hack = no
> preprocess: ascend_channels_per_line = 23
> preprocess: with_ntdomain_hack = no
> preprocess: with_specialix_jetstream_hack = no
> preprocess: with_cisco_vsa_hack = no
> preprocess: with_alvarion_vsa_hack = no
> Module: Instantiated preprocess (preprocess)
> Module: Loaded realm
> realm: format = "suffix"
> realm: delimiter = "@"
> realm: ignore_default = no
> realm: ignore_null = no
> Module: Instantiated realm (suffix)
> Module: Loaded files
> files: usersfile = "/etc/raddb/users"
> files: acctusersfile = "/etc/raddb/acct_users"
> files: preproxy_usersfile = "/etc/raddb/preproxy_users"
> files: compat = "no"
> Module: Instantiated files (files)
> Module: Loaded SQL
> sql: driver = "rlm_sql_mysql"
> sql: server = "localhost"
> sql: port = ""
> sql: login = "radiusd"
> sql: password = "********"
> sql: radius_db = "radius"
> sql: nas_table = "nas"
> sql: sqltrace = no
> sql: sqltracefile = "/var/log/radius/sqltrace.sql"
> sql: readclients = no
> sql: deletestalesessions = yes
> sql: num_sql_socks = 5
> sql: sql_user_name = "%{User-Name}"
> sql: default_user_profile = ""
> sql: query_on_not_found = no
> sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id"
> sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id"
> sql: authorize_group_check_query = "SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id"
> sql: authorize_group_reply_query = "SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id"
> sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
> sql: accounting_update_query = "UPDATE radacct SET FramedIPAddress = '%{Framed-IP-Address}', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}'"
> sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0')"
> sql: accounting_start_query = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
> sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
> sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
> sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
> sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}'"
> sql: connect_failure_retry_delay = 60
> sql: simul_count_query = ""
> sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
> sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', NOW())"
> sql: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
> rlm_sql (sql): Attempting to connect to radiusd at localhost:/radius
> rlm_sql (sql): starting 0
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
> rlm_sql_mysql: Starting connect to MySQL server for #0
> rlm_sql (sql): Connected new DB handle, #0
> rlm_sql (sql): starting 1
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
> rlm_sql_mysql: Starting connect to MySQL server for #1
> rlm_sql (sql): Connected new DB handle, #1
> rlm_sql (sql): starting 2
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
> rlm_sql_mysql: Starting connect to MySQL server for #2
> rlm_sql (sql): Connected new DB handle, #2
> rlm_sql (sql): starting 3
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
> rlm_sql_mysql: Starting connect to MySQL server for #3
> rlm_sql (sql): Connected new DB handle, #3
> rlm_sql (sql): starting 4
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
> rlm_sql_mysql: Starting connect to MySQL server for #4
> rlm_sql (sql): Connected new DB handle, #4
> Module: Instantiated sql (sql)
> Module: Loaded SQL Counter
> sqlcounter: counter-name = "Max-All-Session-Time"
> sqlcounter: check-name = "Max-All-Session"
> sqlcounter: reply-name = "(null)"
> sqlcounter: key = "User-Name"
> sqlcounter: sqlmod-inst = "sql"
> sqlcounter: query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{%k}'"
> sqlcounter: reset = "never"
> sqlcounter: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> rlm_sqlcounter: Reply attribute set to Session-Timeout.
> rlm_sqlcounter: Counter attribute Max-All-Session-Time is number 1830
> rlm_sqlcounter: Check attribute Max-All-Session is number 1831
> rlm_sqlcounter: Current Time: 1182427829 [2007-06-21 08:10:29], Next reset 0 [2007-06-21 08:00:00]
> rlm_sqlcounter: Current Time: 1182427829 [2007-06-21 08:10:29], Prev reset 0 [2007-06-21 08:00:00]
> Module: Instantiated sqlcounter (noresetcounter)
> sqlcounter: counter-name = "Daily-Session-Time"
> sqlcounter: check-name = "Max-Daily-Session"
> sqlcounter: reply-name = "(null)"
> sqlcounter: key = "User-Name"
> sqlcounter: sqlmod-inst = "sql"
> sqlcounter: query = "SELECT SUM(AcctSessionTime - GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='%{%k}' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'"
> sqlcounter: reset = "daily"
> sqlcounter: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> rlm_sqlcounter: Reply attribute set to Session-Timeout.
> rlm_sqlcounter: Counter attribute Daily-Session-Time is number 1832
> rlm_sqlcounter: Check attribute Max-Daily-Session is number 1833
> rlm_sqlcounter: Current Time: 1182427829 [2007-06-21 08:10:29], Next reset 1182484800 [2007-06-22 00:00:00]
> rlm_sqlcounter: Current Time: 1182427829 [2007-06-21 08:10:29], Prev reset 1182398400 [2007-06-21 00:00:00]
> Module: Instantiated sqlcounter (dailycounter)
> sqlcounter: counter-name = "Monthly-Session-Time"
> sqlcounter: check-name = "Max-Monthly-Session"
> sqlcounter: reply-name = "(null)"
> sqlcounter: key = "User-Name"
> sqlcounter: sqlmod-inst = "sqlcca3"
> sqlcounter: query = "SELECT SUM(AcctSessionTime - GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='%{%k}' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'"
> sqlcounter: reset = "monthly"
> sqlcounter: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> rlm_sqlcounter: Reply attribute set to Session-Timeout.
> rlm_sqlcounter: Counter attribute Monthly-Session-Time is number 1834
> rlm_sqlcounter: Check attribute Max-Monthly-Session is number 1835
> rlm_sqlcounter: Current Time: 1182427829 [2007-06-21 08:10:29], Next reset 1183262400 [2007-07-01 00:00:00]
> rlm_sqlcounter: Current Time: 1182427829 [2007-06-21 08:10:29], Prev reset 1180670400 [2007-06-01 00:00:00]
> Module: Instantiated sqlcounter (monthlycounter)
> Module: Loaded Acct-Unique-Session-Id
> acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
> Module: Instantiated acct_unique (acct_unique)
> Module: Loaded detail
> detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
> detail: detailperm = 384
> detail: dirperm = 493
> detail: locking = no
> Module: Instantiated detail (detail)
> Module: Loaded System
> unix: cache = no
> unix: passwd = "(null)"
> unix: shadow = "/etc/shadow"
> unix: group = "(null)"
> unix: radwtmp = "/var/log/radius/radwtmp"
> unix: usegroup = no
> unix: cache_reload = 600
> Module: Instantiated unix (unix)
> Module: Loaded radutmp
> radutmp: filename = "/var/log/radius/radutmp"
> radutmp: username = "%{User-Name}"
> radutmp: case_sensitive = yes
> radutmp: check_with_nas = yes
> radutmp: perm = 384
> radutmp: callerid = yes
> Module: Instantiated radutmp (radutmp)
> Module: Loaded eap
> eap: default_eap_type = "md5"
> eap: timer_expire = 60
> eap: ignore_unknown_eap_types = no
> eap: cisco_accounting_username_bug = no
> rlm_eap: Loaded and initialized type md5
> rlm_eap: Loaded and initialized type leap
> gtc: challenge = "Password: "
> gtc: auth_type = "PAP"
> rlm_eap: Loaded and initialized type gtc
> mschapv2: with_ntdomain_hack = no
> rlm_eap: Loaded and initialized type mschapv2
> Module: Instantiated eap (eap)
> Listening on authentication *:1812
> Listening on accounting *:1813
> Ready to process requests.
> ============================================================================
> rad_recv: Access-Request packet from host 127.0.0.1:40620, id=221, length=57
> User-Name = "along"
> User-Password = "testing"
> NAS-IP-Address = 255.255.255.255
> NAS-Port = 0
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 0
> modcall[authorize]: module "preprocess" returns ok for request 0
> modcall[authorize]: module "chap" returns noop for request 0
> modcall[authorize]: module "mschap" returns noop for request 0
> rlm_realm: No '@' in User-Name = "along", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 0
> rlm_eap: No EAP-Message, not doing EAP
> modcall[authorize]: module "eap" returns noop for request 0
> users: Matched entry DEFAULT at line 153
> users: Matched entry along at line 218
> modcall[authorize]: module "files" returns ok for request 0
> rlm_pap: Found existing Auth-Type, not changing it.
> modcall[authorize]: module "pap" returns noop for request 0
> modcall: leaving group authorize (returns ok) for request 0
> rad_check_password: Found Auth-Type System
> auth: type "System"
> Processing the authenticate section of radiusd.conf
> modcall: entering group authenticate for request 0
> rlm_unix: [along]: invalid password
> modcall[authenticate]: module "unix" returns reject for request 0
> modcall: leaving group authenticate (returns reject) for request 0
> auth: Failed to validate the user.
> Delaying request 0 for 1 seconds
> Finished request 0
> ============================================================================
> >From "users" file:
>
> # Test Entries
> along Cleartext-Password := "testing"
> ============================================================================
>
> Thanks for any help...
>
> - Andrew Long
>
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20070621/8f0536b6/attachment.html>
More information about the Freeradius-Users
mailing list