"Clear text password not available"
tnt at kalik.co.yu
tnt at kalik.co.yu
Tue Jun 26 13:15:38 CEST 2007
Yes. The one you are using is years out of date.
Ivan Kalik
Kalik Informatika ISP
Dana 26/6/2007, "Flavio Silvestrone" <drascii at gmail.com> piše:
>I modified the users file with:
>
># DEFAULT Auth-Type = System
># Fall-Through = 1
>
>and
>
>flavio User-Password == "flavio"
> Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Framed-IP-Address = 10.1.1.8,
> Framed-IP-Netmask = 255.255.255.0,
> Framed-Routing = Broadcast-Listen,
># Framed-Filter-Id = "std.ppp",
> Framed-MTU = 1500,
># Framed-Compression = Van-Jacobsen-TCP-IP
>
>But the problem persist .
>Do you think that is better to use a new version of freeradius ?
>
>Tx.
>
>2007/6/25, Dennis Skinner <dskinner at bluefrog.com>:
>>
>> Kevin Bonner wrote:
>> > On Monday 25 June 2007 12:45:15 Flavio Silvestrone wrote:
>> >>> If you are using a recent version of freeradius, you should have the
>> > ...
>> >> The version of radius is "freeradius-1.0.1-3".
>> >
>> > 1.0.1 is not recent. Use 1.1.6.
>> >
>> >> flavio Cleartext-Password := "flavio"
>> >> Service-Type = Framed-User,
>> >> Framed-Protocol = PPP,
>> >> Framed-IP-Address = 10.1.1.8,
>> >> Framed-IP-Netmask = 255.255.255.0,
>> >> Framed-Routing = Broadcast-Listen,
>> >> # Framed-Filter-Id = "std.ppp",
>> >> Framed-MTU = 1500,
>> >> # Framed-Compression = Van-Jacobsen-TCP-IP
>> >
>> > Since you're using such an old version of freeradius, you cannot use
>> > Cleartext-Password here as it was available in 1.1.5 (I think) and later
>> > versions. You can use User-Password, but you should upgrade to a newer
>> > version.
>>
>> Probably should also get rid of:
>>
>> DEFAULT Auth-Type = System
>> Fall-Through = 1
>>
>> Futher up in the users file. It doesn't look like you are trying to use
>> the /etc/passwd file, which I think is what System is for.
>>
>> In general, never set Auth-Type.
>>
>> --
>> Dennis Skinner
>> Systems Administrator
>> BlueFrog Internet
>> http://www.bluefrog.com
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>>
>
>
More information about the Freeradius-Users
mailing list