Help: eap/peap + 8021x + freeradius + Win2k3/AD

[Hangjun He]

   Hi, list
       
       I have no samba installed in my linux.
   
  1.freeradius + AD : 
       When I user radtest tool to test user/password on Win2k3/AD, I can get correct answer when I set authenticate type to ldap too.
   
  2.eap/peap + 8021x + freeradius + openldap: 
      Success.
   
  3.eap/peap + 8021x + freeradius + Win2k3/AD
      When I auth the Winxp user access to switch. It failed. Even if I set Authenticate type to ldap or not, why?? 
   
  rad_recv: Access-Request packet from host 10.155.20.84:1077, id=179, length=206
        User-Name = "hwang"
        NAS-IP-Address = 10.155.20.84
        NAS-Identifier = "hiveos"
        NAS-Port = 0
        Called-Station-Id = "00-19-77-00-00-34:hhe"
        Calling-Station-Id = "00-19-E0-80-A5-5A"
        Framed-MTU = 1500
        NAS-Port-Type = Wireless-802.11
        Connect-Info = "CONNECT 11Mbps 802.11b"
        EAP-Message = 0x0237002b19001703010020ee2ceed58c0ee38c2943f392498a1d0ce71f57156ed1e81ea1ae15ad61a5f53b
        State = 0x00bebc716634b88b8ea1ecd2216ccf25
        Message-Authenticator = 0xec79f9c13e33bd20c35a6a6a7d6f291d
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 65
  modcall[authorize]: module "mschap" returns noop for request 65
    rlm_realm: No '@' in User-Name = "hwang", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 65
  rlm_eap: EAP packet type response id 55 length 43
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 65
rlm_ldap: - authorize
rlm_ldap: performing user authorization for hwang
radius_xlat:  '(cn=hwang)'
radius_xlat:  'cn=users,dc=aehve,dc=com'
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in cn=users,dc=aehve,dc=com, with filter (cn=hwang)
rlm_ldap: checking if remote access for hwang is allowed by cn
rlm_ldap: looking for check items in directory...
rlm_ldap: looking for reply items in directory...
rlm_ldap: user hwang authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
  modcall[authorize]: module "ldap" returns ok for request 65
modcall: leaving group authorize (returns updated) for request 65
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 65
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Received EAP-TLV response.
  rlm_eap_peap: Tunneled data is valid.
  rlm_eap_peap:  Had sent TLV failure.  User was rejcted rejected earlier in this session.
 rlm_eap: Handler failed in EAP/peap
  rlm_eap: Failed in EAP select
  modcall[authenticate]: module "eap" returns invalid for request 65
modcall: leaving group authenticate (returns invalid) for request 65
auth: Failed to validate the user.
Sending Access-Reject of id 179 to 10.155.20.84 port 1077
        EAP-Message = 0x04370004

   
   
    Thanks!
   
   John
   



       
---------------------------------
抢注雅虎免费邮箱3.5G容量，20M附件！ 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20070627/a555a80f/attachment.html>