freeradius, ldap error - HELP ME!

[peppeska]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Alan DeKok ha scritto:
> peppeska wrote:
>> Now my configuration in user file is:
>>
>> DEFAULT Auth-Type = "LDAP"
>>         Fall-Through = 1
> 
>   Can you explain why you're setting Auth-Type?  All of the docs say to
> NOT DO THAT.

ooooook
I comment that

but now:

rad_recv: Access-Request packet from host 127.0.0.1:1030, id=66, length=54
        Service-Type = Framed-User
        Framed-Protocol = PPP
        User-Name = "peppeska"
        NAS-IP-Address = 127.0.0.1
        NAS-Port = 0
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "peppeska", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 0
    users: Matched entry DEFAULT at line 173
    users: Matched entry DEFAULT at line 185
  modcall[authorize]: module "files" returns ok for request 0
rlm_ldap: - authorize
rlm_ldap: performing user authorization for peppeska
radius_xlat:  '(cn=peppeska)'
radius_xlat:  'dc=example'
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to localhost:389, authentication 0
rlm_ldap: bind as cn=admin,dc=example/root to localhost:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in dc=example, with filter (cn=peppeska)
rlm_ldap: looking for check items in directory...
rlm_ldap: looking for reply items in directory...
rlm_ldap: user peppeska authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
  modcall[authorize]: module "ldap" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0
auth: No authenticate method (Auth-Type) configuration found for the
request: Rejecting the user
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
auth: Failed to validate the user.
Login incorrect: [peppeska/<no User-Password attribute>] (from client
localhost port 0)
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
- --- Walking the entire request list ---
Waking up in 1 seconds...
- --- Walking the entire request list ---
Sending Access-Reject of id 66 to 127.0.0.1 port 1030
Cleaning up request 0 ID 66 with timestamp 46010854
Nothing to do.  Sleeping until we see a request.



> 
>> But the output now is:
>>
>> rad_recv: Access-Request packet from host 127.0.0.1:1030, id=65, length=54
> ...
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> ->Where is User-Password attribute?
> 
>   Ask the NAS.
> 

what?

> 


- --
  <<<<---------------------------------------------------------->>>>
  |Giuseppe Moscato aka peppeska - Linux User - no html messages---|

  |donpeppiniello at tiscali.it - http://peppeska.altervista.org------|

  |Fingerprint = 90DC 05A8 2D65 BC04 BD1B  4C07 C389 434B 3201 319D|
  <<<<---------------------------------------------------------->>>>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFGAQj5kA6hcnFZI/YRAsKoAKCXuWuZ4YpaZpYqs/iyqHfu50j9EwCgrGOh
6G3Y8O4ZhWZESvofWdiOEAY=
=UNNH
-----END PGP SIGNATURE-----