SNMP support for radius problem

[Kevin Bonner]

On Wednesday 28 March 2007 08:17:00 satish patel wrote:
>  main: smux_password = "verysecret"
>  main: snmp_write_access = no
> SMUX connect try 1
> SMUX open oid: 1.3.6.1.4.1.3317.1.3.1
> SMUX open progname: radiusd
> SMUX open password: verysecret
> SMUX register oid: 1.3.6.1.2.1.67.1.1.1.1
> SMUX register priority: -1
> SMUX register operation: 1
> SMUX register oid: 1.3.6.1.2.1.67.2.1.1.1
> SMUX register priority: -1
> SMUX register operation: 1
> Listening on authentication *:1812
> Listening on accounting *:1813
> Ready to process requests.
> SMUX read start
> SMUX read len: 12
> SMUX message received type: 67 rest len: 4
> SMUX_RRSP
> SMUX_RRSP value: 0 errstat: 0
> --- Walking the entire request list ---
> Nothing to do.  Sleeping until we see a request.

This looks good.  It successfully registered with the local SNMP daemon, which 
means FreeRADIUS is built with SNMP support and is properly configured.

> Now i have run snmpwalk but i didnt get any output from radius
>
> $snmpwalk -v 1 -c public localhost .1.3.6.1.2.1.67.1.1.1.1
> End of MIB

This looks correct as well.  Make sure the public community has permission to 
view that OID tree.  I did test my local SNMP config and receive the same 
results when I restrict the public community from accessing that OID.

Kevin Bonner
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20070328/45f3e30b/attachment.pgp>