ttls problem
tevfik
tevfikkiziloren at gmail.com
Thu May 10 09:41:14 CEST 2007
>did you configure SecureW2 to allow new connections?
Yes i tried both combinations, nothing is changed.
In addition to this when I enter correct username but wrong password, I got
similar debug log which i lised below.
I wasn't able to see any problem with ldap configuration because it works
with radtest command. (That is when i entered correct usrname but wrong
password, I got Access-Rejected message. When both of them was true, I got
Access-Accepted)
Is there a problem with my ldap configuration. Is there any weird message in
my debug log?
I am dealing with this thing about 20 days. Could anybody tell me whats
wrong with it?
Thanks in advance:
My full debug log: (username was entered true, password was entered false )
-------------------------------------------------------------------------------------------------
ldap:~ # radiusd -X -A
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/raddb/proxy.conf
Config: including file: /etc/raddb/clients.conf
Config: including file: /etc/raddb/snmp.conf
Config: including file: /etc/raddb/eap.conf
Config: including file: /etc/raddb/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/radius"
main: libdir = "/usr/lib/freeradius"
main: radacctdir = "/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: user = "radiusd"
main: group = "radiusd"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib/freeradius
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: authtype = "MS-CHAP"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded LDAP
ldap: server = "ldap.anadolu.edu.tr"
ldap: port = 389
ldap: net_timeout = 1
ldap: timeout = 4
ldap: timelimit = 3
ldap: identity = ""
ldap: tls_mode = no
ldap: start_tls = no
ldap: tls_cacertfile = "(null)"
ldap: tls_cacertdir = "(null)"
ldap: tls_certfile = "(null)"
ldap: tls_keyfile = "(null)"
ldap: tls_randfile = "(null)"
ldap: tls_require_cert = "allow"
ldap: password = ""
ldap: basedn = "ou=people,dc=anadolu,dc=edu,dc=tr"
ldap: filter = "(uid=%u)"
ldap: base_filter = "(objectclass=radiusprofile)"
ldap: default_profile = "(null)"
ldap: profile_attribute = "(null)"
ldap: password_header = "(null)"
ldap: password_attribute = "(null)"
ldap: access_attr = "(null)"
ldap: groupname_attribute = "cn"
ldap: groupmembership_filter =
"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
ldap: groupmembership_attribute = "(null)"
ldap: dictionary_mapping = "/etc/raddb/ldap.attrmap"
ldap: ldap_debug = 0
ldap: ldap_connections_number = 5
ldap: compare_check_items = no
ldap: access_attr_used_for_allow = yes
ldap: do_xlat = yes
ldap: edir_account_policy_check = yes
ldap: set_auth_type = yes
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Creating new attribute ldap_1x-Ldap-Group
rlm_ldap: Registering ldap_groupcmp for ldap_1x-Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap_1x
rlm_ldap: Over-riding set_auth_type, as we're not listed in the
"authenticate" section.
rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS
Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS
Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
conns: 0x800d0420
Module: Instantiated ldap (ldap_1x)
Module: Loaded eap
eap: default_eap_type = "ttls"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file = "/etc/raddb/certs/server_keycert.pem"
tls: certificate_file = "/etc/raddb/certs/server_keycert.pem"
tls: CA_file = "/etc/raddb/certs/cacert.pem"
tls: private_key_password = "1234"
tls: dh_file = "/etc/raddb/certs/dh"
tls: random_file = "/etc/raddb/certs/random"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = no
tls: check_cert_cn = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
rlm_eap: Loaded and initialized type tls
ttls: default_eap_type = "md5"
ttls: copy_request_to_tunnel = yes
ttls: use_tunneled_reply = no
rlm_eap: Loaded and initialized type ttls
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/raddb/huntgroups"
preprocess: hints = "/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = yes
realm: ignore_null = yes
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/etc/raddb/users"
files: acctusersfile = "/etc/raddb/acct_users"
files: preproxy_usersfile = "/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 10.10.7.203:1645, id=146,
length=139
User-Name = "tkiziloren"
Framed-MTU = 1400
Called-Station-Id = "0017.0e85.f190"
Calling-Station-Id = "0011.2fb9.d08b"
Service-Type = Login-User
Message-Authenticator = 0x4bf1be37ab5fc1598c68bd249777d10d
EAP-Message = 0x0202000f01746b697a696c6f72656e
NAS-Port-Type = Wireless-802.11
NAS-Port = 322
NAS-IP-Address = 10.10.7.203
NAS-Identifier = "testbaum"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "tkiziloren", skipping NULL due to
config.
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 2 length 15
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched entry DEFAULT at line 29
modcall[authorize]: module "files" returns ok for request 0
rlm_ldap: - authorize
rlm_ldap: performing user authorization for tkiziloren
radius_xlat: '(uid=tkiziloren)'
radius_xlat: 'ou=people,dc=anadolu,dc=edu,dc=tr'
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to ldap.anadolu.edu.tr:389, authentication 0
rlm_ldap: bind as / to ldap.anadolu.edu.tr:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in ou=people,dc=anadolu,dc=edu,dc=tr, with
filter (uid=tkiziloren)
rlm_ldap: looking for check items in directory...
rlm_ldap: looking for reply items in directory...
rlm_ldap: user tkiziloren authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
modcall[authorize]: module "ldap_1x" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 146 to 10.10.7.203 port 1645
EAP-Message = 0x010300061520
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x0aacb6009ffcc2e6b40b7487d9b49dce
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.10.7.203:1645, id=147,
length=202
User-Name = "tkiziloren"
Framed-MTU = 1400
Called-Station-Id = "0017.0e85.f190"
Calling-Station-Id = "0011.2fb9.d08b"
Service-Type = Login-User
Message-Authenticator = 0xec986e334fed0be253f43e2461d77e42
EAP-Message =
0x0203003c158000000032160301002d01000029030146cbafcad15f26ee9c399c30942cb9a40c438dfa3f0aeb13b9b68e7fd7fa6e64000002000a0100
NAS-Port-Type = Wireless-802.11
NAS-Port = 322
State = 0x0aacb6009ffcc2e6b40b7487d9b49dce
NAS-IP-Address = 10.10.7.203
NAS-Identifier = "testbaum"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "tkiziloren", skipping NULL due to
config.
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 3 length 60
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
users: Matched entry DEFAULT at line 29
modcall[authorize]: module "files" returns ok for request 1
rlm_ldap: - authorize
rlm_ldap: performing user authorization for tkiziloren
radius_xlat: '(uid=tkiziloren)'
radius_xlat: 'ou=people,dc=anadolu,dc=edu,dc=tr'
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=people,dc=anadolu,dc=edu,dc=tr, with
filter (uid=tkiziloren)
rlm_ldap: looking for check items in directory...
rlm_ldap: looking for reply items in directory...
rlm_ldap: user tkiziloren authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
modcall[authorize]: module "ldap_1x" returns ok for request 1
modcall: leaving group authorize (returns updated) for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: Request found, released from the list
rlm_eap: EAP/ttls
rlm_eap: processing type ttls
rlm_eap_ttls: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
rlm_eap_tls: <<< TLS 1.0 Handshake [length 002d], ClientHello
TLS_accept: SSLv3 read client hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
TLS_accept: SSLv3 write server hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 05e7], Certificate
TLS_accept: SSLv3 write certificate A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
TLS_accept: SSLv3 write server done A
TLS_accept: SSLv3 flush data
TLS_accept:error in SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
eaptls_process returned 13
modcall[authenticate]: module "eap" returns handled for request 1
modcall: leaving group authenticate (returns handled) for request 1
Sending Access-Challenge of id 147 to 10.10.7.203 port 1645
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0x3130303530373130333734345a30818f310b30090603
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x2c09c8f35ddc35ecd609188a17165621
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 10.10.7.203:1645, id=148,
length=148
User-Name = "tkiziloren"
Framed-MTU = 1400
Called-Station-Id = "0017.0e85.f190"
Calling-Station-Id = "0011.2fb9.d08b"
Service-Type = Login-User
Message-Authenticator = 0x9b4e281f16c2c5d3cf691e6e195bea68
EAP-Message = 0x020400061500
NAS-Port-Type = Wireless-802.11
NAS-Port = 322
State = 0x2c09c8f35ddc35ecd609188a17165621
NAS-IP-Address = 10.10.7.203
NAS-Identifier = "testbaum"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
modcall[authorize]: module "chap" returns noop for request 2
modcall[authorize]: module "mschap" returns noop for request 2
rlm_realm: No '@' in User-Name = "tkiziloren", skipping NULL due to
config.
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: EAP packet type response id 4 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 2
users: Matched entry DEFAULT at line 29
modcall[authorize]: module "files" returns ok for request 2
rlm_ldap: - authorize
rlm_ldap: performing user authorization for tkiziloren
radius_xlat: '(uid=tkiziloren)'
radius_xlat: 'ou=people,dc=anadolu,dc=edu,dc=tr'
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in ou=people,dc=anadolu,dc=edu,dc=tr, with
filter (uid=tkiziloren)
rlm_ldap: looking for check items in directory...
rlm_ldap: looking for reply items in directory...
rlm_ldap: user tkiziloren authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
modcall[authorize]: module "ldap_1x" returns ok for request 2
modcall: leaving group authorize (returns updated) for request 2
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
rlm_eap: Request found, released from the list
rlm_eap: EAP/ttls
rlm_eap: processing type ttls
rlm_eap_ttls: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
modcall[authenticate]: module "eap" returns handled for request 2
modcall: leaving group authenticate (returns handled) for request 2
Sending Access-Challenge of id 148 to 10.10.7.203 port 1645
EAP-Message =
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
EAP-Message =
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
EAP-Message =
0x4b77db5093871b2203bf2271cb97b98cc169c03f4f67d7a01261d971dfddc176cce3a42e1dd1e37037060a528db7e8481722e222549b882a93cfa582a29df0f1b401a28e197772410a1f1016030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xb63cf9e5375c651683e69b8c2d8543fc
Finished request 2
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 146 with timestamp 4642d682
Cleaning up request 1 ID 147 with timestamp 4642d682
Cleaning up request 2 ID 148 with timestamp 4642d682
Nothing to do. Sleeping until we see a request.
A.L.M.Buxey wrote:
>
> Hi,
>
>> However when i try to perform same task by using securew2 on XP client,
>> it
>> always shows "attempting to authenticate",
>
> did you configure SecureW2 to allow new connections?
>
> alan
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
>
--
View this message in context: http://www.nabble.com/ttls-problem-tf3717596.html#a10408620
Sent from the FreeRadius - User mailing list archive at Nabble.com.
More information about the Freeradius-Users
mailing list