1.1.6: PAP and MySQL-stored NT-Password don't work
tnt at kalik.co.yu
tnt at kalik.co.yu
Fri May 11 11:05:12 CEST 2007
Server setup (radiusd.conf) > pap: encryption_scheme = "crypt"
Password attribute > NT-Password
from radiusd.conf:
# PAP module to authenticate users based on their stored password
#
# As of 1.1.4, the "encryption_scheme" configuration should
# no longer be used. For backwards compatibility, it will still
# work as before, but we recommend that it is not used.
Ivan Kalik
Kalik Informatika ISP
Dana 11/5/2007, "Stefan Winter" <stefan.winter at restena.lu> piše:
>Hi,
>
>still no joy: I've set up a brand new virtual test machine, installed FR-1.16
>from pristine sources, and did only the minimum required changes to the
>config - diff of the whole raddb directory as is on the machine compared to
>the shipped config below:
>
>diff -r raddb-shipped/radiusd.conf raddb/radiusd.conf
>1859c1859
>< # sql
>---
>> sql
>diff -r raddb-shipped/sql.conf raddb/sql.conf
>23c23
>< password = "rootpass"
>---
>> password = "fixmeFR"
>diff -r raddb-shipped/users raddb/users
>153,154c153,154
>< DEFAULT Auth-Type = System
>< Fall-Through = 1
>---
>> #DEFAULT Auth-Type = System
>> # Fall-Through = 1
>
>That's pretty minimal.
>
>DB content on the test machine is
>
>mysql> select * from radcheck;
>+----+----------+-------------+----+----------------------------------+
>| id | UserName | Attribute | op | Value |
>+----+----------+-------------+----+----------------------------------+
>| 1 | swinter | NT-Password | := | 0CB6948805F797BF2A82807973B89537 |
>+----+----------+-------------+----+----------------------------------+
>1 row in set (0.00 sec)
>
>smbencrypt acknowledges that the value corresponds to the password "test".
>
>Still, with using
>
>./radtest swinter test localhost:1812 123 testing123
>
>debug output doesn't authenticate the user. Debug output at the end of the
>mail.
>
>Greetings,
>
>Stefan
>
>----- radiusd -X
>
># ./radiusd -X
>Starting - reading configuration files ...
>reread_config: reading radiusd.conf
>Config: including file: /etc/raddb/proxy.conf
>Config: including file: /etc/raddb/clients.conf
>Config: including file: /etc/raddb/snmp.conf
>Config: including file: /etc/raddb/eap.conf
>Config: including file: /etc/raddb/sql.conf
> main: prefix = "/usr/local/freeradius-1.1.6"
> main: localstatedir = "/usr/local/freeradius-1.1.6/var"
> main: logdir = "/usr/local/freeradius-1.1.6/var/log/radius"
> main: libdir = "/usr/local/freeradius-1.1.6/lib"
> main: radacctdir = "/usr/local/freeradius-1.1.6/var/log/radius/radacct"
> main: hostname_lookups = no
> main: max_request_time = 30
> main: cleanup_delay = 5
> main: max_requests = 1024
> main: delete_blocked_requests = 0
> main: port = 0
> main: allow_core_dumps = no
> main: log_stripped_names = no
> main: log_file = "/usr/local/freeradius-1.1.6/var/log/radius/radius.log"
> main: log_auth = no
> main: log_auth_badpass = no
> main: log_auth_goodpass = no
> main: pidfile = "/usr/local/freeradius-1.1.6/var/run/radiusd/radiusd.pid"
> main: user = "(null)"
> main: group = "(null)"
> main: usercollide = no
> main: lower_user = "no"
> main: lower_pass = "no"
> main: nospace_user = "no"
> main: nospace_pass = "no"
> main: checkrad = "/usr/local/freeradius-1.1.6/sbin/checkrad"
> main: proxy_requests = yes
> proxy: retry_delay = 5
> proxy: retry_count = 3
> proxy: synchronous = no
> proxy: default_fallback = yes
> proxy: dead_time = 120
> proxy: post_proxy_authorize = no
> proxy: wake_all_if_all_dead = no
> security: max_attributes = 200
> security: reject_delay = 1
> security: status_server = no
> main: debug_level = 0
>read_config_files: reading dictionary
>read_config_files: reading naslist
>Using deprecated naslist file. Support for this will go away soon.
>read_config_files: reading clients
>read_config_files: reading realms
>radiusd: entering modules setup
>Module: Library search path is /usr/local/freeradius-1.1.6/lib
>Module: Loaded exec
> exec: wait = yes
> exec: program = "(null)"
> exec: input_pairs = "request"
> exec: output_pairs = "(null)"
> exec: packet_type = "(null)"
>rlm_exec: Wait=yes but no output defined. Did you mean output=none?
>Module: Instantiated exec (exec)
>Module: Loaded expr
>Module: Instantiated expr (expr)
>Module: Loaded PAP
> pap: encryption_scheme = "crypt"
> pap: auto_header = yes
>Module: Instantiated pap (pap)
>Module: Loaded CHAP
>Module: Instantiated chap (chap)
>Module: Loaded MS-CHAP
> mschap: use_mppe = yes
> mschap: require_encryption = no
> mschap: require_strong = no
> mschap: with_ntdomain_hack = no
> mschap: passwd = "(null)"
> mschap: ntlm_auth = "(null)"
>Module: Instantiated mschap (mschap)
>Module: Loaded System
> unix: cache = no
> unix: passwd = "(null)"
> unix: shadow = "(null)"
> unix: group = "(null)"
> unix: radwtmp = "/usr/local/freeradius-1.1.6/var/log/radius/radwtmp"
> unix: usegroup = no
> unix: cache_reload = 600
>Module: Instantiated unix (unix)
>Module: Loaded eap
> eap: default_eap_type = "md5"
> eap: timer_expire = 60
> eap: ignore_unknown_eap_types = no
> eap: cisco_accounting_username_bug = no
>rlm_eap: Loaded and initialized type md5
>rlm_eap: Loaded and initialized type leap
> gtc: challenge = "Password: "
> gtc: auth_type = "PAP"
>rlm_eap: Loaded and initialized type gtc
> mschapv2: with_ntdomain_hack = no
>rlm_eap: Loaded and initialized type mschapv2
>Module: Instantiated eap (eap)
>Module: Loaded preprocess
> preprocess: huntgroups = "/etc/raddb/huntgroups"
> preprocess: hints = "/etc/raddb/hints"
> preprocess: with_ascend_hack = no
> preprocess: ascend_channels_per_line = 23
> preprocess: with_ntdomain_hack = no
> preprocess: with_specialix_jetstream_hack = no
> preprocess: with_cisco_vsa_hack = no
> preprocess: with_alvarion_vsa_hack = no
>Module: Instantiated preprocess (preprocess)
>Module: Loaded realm
> realm: format = "suffix"
> realm: delimiter = "@"
> realm: ignore_default = no
> realm: ignore_null = no
>Module: Instantiated realm (suffix)
>Module: Loaded files
> files: usersfile = "/etc/raddb/users"
> files: acctusersfile = "/etc/raddb/acct_users"
> files: preproxy_usersfile = "/etc/raddb/preproxy_users"
> files: compat = "no"
>Module: Instantiated files (files)
>Module: Loaded SQL
> sql: driver = "rlm_sql_mysql"
> sql: server = "localhost"
> sql: port = ""
> sql: login = "root"
> sql: password = "fixmeFR"
> sql: radius_db = "radius"
> sql: nas_table = "nas"
> sql: sqltrace = no
> sql: sqltracefile = "/usr/local/freeradius-1.1.6/var/log/radius/sqltrace.sql"
> sql: readclients = no
> sql: deletestalesessions = yes
> sql: num_sql_socks = 5
> sql: sql_user_name = "%{User-Name}"
> sql: default_user_profile = ""
> sql: query_on_not_found = no
> sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id"
> sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id"
> sql: authorize_group_check_query = "SELECT radgroupcheck.id,radgroupcheckGroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id"
> sql: authorize_group_reply_query = "SELECT radgroupreply.id,radgroupreplyGroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id"
> sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
> sql: accounting_update_query = "UPDATE radacct SET FramedIPAddress = '%{Framed-IP-Address}', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}'"
> sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0')"
> sql: accounting_start_query = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
> sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
> sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
> sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
> sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}'"
> sql: connect_failure_retry_delay = 60
> sql: simul_count_query = ""
> sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
> sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', NOW())"
> sql: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
>rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
>rlm_sql (sql): Attempting to connect to root at localhost:/radius
>rlm_sql (sql): starting 0
>rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
>rlm_sql_mysql: Starting connect to MySQL server for #0
>rlm_sql (sql): Connected new DB handle, #0
>rlm_sql (sql): starting 1
>rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
>rlm_sql_mysql: Starting connect to MySQL server for #1
>rlm_sql (sql): Connected new DB handle, #1
>rlm_sql (sql): starting 2
>rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
>rlm_sql_mysql: Starting connect to MySQL server for #2
>rlm_sql (sql): Connected new DB handle, #2
>rlm_sql (sql): starting 3
>rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
>rlm_sql_mysql: Starting connect to MySQL server for #3
>rlm_sql (sql): Connected new DB handle, #3
>rlm_sql (sql): starting 4
>rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
>rlm_sql_mysql: Starting connect to MySQL server for #4
>rlm_sql (sql): Connected new DB handle, #4
>Module: Instantiated sql (sql)
>Module: Loaded Acct-Unique-Session-Id
> acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
>Module: Instantiated acct_unique (acct_unique)
>Module: Loaded detail
> detail: detailfile = "/usr/local/freeradius-1.1.6/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
> detail: detailperm = 384
> detail: dirperm = 493
> detail: locking = no
>Module: Instantiated detail (detail)
>Module: Loaded radutmp
> radutmp: filename = "/usr/local/freeradius-1.1.6/var/log/radius/radutmp"
> radutmp: username = "%{User-Name}"
> radutmp: case_sensitive = yes
> radutmp: check_with_nas = yes
> radutmp: perm = 384
> radutmp: callerid = yes
>Module: Instantiated radutmp (radutmp)
>Listening on authentication *:1812
>Listening on accounting *:1813
>Ready to process requests.
>rad_recv: Access-Request packet from host 127.0.0.1:1024, id=209, length=59
> User-Name = "swinter"
> User-Password = "test"
> NAS-IP-Address = 255.255.255.255
> NAS-Port = 123
> Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 0
> modcall[authorize]: module "preprocess" returns ok for request 0
> modcall[authorize]: module "chap" returns noop for request 0
> modcall[authorize]: module "mschap" returns noop for request 0
> rlm_realm: No '@' in User-Name = "swinter", looking up realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 0
> rlm_eap: No EAP-Message, not doing EAP
> modcall[authorize]: module "eap" returns noop for request 0
> modcall[authorize]: module "files" returns notfound for request 0
>radius_xlat: 'swinter'
>rlm_sql (sql): sql_set_user escaped user --> 'swinter'
>radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'swinter' ORDER BY id'
>rlm_sql (sql): Reserving sql socket id: 4
>radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheckAttribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'swinter' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
>radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = 'swinter' ORDER BY id'
>radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreplyAttribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'swinter' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
>rlm_sql (sql): Released sql socket id: 4
> modcall[authorize]: module "sql" returns ok for request 0
>rlm_pap: Normalizing NT-Password from hex encoding
> modcall[authorize]: module "pap" returns updated for request 0
>modcall: leaving group authorize (returns updated) for request 0
> rad_check_password: Found Auth-Type pap
>auth: type "PAP"
> Processing the authenticate section of radiusd.conf
>modcall: entering group PAP for request 0
>rlm_pap: login attempt with password test
>rlm_pap: Using NT encryption.
>radius_xlat: Running registered xlat function of module mschap for string 'NT-Hash test'
> rlm_mschap: Unknown expansion string "NT-Hash test"
>radius_xlat: ''
>rlm_pap: mschap xlat failed
>rlm_pap: Passwords don't match
> modcall[authenticate]: module "pap" returns reject for request 0
>modcall: leaving group PAP (returns reject) for request 0
>auth: Failed to validate the user.
>Delaying request 0 for 1 seconds
>Finished request 0
>Going to the next request
>--- Walking the entire request list ---
>Waking up in 1 seconds...
>--- Walking the entire request list ---
>Waking up in 1 seconds...
>--- Walking the entire request list ---
>Sending Access-Reject of id 209 to 127.0.0.1 port 1024
>Waking up in 4 seconds...
>--- Walking the entire request list ---
>Cleaning up request 0 ID 209 with timestamp 464429d1
>Nothing to do. Sleeping until we see a request.
>
>
>--
>Stefan WINTER
>
>Stiftung RESTENA - RĂŠseau TĂŠlĂŠinformatique de l'Education Nationale et de
>la Recherche
>Ingenieur Forschung & Entwicklung
>
>6, rue Richard Coudenhove-Kalergi
>L-1359 Luxembourg
>E-Mail: stefan.winter at restena.lu   Tel.:   +352 424409-1
>http://www.restena.lu        Fax:    +352 422473
>
>
More information about the Freeradius-Users
mailing list