no session showed by radwho, but user still could not login
tnt at kalik.co.yu
tnt at kalik.co.yu
Wed May 16 10:37:54 CEST 2007
Config looks OK. Change type of the NAS you are testing to "other". If
that stops multiple logins, problem is with radcheck script.
Ivan Kalik
Kalik Informatika ISP
Dana 16/5/2007, "Trio" <trioy99 at gmail.com> piše:
>Im using nas with 'nas' table in my sql here the data
>mysql> select * from nas;
>+----+----------------+--------------+----------+-------+-----------+-------
>----+---------------+
>| id | nasname | shortname | type | ports | secret |
>community | description |
>+----+----------------+--------------+----------+-------+-----------+-------
>----+---------------+
>| 1 | 129.47.26.224 | ap-cisco | cisco | 1812 | aironet03 |
>| RADIUS Client |
>| 2 | 129.47.26.111 | mikrotik | mikrotik | 1812 | free |
>| RADIUS Client |
>| 6 | 202.152.57.137 | mikrotik | mikrotik | 1812 | free | NULL
>| RADIUS Client |
>| 5 | 129.47.26.123 | kelapa-sawit | mikrotik | 1812 | utama | NULL
>| RADIUS Client |
>| 7 | 129.47.26.222 | linksys | linksys | 1812 | linksys | NULL
>| RADIUS Client |
>| 8 | 127.0.0.1 | localhost | other | 1812 | chilli | NULL
>| RADIUS Client |
>| 9 | 202.152.4.220 | utama | mikrotik | 1812 | utama | NULL
>| RADIUS Client |
>| 10 | 129.47.26.122 | apbaru | mikrotik | 1812 | free | NULL
>| RADIUS Client |
>+----+----------------+--------------+----------+-------+-----------+-------
>----+---------------+
>
>And this is my session section in my radiusd.conf
>session {
> radutmp
>
> #
> # See "Simultaneous Use Checking Querie" in sql.conf
> sql
>}
>
>Whats wrong with that my conf ?
>
>
>Trio
>
>-----Original Message-----
>From: freeradius-users-bounces+trioy99=gmail.com at lists.freeradius.org
>[mailto:freeradius-users-bounces+trioy99=gmail.com at lists.freeradius.org] On
>Behalf Of tnt at kalik.co.yu
>Sent: Wednesday, May 16, 2007 3:02 AM
>To: FreeRadius users mailing list
>Subject: RE: no session showed by radwho, but user still could not login
>
>Yes. You haven't set up session control properly. Check the nastype
>entry in clents.conf and make sure that sql is not commented out in
>session {} part of radiusd.conf.
>
>Ivan Kalik
>Kalik Informatika ISP
>
>
>Dana 15/5/2007, "Trio" <trioy99 at gmail.com> piše:
>
>>I change the sql now
>>This is my sql now..
>>mysql> select * from radcheck where username='rsa at idola';
>>+----+-----------+------------------+----+----------+
>>| id | UserName | Attribute | op | Value |
>>+----+-----------+------------------+----+----------+
>>| 57 | rsa at idola | Simultaneous-Use | := | 1 |
>>| 42 | rsa at idola | Password | == | denpasar |
>>+----+-----------+------------------+----+----------+
>>But I try with 2 pc, both using username rsa at idola, guess what happen?
>>All pc can connect perfectly :(
>>1 username can used by 2 pc in the same time.....
>>
>>Any one can explain this ?
>>thanks
>>trio
>>-----Original Message-----
>>From: freeradius-users-bounces+trioy99=gmail.com at lists.freeradius.org
>>[mailto:freeradius-users-bounces+trioy99=gmail.com at lists.freeradius.org] On
>>Behalf Of Dennis Skinner
>>Sent: Tuesday, May 15, 2007 8:51 PM
>>To: FreeRadius users mailing list
>>Subject: Re: no session showed by radwho, but user still could not login
>>
>>Trio wrote:
>>> :)
>>> Please read my 1st email,there is a words
>>> "I want only 1 session for every user"
>>
>>It is not a boolean option. 0 means you want 0 sessions for every user
>>(i.e. they cannot login). 1 means 1 session, 2 means 2 sessions, etc...
>>
>>--
>>Dennis Skinner
>>Systems Administrator
>>BlueFrog Internet
>>http://www.bluefrog.com
>>-
>>List info/subscribe/unsubscribe? See
>>http://www.freeradius.org/list/users.html
>>
>>-
>>List info/subscribe/unsubscribe? See
>http://www.freeradius.org/list/users.html
>>
>>
>
>-
>List info/subscribe/unsubscribe? See
>http://www.freeradius.org/list/users.html
>
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>
More information about the Freeradius-Users
mailing list