problem in autehtication with EAP-MD5
shantanu choudhary
shantanu_843 at yahoo.co.in
Wed May 30 10:23:21 CEST 2007
hi all,
i am trying to get autheticated by radius server using EAP-MD5 but i always get FAILURE and i m not able to figure out the problem, can anyone help me out!!!!!
my client side shows out put like this:-
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL - hexdump(len=17): 01 00 00 0d 02 00 00 0d 01 74 65 73 74 75 73 65 72
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:03:7f:09:60:a0
RX EAPOL - hexdump(len=26): 01 00 00 16 01 01 00 16 04 10 e5 b2 63 cb 4e 4f e7 d1 b1 4f 30 95 6c 21 cd a9
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=1 method=4 vendor=0 vendorMethod=0
EAP: EAP entering state GET_METHOD
EAP: Initialize selected EAP method: vendor 0 method 4 (MD5)
CTRL-EVENT-EAP-METHOD EAP vendor 0 method 4 (MD5) selected
CTRL_IFACE monitor send - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 31 36 32 37 35 2d 31 00
EAP: EAP entering state METHOD
EAP-MD5: Challenge - hexdump(len=16): e5 b2 63 cb 4e 4f e7 d1 b1 4f 30 95 6c 21 cd a9
EAP-MD5: Generating Challenge Response
EAP-MD5: Response - hexdump(len=16): 4a f8 0b fc 31 7e 27 47 ac 95 4c 77 56 30 bf c6
EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL - hexdump(len=26): 01 00 00 16 02 01 00 16 04 10 4a f8 0b fc 31 7e 27 47 ac 95 4c 77 56 30 bf c6
EAPOL: SUPP_BE entering state RECEIVE
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=6):
53 54 41 54 55 53 STATUS
ioctl[SIOCGIFADDR]: Cannot assign requested address
RX ctrl_iface - hexdump_ascii(len=13):
4c 49 53 54 5f 4e 45 54 57 4f 52 4b 53 LIST_NETWORKS
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX EAPOL from 00:03:7f:09:60:a0
RX EAPOL - hexdump(len=8): 01 00 00 04 04 01 00 04
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Failure
EAP: EAP entering state DISCARD
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RECEIVE
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
EAPOL: startWhen --> 0
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=6):
53 54 41 54 55 53 STATUS
ioctl[SIOCGIFADDR]: Cannot assign requested address
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=6):
53 54 41 54 55 53 STATUS
ioctl[SIOCGIFADDR]: Cannot assign requested address
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=6):
53 54 41 54 55 53 STATUS
ioctl[SIOCGIFADDR]: Cannot assign requested address
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
EAPOL: authWhile --> 0
EAPOL: SUPP_BE entering state TIMEOUT
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
RX EAPOL from 00:03:7f:09:60:a0
RX EAPOL - hexdump(len=9): 01 00 00 05 01 02 00 05 01
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: deinitialize previously used EAP method (4, MD5) at INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=2 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP authentication started
CTRL_IFACE monitor send - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 31 36 32 37 35 2d 31 00
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: using real identity - hexdump_ascii(len=8):
74 65 73 74 75 73 65 72 testuser
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL - hexdump(len=17): 01 00 00 0d 02 02 00 0d 01 74 65 73 74 75 73 65 72
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:03:7f:09:60:a0
RX EAPOL - hexdump(len=26): 01 00 00 16 01 03 00 16 04 10 62 2a 69 09 f7 63 b3 30 cf 0b bd 05 83 73 4f 4f
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=3 method=4 vendor=0 vendorMethod=0
EAP: EAP entering state GET_METHOD
EAP: Initialize selected EAP method: vendor 0 method 4 (MD5)
CTRL-EVENT-EAP-METHOD EAP vendor 0 method 4 (MD5) selected
CTRL_IFACE monitor send - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 31 36 32 37 35 2d 31 00
EAP: EAP entering state METHOD
EAP-MD5: Challenge - hexdump(len=16): 62 2a 69 09 f7 63 b3 30 cf 0b bd 05 83 73 4f 4f
EAP-MD5: Generating Challenge Response
EAP-MD5: Response - hexdump(len=16): bd c1 d1 e3 be 9e 4c 46 7d d1 c0 a3 72 11 b0 ff
EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL - hexdump(len=26): 01 00 00 16 02 03 00 16 04 10 bd c1 d1 e3 be 9e 4c 46 7d d1 c0 a3 72 11 b0 ff
EAPOL: SUPP_BE entering state RECEIVE
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=6):
53 54 41 54 55 53 STATUS
ioctl[SIOCGIFADDR]: Cannot assign requested address
RX ctrl_iface - hexdump_ascii(len=13):
4c 49 53 54 5f 4e 45 54 57 4f 52 4b 53 LIST_NETWORKS
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
EAPOL: startWhen --> 0
RX EAPOL from 00:03:7f:09:60:a0
RX EAPOL - hexdump(len=8): 01 00 00 04 04 03 00 04
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Failure
EAP: EAP entering state DISCARD
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RECEIVE
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=6):
53 54 41 54 55 53 STATUS
ioctl[SIOCGIFADDR]: Cannot assign requested address
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=6):
53 54 41 54 55 53 STATUS
ioctl[SIOCGIFADDR]: Cannot assign requested address
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
CTRL_IFACE monitor detached - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 31 36 32 37 35 2d 31 00
EAPOL: authWhile --> 0
EAPOL: SUPP_BE entering state TIMEOUT
>> i dont know what is this cannot assign requested address,(i am not requesting for any address!!!)
my supplicant file is like this:-
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
eapol_version=1
ap_scan=1
fast_reauth=1
network={
ssid="ATH182"
scan_ssid=1
key_mgmt=WPA-EAP
eap=MD5
identity="testuser"
password="whatever"
}
>>and correspondingly server side shows message like this:-
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /usr/local/etc/raddb/proxy.conf
Config: including file: /usr/local/etc/raddb/clients.conf
Config: including file: /usr/local/etc/raddb/snmp.conf
Config: including file: /usr/local/etc/raddb/eap.conf
Config: including file: /usr/local/etc/raddb/sql.conf
main: prefix = "/usr/local"
main: localstatedir = "/usr/local/var"
main: logdir = "/usr/local/var/log/radius"
main: libdir = "/usr/local/lib"
main: radacctdir = "/usr/local/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/usr/local/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
pap: auto_header = yes
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
tls: rsa_key_exchange = no
tls: dh_key_exchange = yes
tls: rsa_key_length = 512
tls: dh_key_length = 512
tls: verify_depth = 0
tls: CA_path = "(null)"
tls: pem_file_type = yes
tls: private_key_file = "/usr/local/etc/raddb/certs/cert-srv.pem"
tls: certificate_file = "/usr/local/etc/raddb/certs/cert-srv.pem"
tls: CA_file = "/usr/local/etc/raddb/certs/root.pem"
tls: private_key_password = "whatever"
tls: dh_file = "/usr/local/etc/raddb/certs/dh"
tls: random_file = "/usr/local/etc/raddb/certs/random"
tls: fragment_size = 1024
tls: include_length = yes
tls: check_crl = no
tls: check_cert_cn = "(null)"
tls: cipher_list = "(null)"
tls: check_cert_issuer = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
rlm_eap: Loaded and initialized type tls
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
preprocess: hints = "/usr/local/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/usr/local/etc/raddb/users"
files: acctusersfile = "/usr/local/etc/raddb/acct_users"
files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/usr/local/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.2.183:1079, id=0, length=177
Message-Authenticator = 0x48563b978d926b5c042592ec5eae4537
Service-Type = Framed-User
User-Name = "testuser"
Framed-MTU = 1488
Called-Station-Id = "00-03-7F-09-60-7E:ATH183"
Calling-Station-Id = "00-03-7F-05-C0-9C"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x0200000d017465737475736572
NAS-IP-Address = 192.168.2.183
NAS-Port = 2
NAS-Port-Id = "STA port # 2"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 0 length 13
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched entry DEFAULT at line 153
users: Matched entry DEFAULT at line 172
users: Matched entry testuser at line 216
modcall[authorize]: module "files" returns ok for request 0
rlm_pap: Found existing Auth-Type, not changing it.
modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns updated) for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group authenticate (returns handled) for request 0
Sending Access-Challenge of id 0 to 192.168.2.183 port 1079
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message = 0x010100160410457803a5fc7f8de5ad1e9065c4fec0b0
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x0eb6726b77f05929d54be6c45de1f52f
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 0 with timestamp 465abecc
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 192.168.2.183:1079, id=1, length=204
Message-Authenticator = 0xfbcd80decacba158727083a6ca513fac
Service-Type = Framed-User
User-Name = "testuser"
Framed-MTU = 1488
State = 0x0eb6726b77f05929d54be6c45de1f52f
Called-Station-Id = "00-03-7F-09-60-7E:ATH183"
Calling-Station-Id = "00-03-7F-05-C0-9C"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020100160410b6cac9199b585c8705d9230d18b93094
NAS-IP-Address = 192.168.2.183
NAS-Port = 2
NAS-Port-Id = "STA port # 2"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 1 length 22
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
users: Matched entry DEFAULT at line 153
users: Matched entry DEFAULT at line 172
users: Matched entry testuser at line 216
modcall[authorize]: module "files" returns ok for request 1
rlm_pap: Found existing Auth-Type, not changing it.
modcall[authorize]: module "pap" returns noop for request 1
modcall: leaving group authorize (returns updated) for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: Request found, released from the list
rlm_eap: EAP/md5
rlm_eap: processing type md5
rlm_eap: Freeing handler
modcall[authenticate]: module "eap" returns ok for request 1
modcall: leaving group authenticate (returns ok) for request 1
Sending Access-Accept of id 1 to 192.168.2.183 port 1079
Framed-IP-Address = 255.255.255.254
Framed-MTU = 576
Service-Type = Framed-User
EAP-Message = 0x03010004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = "testuser"
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 1 ID 1 with timestamp 465abee0
Nothing to do. Sleeping until we see a request.
>>
can any one help me out it is really important and urgent.
if u need i will also tell u my radius.conf, eap.conf and users file!!
thank you
regards
shantanu
---------------------------------
Download prohibited? No problem! CHAT from any browser, without download.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20070530/32517eff/attachment.html>
More information about the Freeradius-Users
mailing list