freeradius auto-vlan 3com switch 4500G

[tnt at kalik.co.yu]

VLAN 2u not 2 has been assigned. Check node entry.

Ivan Kalik
Kalik Informatika ISP

Dana 9/11/2007, "Philippe Breton" <pbreton at wustl.edu> piše:

>HI,
>
>Has anyone successfully implemented auto-vlan with 3Com switch 4500G?
>
>I am using the following tunneling attributes:
>
>ATTRIBUTE    Tunnel-Type               64    integer    has_tag
>ATTRIBUTE    Tunnel-Medium-Type        65    integer    has_tag
>ATTRIBUTE    Tunnel-Private-Group-Id   81    string    has_tag
>VALUE        Tunnel-Type               VLAN    13
>VALUE        Tunnel-Medium-Type        TMT802        6
>
>The node is declared as followed:
>
>##IT Dell Inspiron 4000 laptop -- DHCP
>00-09-5b-61-52-0d  Auth-Type := Local, User-Password == "00-09-5b-61-52-0d"
>                   Tunnel-Medium-Type = TMT802,
>                   Tunnel-Private-Group-id = 2,
>                   Tunnel-Type = VLAN,
>
>Although my radius access request shows that the access has been granted
>and the VLAN 2 assigned, the switch 4500G does not open its port on VLAN 2.
>
>I changed the tunnel-medium-type between TMT802 and 802, but that did
>not change anything.
>
>I am currently doing auto-vlan with 3com 4400 with the same
>configuration and it is working like a charm. Any idea why the switch
>does automatically adjust?
>
>Any beginning of information is welcome.
>
>Thanks,
>
>Philippe
>
>
>_RADIUS ACCESS_REQUEST LOG_
>rad_recv: Access-Request packet from host 172.20.181.201:1024, id=41,
>length=126
>        User-Name = "00-09-5b-61-52-0d"
>        User-Password = "00-09-5b-61-52-0d"
>        NAS-IP-Address = 172.20.181.201
>        NAS-Identifier = "4500G"
>        NAS-Port = 16809985
>        NAS-Port-Type = Ethernet
>        Service-Type = Framed-User
>        Framed-Protocol = PPP
>        Calling-Station-Id = "0009-5b61-520d"
>  Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 0
>  modcall[authorize]: module "preprocess" returns ok for request 0
>  modcall[authorize]: module "chap" returns noop for request 0
>  modcall[authorize]: module "mschap" returns noop for request 0
>    rlm_realm: No '@' in User-Name = "00-09-5b-61-52-0d", looking up
>realm NULL
>    rlm_realm: No such realm "NULL"
>  modcall[authorize]: module "suffix" returns noop for request 0
>  rlm_eap: No EAP-Message, not doing EAP
>  modcall[authorize]: module "eap" returns noop for request 0
>    users: Matched entry 00-09-5b-61-52-0d at line 2
>  modcall[authorize]: module "files" returns ok for request 0
>modcall: leaving group authorize (returns ok) for request 0
>  rad_check_password:  Found Auth-Type Local
>auth: type Local
>auth: user supplied User-Password matches local User-Password
>Login OK: [00-09-5b-61-52-0d] (from client switch201 port 16809985 cli
>0009-5b61-520d)
>Sending Access-Accept of id 41 to 172.20.181.201 port 1024
>        Tunnel-Medium-Type:0 = TMT802
>        Tunnel-Private-Group-Id:0 = "2u"
>        Tunnel-Type:0 = VLAN
>Finished request 0
>
>
>