EAP and realm question.
tnt at kalik.co.yu
tnt at kalik.co.yu
Sun Sep 16 21:40:06 CEST 2007
Realm - since you are not using realms it is as expected. You can forget
about that one.
EAP - yes, your AP doesn't have EAP (802.1x) enabled.
Ivan Kalik
Kalik Informatika ISP
Dana 16/9/2007, "Piero Giobbi" <piero at news.fb.se> piše:
>Hi again all, sorry for spamming the list.
>
>I have two questions regarding EAP an REALM, realm first.
>
>In every request i get:
> rlm_realm: No '@' in User-Name = "00-17-f2-ea-b1-3e", looking up
>realm NULL
> rlm_realm: No such realm "NULL"
>
>I wonder what that mean if/how to turn that off? Or should i even care?
>
>EAP:
>I'm trying to get EAP working with my Proxim AP4000. When i auth. i
>get (Everything works great thou, but i want the "secure line"
>between NAS and server (If i got it right? I don't like clear text.)):
>
>rad_recv: Access-Request packet from host 10.0.5.200:6001, id=4,
>length=151
> User-Name = "00-17-f2-ea-b1-3e"
> User-Password = "00-17-f2-ea-b1-3e"
> NAS-IP-Address = 10.0.5.200
> Called-Station-Id = "00-20-a6-6f-93-bf:My Wireless Network B"
> Calling-Station-Id = "00-17-f2-ea-b1-3e"
> NAS-Port = 9
> NAS-Port-Type = Wireless-802.11
> Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 0
> modcall[authorize]: module "preprocess" returns ok for request 0
> modcall[authorize]: module "chap" returns noop for request 0
> modcall[authorize]: module "mschap" returns noop for request 0
> rlm_realm: No '@' in User-Name = "00-17-f2-ea-b1-3e", looking up
>realm NULL
> rlm_realm: No such realm "NULL"
> modcall[authorize]: module "suffix" returns noop for request 0
> rlm_eap: No EAP-Message, not doing EAP
> modcall[authorize]: module "eap" returns noop for request 0
> users: Matched entry 00-17-f2-ea-b1-3e at line 96
> modcall[authorize]: module "files" returns ok for request 0
> modcall[authorize]: module "pap" returns updated for request 0
>modcall: leaving group authorize (returns updated) for request 0
> rad_check_password: Found Auth-Type pap
>auth: type "PAP"
> Processing the authenticate section of radiusd.conf
>modcall: entering group PAP for request 0
>rlm_pap: login attempt with password 00-17-f2-ea-b1-3e
>rlm_pap: Using clear text password "00-17-f2-ea-b1-3e".
>rlm_pap: User authenticated successfully
> modcall[authenticate]: module "pap" returns ok for request 0
>modcall: leaving group PAP (returns ok) for request 0
>Sending Access-Accept of id 4 to 10.0.5.200 port 6001
> Calling-Station-Id == "00-17-f2-ea-b1-3e"
> NAS-IP-Address = 82.182.120.201
> Called-Station-Id = "00-20-a6-6f-93-bf:My Wireless Network B"
> NAS-Port = 9
> NAS-Port-Type = Wireless-802.11
> Service-Type = Framed-User
> Framed-Routing = Broadcast-Listen
>Finished request 0
>Going to the next request
>--- Walking the entire request list ---
>Waking up in 6 seconds..
>
>Does that mean that AP4000 doesn't sends a EAP-request or is my
>config somehow broken? Is there any way to tell? I Tried make my own
>cerificates with CA.all in the script folder, but i got stuck on one
>place:
>
>error while loading serial number
>
>I read somewhere that i could put a file in demoCA-folder with
>numbers in but that doesn't work, the file serial "disappears" and
>the same error comes up. Anyone solved this?
>
>Error-message:
>+ openssl ca -policy policy_anything -out newcert.pem -passin
>pass:whatever -key whatever -extensions xpserver_ext -extfile
>xpextensions -infiles newreq.pem
>Using configuration from /usr/local/ssl/openssl.cnf
>../demoCA/serial: No such file or directory
>error while loading serial number
>31237:error:02001002:system library:fopen:No such file or
>directory:bss_file.c:352:fopen('./demoCA/serial','r')
>31237:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:354:
>+ openssl pkcs12 -export -in newcert.pem -inkey newreq.pem -out cert-
>srv.p12 -clcerts -passin pass:whatever -passout pass:whatever
>No certificate matches private key
>+ openssl pkcs12 -in cert-srv.p12 -out cert-srv.pem -passin
>pass:whatever -passout pass:whatever
>31239:error:0D07207B:asn1 encoding routines:ASN1_get_object:header
>too long:asn1_lib.c:150:
>+ openssl x509 -inform PEM -outform DER -in cert-srv.pem -out cert-
>srv.der
>unable to load certificate
>31240:error:0906D06C:PEM routines:PEM_read_bio:no start
>line:pem_lib.c:647:Expecting: TRUSTED CERTIFICATE
>+ echo -e '\n\t\t##################\n'
>
>
>Again; Many thx for all help!
>
>p
>
>
>Startup info (Yes, i know the EAP WARNINGS but i can't even get an
>eap-message/error):
>debian:~# /usr/sbin/radiusd -v
>radiusd: FreeRADIUS Version 1.1.7, for host powerpc-unknown-linux-
>gnu, built on Sep 15 2007 at 09:59:30
>Copyright (C) 2000-2007 The FreeRADIUS server project.
>There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>PARTICULAR PURPOSE.
>You may redistribute copies of FreeRADIUS under the terms of the
>GNU General Public License.
>For more information about these matters, see the file named COPYRIGHT.
>debian:~# /usr/sbin/radiusd -X -f -d /etc/raddb/
>Starting - reading configuration files ...
>reread_config: reading radiusd.conf
>Config: including file: /etc/raddb/proxy.conf
>Config: including file: /etc/raddb/clients.conf
>Config: including file: /etc/raddb/snmp.conf
>Config: including file: /etc/raddb/eap.conf
>Config: including file: /etc/raddb/sql.conf
> main: prefix = "/usr"
> main: localstatedir = "/var"
> main: logdir = "/var/log/radius"
> main: libdir = "/usr/lib"
> main: radacctdir = "/var/log/radius/radacct"
> main: hostname_lookups = no
> main: max_request_time = 30
> main: cleanup_delay = 5
> main: max_requests = 1024
> main: delete_blocked_requests = 0
> main: port = 0
> main: allow_core_dumps = no
> main: log_stripped_names = no
> main: log_file = "/var/log/radius/radius.log"
> main: log_auth = no
> main: log_auth_badpass = no
> main: log_auth_goodpass = no
> main: pidfile = "/var/run/radiusd/radiusd.pid"
> main: user = "(null)"
> main: group = "(null)"
> main: usercollide = no
> main: lower_user = "no"
> main: lower_pass = "no"
> main: nospace_user = "no"
> main: nospace_pass = "no"
> main: checkrad = "/usr/checkrad"
> main: proxy_requests = yes
> proxy: retry_delay = 5
> proxy: retry_count = 3
> proxy: synchronous = no
> proxy: default_fallback = yes
> proxy: dead_time = 120
> proxy: post_proxy_authorize = no
> proxy: wake_all_if_all_dead = no
> security: max_attributes = 200
> security: reject_delay = 1
> security: status_server = no
> main: debug_level = 0
>read_config_files: reading dictionary
>read_config_files: reading naslist
>Using deprecated naslist file. Support for this will go away soon.
>read_config_files: reading clients
>read_config_files: reading realms
>radiusd: entering modules setup
>Module: Library search path is /usr/lib
>Module: Loaded exec
> exec: wait = yes
> exec: program = "(null)"
> exec: input_pairs = "request"
> exec: output_pairs = "(null)"
> exec: packet_type = "(null)"
>rlm_exec: Wait=yes but no output defined. Did you mean output=none?
>Module: Instantiated exec (exec)
>Module: Loaded expr
>Module: Instantiated expr (expr)
>Module: Loaded PAP
> pap: encryption_scheme = "crypt"
> pap: auto_header = yes
>Module: Instantiated pap (pap)
>Module: Loaded CHAP
>Module: Instantiated chap (chap)
>Module: Loaded MS-CHAP
> mschap: use_mppe = yes
> mschap: require_encryption = no
> mschap: require_strong = no
> mschap: with_ntdomain_hack = no
> mschap: passwd = "(null)"
> mschap: ntlm_auth = "(null)"
>Module: Instantiated mschap (mschap)
>Module: Loaded System
> unix: cache = no
> unix: passwd = "(null)"
> unix: shadow = "(null)"
> unix: group = "(null)"
> unix: radwtmp = "/var/log/radius/radwtmp"
> unix: usegroup = no
> unix: cache_reload = 600
>Module: Instantiated unix (unix)
>Module: Loaded eap
> eap: default_eap_type = "md5"
> eap: timer_expire = 60
> eap: ignore_unknown_eap_types = no
> eap: cisco_accounting_username_bug = no
>rlm_eap: Loaded and initialized type md5
>rlm_eap: Loaded and initialized type leap
> gtc: challenge = "Password: "
> gtc: auth_type = "PAP"
>rlm_eap: Loaded and initialized type gtc
> tls: rsa_key_exchange = no
> tls: dh_key_exchange = yes
> tls: rsa_key_length = 512
> tls: dh_key_length = 512
> tls: verify_depth = 0
> tls: CA_path = "(null)"
> tls: pem_file_type = yes
> tls: private_key_file = "/etc/raddb/certs/cert-srv.pem"
> tls: certificate_file = "/etc/raddb/certs/cert-srv.pem"
> tls: CA_file = "/etc/raddb/certs/demoCA/cacert.pem"
> tls: private_key_password = "whatever"
> tls: dh_file = "/etc/raddb/certs/dh"
> tls: random_file = "/etc/raddb/certs/random"
> tls: fragment_size = 1024
> tls: include_length = yes
> tls: check_crl = no
> tls: check_cert_cn = "(null)"
> tls: cipher_list = "(null)"
> tls: check_cert_issuer = "(null)"
>rlm_eap_tls: Loading the certificate file as a chain
>WARNING: rlm_eap_tls: Unable to set DH parameters. DH cipher suites
>may not work!
>WARNING: Fix this by running the OpenSSL command listed in eap.conf
>rlm_eap: Loaded and initialized type tls
> mschapv2: with_ntdomain_hack = no
>rlm_eap: Loaded and initialized type mschapv2
>Module: Instantiated eap (eap)
>Module: Loaded preprocess
> preprocess: huntgroups = "/etc/raddb/huntgroups"
> preprocess: hints = "/etc/raddb/hints"
> preprocess: with_ascend_hack = no
> preprocess: ascend_channels_per_line = 23
> preprocess: with_ntdomain_hack = no
> preprocess: with_specialix_jetstream_hack = no
> preprocess: with_cisco_vsa_hack = no
> preprocess: with_alvarion_vsa_hack = no
>Module: Instantiated preprocess (preprocess)
>Module: Loaded realm
> realm: format = "suffix"
> realm: delimiter = "@"
> realm: ignore_default = no
> realm: ignore_null = no
>Module: Instantiated realm (suffix)
>Module: Loaded files
> files: usersfile = "/etc/raddb/users"
> files: acctusersfile = "/etc/raddb/acct_users"
> files: preproxy_usersfile = "/etc/raddb/preproxy_users"
> files: compat = "no"
>Module: Instantiated files (files)
>Module: Loaded Acct-Unique-Session-Id
> acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
>Client-IP-Address, NAS-Port"
>Module: Instantiated acct_unique (acct_unique)
>Module: Loaded detail
> detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/
>detail-%Y%m%d"
> detail: detailperm = 384
> detail: dirperm = 493
> detail: locking = no
>Module: Instantiated detail (detail)
>Module: Loaded radutmp
> radutmp: filename = "/var/log/radius/radutmp"
> radutmp: username = "%{User-Name}"
> radutmp: case_sensitive = yes
> radutmp: check_with_nas = yes
> radutmp: perm = 384
> radutmp: callerid = yes
>Module: Instantiated radutmp (radutmp)
>Listening on authentication *:1812
>Listening on accounting *:1813
>Listening on proxy 127.0.0.1:1814
>
>
>
>
More information about the Freeradius-Users
mailing list