rlm_sqlippool

[rsg]

Doesn't acct_unique come after ?

When the server sees a Access-request  without NAS-Port, it simply
gives the result I indicated in my previous mail.

Then comes a problem of clearing the IP address when Accounting-Stop
message is received..

I tried changing acct_unique by replacing NAS-Port by
Calling-Station-Id without any success.




2008/4/22 Ivan Kalik <tnt at kalik.net>:
> Have a look at acct_unique in radiusd.conf and adjust accordingly.
>
>  Ivan Kalik
>  Kalik Informatika ISP
>
>
>  Dana 22/4/2008, "rsg" <ranil.santhish at gmail.com> piše:
>
>
>
>  >When there's no NAS-Port in rad_request... the server doesn't assign
>  >an IP address; That's why in my opinion there's no Framed-IP-Address
>  >in Access-Accept message.
>  >
>  >If my reasoning is correct, I'd like to highlight that NAS-Port is not
>  >a mandatory attribute when it comes to Mobile telephony environment.
>  >
>  >Is there any workaround once again to bypass this. I can suggest
>  >one..i.e to update the Access-Request using unlang and hope it would
>  >work.
>  >
>  >
>  >auth: type Local
>  >auth: user supplied User-Password matches local User-Password
>  >Login OK: [test/test] (from client SSS port 0 cli 44444444488)
>  >+- entering group post-auth
>  >rlm_sqlippool: unknown NAS-Port
>  >++[sqlippool] returns noop
>  >} # server example
>  >Sending Access-Accept of id 56 to 192.168.1.4 port 1812
>  >        Primary-DNS-Server = 192.168.2.2
>  >        Secondary-DNS-Server = 192.168.2.2
>  >        Proxy-State = 0x30303338
>  >Finished request 0.
>  >-
>  >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>  >
>  >
>
>  -
>  List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>