Accounting

[Ivan Kalik]

20 would mean 20 seconds not 20 minutes. Does the interim attribute
appear in the Access-Accept packet?

You can set up interim accounting by passing that radius attribute or it
can be fixed in the NAS configuration.

Ivan Kalik
Kalik Informatika ISP


Dana 12/8/2008, "Jonathan Gazeley" <jonathan.gazeley at bristol.ac.uk>
piše:

>Phil Mayers wrote:
>> Your NAS needs to support interim accounting.
>>
>> If it does already, it might be as simple as adding:
>>
>> DEFAULT
>>     Acct-Interim-Interval = 1800,
>>     Fall-Through = yes
>>
>> ...to the "users" file; modify as appropriate of course for your config.
>
>I have added the lines above to my "users" file, replacing 1800 with a
>value of 20. However, the updates do not occur every 20 minutes. Do I
>also need to enable something on my NAS (Cisco WiSMs) to allow it to
>provide accounting on demand?
>
>I did also try to edit the config on my WiSMs to push the accounting
>every 20 minutes but was unable to get that to work. The guy who
>primarily looks after the WiSMs is away at the moment.
>
>How is interim accounting normally done? I don't mind if the accounting
>is pushed or pulled, whatever works.
>
>Thanks,
>Jonathan
>
>----------------------------
>Jonathan Gazeley
>Systems Support Specialist
>ResNet | Wireless & VPN Team
>Information Services
>University of Bristol
>----------------------------
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>