Make error - Solved (not yet)
Ted Lum
freeradius.org at tedworld.com
Mon Dec 1 21:52:34 CET 2008
Ok, now you've opened another can of worms...
First, run "rpm -qlp freeradius-server-2.1.1-0.i386.rpm" and see if the
missing files are listed as actually being in the package. Their either
not in there, or in there but not being deployed. It would be helpful to
know which. (adjust that name for your architecture) You could also
comment out the line in the %clean section. That will casue it to leave
the $RPM_BUILD_ROOT in place and then you can go in and examine the
structure to see if those files were put where they belong, or not. All
of that should narrow down where in the process the problem is happening.
Next, most of those warnings are caused by missing dependent libraries
or their -devel package. They will be happening no matter how you build.
rpmbuild will not magically fix them. rpmbuild and the .spec file is
just a wrapper around the basic build process and it can be as
elaborate, or not, as the developer chooses to make it. In the %prep
section you could go crazy and test for every possible build dependency,
but this one just makes the assumption that you know what you're
building for and that you have installed the prerequisites you need.
That said, if you don't need to talk to LDAP you can ignore:
configure: WARNING: silently not building rlm_ldap.
configure: WARNING: FAILURE: rlm_ldap requires: libldap_r ldap.h.
...if not, then you better go install openldap and openldap-devel. The
same goes for the rest of that mess. Also, you can create a copy of the
.spec file, change the header accordingly, and then change the
%configure section to only build the required modules.
-Ted-
J Santos wrote:
> I rebuilt the rpm from scratch with >> build.log and got an output of
> warnings only. I am not pasting the complete log but only the warnings.
>
> On the other hand in the /root/rpmbuild/BUILD/freeradius-server-2.1.1
> directory there is a config.log file. On it I could find the same readline
> complains that I got when trying to make from source. Shouldn't rpmbuild
> take care of this ?
>
> I will greatly appreciate if someone could kindly take a look. I am almost
> going back to 32 bits.
>
> I apologise for the big email.
>
> Thanks
>
> Jair Santos
>
>
>
>
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> gmake[6]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_sql_log'
> Making install in rlm_unix...
> gmake[6]: Entering directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_unix'
> if [ "xrlm_unix" != "x" ]; then \
> /usr/bin/libtool --mode=install
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c \
> rlm_unix.la
> /var/tmp/freeradius-server-root/usr/lib64/rlm_unix.la || exit $?; \
> rm -f
> /var/tmp/freeradius-server-root/usr/lib64/rlm_unix-2.1.1.la; \
> ln -s rlm_unix.la
> /var/tmp/freeradius-server-root/usr/lib64/rlm_unix-2.1.1.la || exit $?; \
> fi
> libtool: install: warning: relinking `rlm_unix.la'
> (cd /root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_unix;
> /bin/sh /usr/bin/libtool --mode=relink gcc -release 2.1.1 -module
> -export-dynamic -o rlm_unix.la -rpath /usr/lib64 rlm_unix.lo rlm_unix.c
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/src/lib/libfreeradius-radius.la
> -lnsl -lresolv -lpthread -inst-prefix-dir /var/tmp/freeradius-server-root)
> gcc -shared .libs/rlm_unix.o -L/var/tmp/freeradius-server-root/usr/lib64
> -L/usr/lib64 -lfreeradius-radius -lnsl -lresolv -lpthread -Wl,-soname
> -Wl,rlm_unix-2.1.1.so -o .libs/rlm_unix-2.1.1.so
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c
> .libs/rlm_unix-2.1.1.soT
> /var/tmp/freeradius-server-root/usr/lib64/rlm_unix-2.1.1.so
> (cd /var/tmp/freeradius-server-root/usr/lib64 && { ln -s -f
> rlm_unix-2.1.1.so rlm_unix.so || { rm -f rlm_unix.so && ln -s
> rlm_unix-2.1.1.so rlm_unix.so; }; })
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c
> .libs/rlm_unix.lai /var/tmp/freeradius-server-root/usr/lib64/rlm_unix.la
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c
> .libs/rlm_unix.a /var/tmp/freeradius-server-root/usr/lib64/rlm_unix.a
> chmod 644 /var/tmp/freeradius-server-root/usr/lib64/rlm_unix.a
> ranlib /var/tmp/freeradius-server-root/usr/lib64/rlm_unix.a
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> gmake[6]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_unix'
> Making install in rlm_policy...
> gmake[6]: Entering directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_policy'
> if [ "xrlm_policy" != "x" ]; then \
> /usr/bin/libtool --mode=install
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c \
> rlm_policy.la
> /var/tmp/freeradius-server-root/usr/lib64/rlm_policy.la || exit $?; \
> rm -f
> /var/tmp/freeradius-server-root/usr/lib64/rlm_policy-2.1.1.la; \
> ln -s rlm_policy.la
> /var/tmp/freeradius-server-root/usr/lib64/rlm_policy-2.1.1.la || exit $?; \
> fi
> libtool: install: warning: relinking `rlm_policy.la'
> (cd /root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_policy;
> /bin/sh /usr/bin/libtool --mode=relink gcc -release 2.1.1 -module
> -export-dynamic -o rlm_policy.la -rpath /usr/lib64 rlm_policy.lo parse.lo
> evaluate.lo rlm_policy.c parse.c evaluate.c
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/src/lib/libfreeradius-radius.la
> -lnsl -lresolv -lpthread -inst-prefix-dir /var/tmp/freeradius-server-root)
> gcc -shared .libs/rlm_policy.o .libs/parse.o .libs/evaluate.o
> -L/var/tmp/freeradius-server-root/usr/lib64 -L/usr/lib64 -lfreeradius-radius
> -lnsl -lresolv -lpthread -Wl,-soname -Wl,rlm_policy-2.1.1.so -o
> .libs/rlm_policy-2.1.1.so
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c
> .libs/rlm_policy-2.1.1.soT
> /var/tmp/freeradius-server-root/usr/lib64/rlm_policy-2.1.1.so
> (cd /var/tmp/freeradius-server-root/usr/lib64 && { ln -s -f
> rlm_policy-2.1.1.so rlm_policy.so || { rm -f rlm_policy.so && ln -s
> rlm_policy-2.1.1.so rlm_policy.so; }; })
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c
> .libs/rlm_policy.lai /var/tmp/freeradius-server-root/usr/lib64/rlm_policy.la
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c
> .libs/rlm_policy.a /var/tmp/freeradius-server-root/usr/lib64/rlm_policy.a
> chmod 644 /var/tmp/freeradius-server-root/usr/lib64/rlm_policy.a
> ranlib /var/tmp/freeradius-server-root/usr/lib64/rlm_policy.a
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> gmake[6]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_policy'
> Making install in rlm_dynamic_clients...
> gmake[6]: Entering directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_dynamic_client
> s'
> if [ "xrlm_dynamic_clients" != "x" ]; then \
> /usr/bin/libtool --mode=install
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c \
> rlm_dynamic_clients.la
> /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients.la || exit $?;
> \
> rm -f
> /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients-2.1.1.la; \
> ln -s rlm_dynamic_clients.la
> /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients-2.1.1.la ||
> exit $?; \
> fi
> libtool: install: warning: relinking `rlm_dynamic_clients.la'
> (cd
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_dynamic_clients
> ; /bin/sh /usr/bin/libtool --mode=relink gcc -release 2.1.1 -module
> -export-dynamic -o rlm_dynamic_clients.la -rpath /usr/lib64
> rlm_dynamic_clients.lo rlm_dynamic_clients.c
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/src/lib/libfreeradius-radius.la
> -lnsl -lresolv -lpthread -inst-prefix-dir /var/tmp/freeradius-server-root)
> gcc -shared .libs/rlm_dynamic_clients.o
> -L/var/tmp/freeradius-server-root/usr/lib64 -L/usr/lib64 -lfreeradius-radius
> -lnsl -lresolv -lpthread -Wl,-soname -Wl,rlm_dynamic_clients-2.1.1.so -o
> .libs/rlm_dynamic_clients-2.1.1.so
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c
> .libs/rlm_dynamic_clients-2.1.1.soT
> /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients-2.1.1.so
> (cd /var/tmp/freeradius-server-root/usr/lib64 && { ln -s -f
> rlm_dynamic_clients-2.1.1.so rlm_dynamic_clients.so || { rm -f
> rlm_dynamic_clients.so && ln -s rlm_dynamic_clients-2.1.1.so
> rlm_dynamic_clients.so; }; })
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c
> .libs/rlm_dynamic_clients.lai
> /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients.la
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -c
> .libs/rlm_dynamic_clients.a
> /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients.a
> chmod 644 /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients.a
> ranlib /var/tmp/freeradius-server-root/usr/lib64/rlm_dynamic_clients.a
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> gmake[6]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules/rlm_dynamic_client
> s'
> gmake[5]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules'
> gmake[4]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/modules'
> Making install in main...
> gmake[4]: Entering directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/main'
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 755
> /var/tmp/freeradius-server-root/usr/sbin
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 755
> /var/tmp/freeradius-server-root/usr/bin
> /usr/bin/libtool --mode=install
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radiusd
> /var/tmp/freeradius-server-root/usr/sbin
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755
> .libs/radiusd /var/tmp/freeradius-server-root/usr/sbin/radiusd
> /usr/bin/libtool --mode=install
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radmin
> /var/tmp/freeradius-server-root/usr/sbin
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755
> .libs/radmin /var/tmp/freeradius-server-root/usr/sbin/radmin
> /usr/bin/libtool --mode=install
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radclient
> /var/tmp/freeradius-server-root/usr/bin
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755
> .libs/radclient /var/tmp/freeradius-server-root/usr/bin/radclient
> /usr/bin/libtool --mode=install
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radwho
> /var/tmp/freeradius-server-root/usr/bin
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755
> .libs/radwho /var/tmp/freeradius-server-root/usr/bin/radwho
> /usr/bin/libtool --mode=install
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755
> radconf2xml /var/tmp/freeradius-server-root/usr/bin
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755
> .libs/radconf2xml /var/tmp/freeradius-server-root/usr/bin/radconf2xml
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755
> checkrad.pl /var/tmp/freeradius-server-root/usr/sbin/checkrad
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radlast
> /var/tmp/freeradius-server-root/usr/bin
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radtest
> /var/tmp/freeradius-server-root/usr/bin
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radzap
> /var/tmp/freeradius-server-root/usr/bin
> gmake[4]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src/main'
> gmake[3]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src'
> gmake[2]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/src'
> Making install in raddb...
> gmake[2]: Entering directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/raddb'
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 750
> /var/tmp/freeradius-server-root/etc/raddb
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 750
> /var/tmp/freeradius-server-root/etc/raddb/sites-available
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 750
> /var/tmp/freeradius-server-root/etc/raddb/sites-enabled
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 750
> /var/tmp/freeradius-server-root/etc/raddb/modules
> Creating/updating files in /var/tmp/freeradius-server-root/etc/raddb
> chmod 640 /var/tmp/freeradius-server-root/etc/raddb/clients.conf
> if [ ! -d /var/tmp/freeradius-server-root/etc/raddb/certs ]; then \
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c
> -d -m 750 /var/tmp/freeradius-server-root/etc/raddb/certs; \
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c
> -m 750 certs/bootstrap /var/tmp/freeradius-server-root/etc/raddb/certs; \
> for i in Makefile README xpextensions ca.cnf server.cnf
> client.cnf; do \
>
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 640 certs/$i
> /var/tmp/freeradius-server-root/etc/raddb/certs; \
> done; \
> fi
> if [ ! -d /var/tmp/freeradius-server-root/etc/raddb/sql ]; then \
> find sql -name CVS -prune -o -print | \
> while read file; do \
> if [ -d "$file" ]; then \
>
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 750
> "/var/tmp/freeradius-server-root/etc/raddb/$file"; \
> else \
>
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 640 "$file"
> "/var/tmp/freeradius-server-root/etc/raddb/$file"; \
> fi; \
> done; \
> fi
> if [ ! -f /var/tmp/freeradius-server-root/etc/raddb/sites-enabled/default ];
> then \
> cd /var/tmp/freeradius-server-root/etc/raddb/sites-enabled/;
> \
> ln -s ../sites-available/default; \
> fi
> if [ ! -f
> /var/tmp/freeradius-server-root/etc/raddb/sites-enabled/inner-tunnel ]; then
> \
> cd /var/tmp/freeradius-server-root/etc/raddb/sites-enabled/;
> \
> ln -s ../sites-available/inner-tunnel; \
> fi
> gmake[2]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/raddb'
> Making install in scripts...
> gmake[2]: Entering directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/scripts'
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 rc.radiusd
> /var/tmp/freeradius-server-root/usr/sbin
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755
> radsqlrelay /var/tmp/freeradius-server-root/usr/bin
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 755 radwatch
> /var/tmp/freeradius-server-root/usr/sbin
> gmake[2]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/scripts'
> Making install in doc...
> gmake[2]: Entering directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc'
> gmake[3]: Entering directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc'
> Making install in examples...
> gmake[4]: Entering directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc/examples'
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 755
> /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1/exampl
> es
> for file in *[!~]; do \
> if [ -f $file -a $file != Makefile ]; then \
>
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -m 644 $file
> /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1/exampl
> es; \
> fi; \
> done
> gmake[4]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc/examples'
> Making install in rfc...
> gmake[4]: Entering directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc/rfc'
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c -d -m 755
> /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1/rfc
> for file in `ls -1 *.txt *.html`; do \
> /root/rpmbuild/BUILD/freeradius-server-2.1.1/install-sh -c
> -m 644 $file
> /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1/rfc; \
> done
> gmake[4]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc/rfc'
> gmake[3]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc'
> gmake[2]: Leaving directory
> `/root/rpmbuild/BUILD/freeradius-server-2.1.1/doc'
> gmake[1]: Leaving directory `/root/rpmbuild/BUILD/freeradius-server-2.1.1'
> Installing dictionary files in
> /var/tmp/freeradius-server-root/usr/share/freeradius
> /usr/bin/libtool --finish /var/tmp/freeradius-server-root/usr/lib64
> PATH="$PATH:/sbin" ldconfig -n /var/tmp/freeradius-server-root/usr/lib64
> ----------------------------------------------------------------------
> Libraries have been installed in:
> /var/tmp/freeradius-server-root/usr/lib64
>
> If you ever happen to want to link against installed libraries
> in a given directory, LIBDIR, you must either use libtool, and
> specify the full pathname of the library, or use the `-LLIBDIR'
> flag during linking and do at least one of the following:
> - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> during execution
> - add LIBDIR to the `LD_RUN_PATH' environment variable
> during linking
> - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
> - have your system administrator add LIBDIR to `/etc/ld.so.conf'
>
> See any operating system documentation about shared libraries for
> more information, such as the ld(1) and ld.so(8) manual pages.
> ----------------------------------------------------------------------
> + RADDB=/var/tmp/freeradius-server-root/etc/raddb
> + perl -i -pe 's/^#user =.*$/user = radiusd/'
> /var/tmp/freeradius-server-root/etc/raddb/radiusd.conf
> + perl -i -pe 's/^#group =.*$/group = radiusd/'
> /var/tmp/freeradius-server-root/etc/raddb/radiusd.conf
> + perl -i -pe 's/# shadow =/shadow =/'
> /var/tmp/freeradius-server-root/etc/raddb/radiusd.conf
> + rm -f /var/tmp/freeradius-server-root/usr/sbin/rc.radiusd
> + install -m 0644 CREDITS
> /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1
> + install -m 0644 COPYRIGHT
> /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1
> + install -m 0644 LICENSE
> /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1
> + cd redhat
> + install -m 755 rc.radiusd-redhat
> /var/tmp/freeradius-server-root/etc/rc.d/init.d/radiusd
> + install -m 644 radiusd-logrotate
> /var/tmp/freeradius-server-root/etc/logrotate.d/radiusd
> + install -m 644 radiusd-pam
> /var/tmp/freeradius-server-root/etc/pam.d/radius
> + cd ..
> + /usr/lib/rpm/brp-compress
> + /usr/lib/rpm/brp-strip
> + /usr/lib/rpm/brp-strip-static-archive
> strip: Unable to recognise the format of the input file
> `/var/tmp/freeradius-server-root/usr/lib64/rlm_perl.a(DynaLoader.a)'
> strip: Unable to recognise the format of the input file
> `/var/tmp/freeradius-server-root/usr/lib64/rlm_perl.a(DynaLoader.a)'
> + /usr/lib/rpm/brp-strip-comment-note
> Processing files: freeradius-server-2.1.1-0
> Provides: config(freeradius-server) = 2.1.1-0
> libfreeradius-eap-2.1.1.so()(64bit) libfreeradius-radius-2.1.1.so()(64bit)
> radiusd rlm_acct_unique-2.1.1.so()(64bit) rlm_acctlog-2.1.1.so()(64bit)
> rlm_always-2.1.1.so()(64bit) rlm_attr_filter-2.1.1.so()(64bit)
> rlm_attr_rewrite-2.1.1.so()(64bit) rlm_chap-2.1.1.so()(64bit)
> rlm_checkval-2.1.1.so()(64bit) rlm_copy_packet-2.1.1.so()(64bit)
> rlm_detail-2.1.1.so()(64bit) rlm_digest-2.1.1.so()(64bit)
> rlm_dynamic_clients-2.1.1.so()(64bit) rlm_eap-2.1.1.so()(64bit)
> rlm_eap_gtc-2.1.1.so()(64bit) rlm_eap_leap-2.1.1.so()(64bit)
> rlm_eap_md5-2.1.1.so()(64bit) rlm_eap_mschapv2-2.1.1.so()(64bit)
> rlm_eap_peap-2.1.1.so()(64bit) rlm_eap_sim-2.1.1.so()(64bit)
> rlm_eap_tls-2.1.1.so()(64bit) rlm_eap_ttls-2.1.1.so()(64bit)
> rlm_exec-2.1.1.so()(64bit) rlm_expiration-2.1.1.so()(64bit)
> rlm_expr-2.1.1.so()(64bit) rlm_fastusers-2.1.1.so()(64bit)
> rlm_files-2.1.1.so()(64bit) rlm_krb5-2.1.1.so()(64bit)
> rlm_linelog-2.1.1.so()(64bit) rlm_logintime-2.1.1.so()(64bit)
> rlm_mschap-2.1.1.so()(64bit) rlm_otp-2.1.1.so()(64bit)
> rlm_pap-2.1.1.so()(64bit) rlm_passwd-2.1.1.so()(64bit)
> rlm_perl-2.1.1.so()(64bit) rlm_policy-2.1.1.so()(64bit)
> rlm_preprocess-2.1.1.so()(64bit) rlm_radutmp-2.1.1.so()(64bit)
> rlm_realm-2.1.1.so()(64bit) rlm_sql-2.1.1.so()(64bit)
> rlm_sql_log-2.1.1.so()(64bit) rlm_sql_mysql-2.1.1.so()(64bit)
> rlm_sqlcounter-2.1.1.so()(64bit) rlm_sqlippool-2.1.1.so()(64bit)
> rlm_unix-2.1.1.so()(64bit)
> Requires(interp): /bin/sh /bin/sh /bin/sh /bin/sh
> Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1
> rpmlib(PayloadFilesHavePrefix) <= 4.0-1
> Requires(pre): /bin/sh
> Requires(post): /bin/sh
> Requires(preun): /bin/sh
> Requires(postun): /bin/sh
> Requires: /bin/sh /usr/bin/perl config(freeradius-server) = 2.1.1-0
> ld-linux-x86-64.so.2()(64bit) ld-linux-x86-64.so.2(GLIBC_2.3)(64bit)
> libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3)(64bit)
> libc.so.6(GLIBC_2.3.4)(64bit) libcom_err.so.2()(64bit)
> libcrypt.so.1()(64bit) libcrypt.so.1(GLIBC_2.2.5)(64bit)
> libcrypto.so.6()(64bit) libdl.so.2()(64bit) libdl.so.2(GLIBC_2.2.5)(64bit)
> libfreeradius-eap-2.1.1.so()(64bit) libfreeradius-radius-2.1.1.so()(64bit)
> libk5crypto.so.3()(64bit) libkrb5.so.3()(64bit)
> libkrb5.so.3(krb5_3_MIT)(64bit) libltdl.so.3()(64bit) libm.so.6()(64bit)
> libmysqlclient_r.so.15()(64bit)
> libmysqlclient_r.so.15(libmysqlclient_15)(64bit) libnsl.so.1()(64bit)
> libperl.so()(64bit) libpthread.so.0()(64bit)
> libpthread.so.0(GLIBC_2.2.5)(64bit) libresolv.so.2()(64bit)
> libssl.so.6()(64bit) libutil.so.1()(64bit) libz.so.1()(64bit) perl(DBI)
> perl(Fcntl) perl(Getopt::Std) perl(POSIX) perl(strict) perl(warnings)
> rlm_acct_unique-2.1.1.so()(64bit) rlm_acctlog-2.1.1.so()(64bit)
> rlm_always-2.1.1.so()(64bit) rlm_attr_filter-2.1.1.so()(64bit)
> rlm_attr_rewrite-2.1.1.so()(64bit) rlm_chap-2.1.1.so()(64bit)
> rlm_checkval-2.1.1.so()(64bit) rlm_copy_packet-2.1.1.so()(64bit)
> rlm_detail-2.1.1.so()(64bit) rlm_digest-2.1.1.so()(64bit)
> rlm_dynamic_clients-2.1.1.so()(64bit) rlm_eap-2.1.1.so()(64bit)
> rlm_eap_gtc-2.1.1.so()(64bit) rlm_eap_leap-2.1.1.so()(64bit)
> rlm_eap_md5-2.1.1.so()(64bit) rlm_eap_mschapv2-2.1.1.so()(64bit)
> rlm_eap_peap-2.1.1.so()(64bit) rlm_eap_sim-2.1.1.so()(64bit)
> rlm_eap_tls-2.1.1.so()(64bit) rlm_eap_ttls-2.1.1.so()(64bit)
> rlm_exec-2.1.1.so()(64bit) rlm_expiration-2.1.1.so()(64bit)
> rlm_expr-2.1.1.so()(64bit) rlm_fastusers-2.1.1.so()(64bit)
> rlm_files-2.1.1.so()(64bit) rlm_krb5-2.1.1.so()(64bit)
> rlm_linelog-2.1.1.so()(64bit) rlm_logintime-2.1.1.so()(64bit)
> rlm_mschap-2.1.1.so()(64bit) rlm_otp-2.1.1.so()(64bit)
> rlm_pap-2.1.1.so()(64bit) rlm_passwd-2.1.1.so()(64bit)
> rlm_perl-2.1.1.so()(64bit) rlm_policy-2.1.1.so()(64bit)
> rlm_preprocess-2.1.1.so()(64bit) rlm_radutmp-2.1.1.so()(64bit)
> rlm_realm-2.1.1.so()(64bit) rlm_sql-2.1.1.so()(64bit)
> rlm_sql_log-2.1.1.so()(64bit) rlm_sql_mysql-2.1.1.so()(64bit)
> rlm_sqlcounter-2.1.1.so()(64bit) rlm_sqlippool-2.1.1.so()(64bit)
> rlm_unix-2.1.1.so()(64bit) rtld(GNU_HASH)
> Conflicts: cistron-radius
> Checking for unpackaged file(s): /usr/lib/rpm/check-files
> /var/tmp/freeradius-server-root
> Wrote: /root/rpmbuild/RPMS/x86_64/freeradius-server-2.1.1-0.x86_64.rpm
> Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.50908
> + umask 022
> + cd /root/rpmbuild/BUILD
> + cd freeradius-server-2.1.1
> + '[' /var/tmp/freeradius-server-root '!=' / ']'
> + rm -rf /var/tmp/freeradius-server-root
> + exit 0
> [root at maui SPECS]# rpmbuild -bb freeradius.spec >> build.log
> + umask 022
> + cd /root/rpmbuild/BUILD
> + cd /root/rpmbuild/BUILD
> + rm -rf freeradius-server-2.1.1
> + /bin/gzip -dc /root/rpmbuild/SOURCES/freeradius-server-2.1.1.tar.gz
> + tar -xvvf -
> + STATUS=0
> + '[' 0 -ne 0 ']'
> + cd freeradius-server-2.1.1
> ++ /usr/bin/id -u
> + '[' 0 = 0 ']'
> + /bin/chown -Rhf root .
> ++ /usr/bin/id -u
> + '[' 0 = 0 ']'
> + /bin/chgrp -Rhf root .
> + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
> + exit 0
> + umask 022
> + cd /root/rpmbuild/BUILD
> + cd freeradius-server-2.1.1
> + CFLAGS='-O2 -g'
> + CFLAGS='-O2 -g'
> + export CFLAGS
> + CXXFLAGS='-O2 -g'
> + export CXXFLAGS
> + FFLAGS='-O2 -g'
> + export FFLAGS
> + ./configure --host=x86_64-redhat-linux-gnu --build=x86_64-redhat-linux-gnu
> --target=x86_64-redhat-linux --program-prefix= --prefix=/usr
> --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc
> --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64
> --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com
> --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr
> --localstatedir=/var --sysconfdir=/etc --mandir=/usr/share/man
> --with-docdir=/usr/share/doc/freeradius-server-2.1.1 --with-system-libtool
> --disable-ltdl-install --with-ltdl-lib=/usr/lib
> --with-ltdl-include=/usr/include --with-large-files --with-udpfromto
> --with-edir --with-rlm-sql_postgresql-include-dir=/usr/include/pgsql
> --with-rlm-krb5-include-dir=/usr/kerberos/include
> --with-rlm-krb5-lib-dir=/usr/kerberos/lib
> configure: WARNING: pcap library not found, silently disabling the RADIUS
> sniffer.
> config.status: WARNING: ./Make.inc.in seems to ignore the --datarootdir
> setting
> config.status: WARNING: ./src/include/build-radpaths-h.in seems to ignore
> the --datarootdir setting
> configure: WARNING: silently not building rlm_counter.
> configure: WARNING: FAILURE: rlm_counter requires: libgdbm.
> configure: WARNING: FAILURE: rlm_dbm requires: (ndbm.h or gdbm/ndbm.h or
> gdbm-ndbm.h) (libndbm or libgdbm or libgdbm_compat).
> configure: WARNING: silently not building rlm_dbm.
> configure: WARNING: the TNCS library isn't found!
> configure: WARNING: silently not building rlm_eap_tnc.
> configure: WARNING: FAILURE: rlm_eap_tnc requires: -lTNCS.
> configure: WARNING: silently not building rlm_eap_ikev2.
> configure: WARNING: FAILURE: rlm_eap_ikev2 requires: libeap-ikev2
> EAPIKEv2/connector.h.
> configure: WARNING: silently not building rlm_ippool.
> configure: WARNING: FAILURE: rlm_ippool requires: libgdbm.
> configure: WARNING: silently not building rlm_ldap.
> configure: WARNING: FAILURE: rlm_ldap requires: libldap_r ldap.h.
> configure: WARNING: silently not building rlm_pam.
> configure: WARNING: FAILURE: rlm_pam requires: libpam.
> configure: WARNING: silently not building rlm_python.
> configure: WARNING: FAILURE: rlm_python requires: Python.h.
> configure: WARNING: silently not building rlm_sql_iodbc.
> configure: WARNING: FAILURE: rlm_sql_iodbc requires: libiodbc isql.h.
> configure: WARNING: silently not building rlm_sql_postgresql.
> configure: WARNING: FAILURE: rlm_sql_postgresql requires: libpq-fe.h libpq.
> configure: WARNING: oracle headers not found. Use
> --with-oracle-home-dir=<path>.
> configure: WARNING: silently not building rlm_sql_oracle.
> configure: WARNING: FAILURE: rlm_sql_oracle requires: oci.h.
> configure: WARNING: silently not building rlm_sql_unixodbc.
> configure: WARNING: FAILURE: rlm_sql_unixodbc requires: sql.h.
> + make
> radius.c: In function 'vp2data':
> radius.c:680: warning: passing argument 2 of 'make_passwd' from incompatible
> pointer type
> radius.c:706: warning: passing argument 2 of 'make_tunnel_passwd' from
> incompatible pointer type
> radius.c:713: warning: passing argument 2 of 'make_tunnel_passwd' from
> incompatible pointer type
> rlm_eap_gtc.c: In function 'gtc_authenticate':
> rlm_eap_gtc.c:203: warning: format '%d' expects type 'int', but argument 2
> has type 'size_t'
> rlm_eap_gtc.c:203: warning: format '%d' expects type 'int', but argument 3
> has type 'size_t'
> rlm_eap_sim.c: In function 'eap_sim_getchalans':
> rlm_eap_sim.c:159: warning: format '%d' expects type 'int', but argument 3
> has type 'size_t'
> rlm_eap_sim.c:172: warning: format '%d' expects type 'int', but argument 3
> has type 'size_t'
> rlm_eap_sim.c:185: warning: format '%d' expects type 'int', but argument 3
> has type 'size_t'
> rlm_eap_sim.c: In function 'process_eap_sim_start':
> rlm_eap_sim.c:471: warning: format '%d' expects type 'int', but argument 2
> has type 'size_t'
> radeapclient.c: In function 'process_eap_start':
> radeapclient.c:292: warning: format '%d' expects type 'int', but argument 3
> has type 'size_t'
> radeapclient.c:302: warning: format '%d' expects type 'int', but argument 4
> has type 'size_t'
> radeapclient.c: In function 'respond_eap_md5':
> radeapclient.c:759: warning: format '%d' expects type 'int', but argument 3
> has type 'size_t'
> radeapclient.c:759: warning: format '%d' expects type 'int', but argument 4
> has type 'size_t'
> rlm_krb5.c: In function 'verify_krb5_tgt':
> rlm_krb5.c:98: warning: passing argument 2 of 'krb5_kt_read_service_key'
> discards qualifiers from pointer target type
> rlm_mschap.c: In function 'mschap_detach':
> rlm_mschap.c:633: warning: passing argument 1 of 'free' discards qualifiers
> from pointer target type
> otp_rlm.c: In function 'otp_instantiate':
> otp_rlm.c:84: warning: pointer targets in passing argument 1 of
> 'otp_get_random' differ in signedness
> otp_rlm.c: In function 'otp_authorize':
> otp_rlm.c:247: warning: pointer targets in passing argument 3 of
> 'otp_gen_state' differ in signedness
> otp_rlm.c: In function 'otp_authenticate':
> otp_rlm.c:340: warning: pointer targets in passing argument 1 of 'otp_a2x'
> differ in signedness
> otp_rlm.c:375: warning: pointer targets in passing argument 3 of
> 'otp_pw_valid' differ in signedness
> otp_radstate.c: In function 'otp_gen_state':
> otp_radstate.c:145: warning: pointer targets in passing argument 1 of
> 'otp_x2a' differ in signedness
> otp_util.c: In function 'otp_async_challenge':
> otp_util.c:63: warning: pointer targets in passing argument 1 of
> 'otp_get_random' differ in signedness
> otp_mppe.c: In function 'otp_mppe':
> otp_mppe.c:419: warning: pointer targets in passing argument 1 of 'sprintf'
> differ in signedness
> otp_mppe.c:421: warning: pointer targets in passing argument 2 of 'pairmake'
> differ in signedness
> otp_mppe.c:461: warning: pointer targets in passing argument 1 of 'sprintf'
> differ in signedness
> otp_mppe.c:463: warning: pointer targets in passing argument 2 of 'pairmake'
> differ in signedness
> rlm_pap.c: In function 'pap_authenticate':
> rlm_pap.c:714: warning: pointer targets in passing argument 1 of
> 'radius_xlat' differ in signedness
> rlm_pap.c:719: warning: pointer targets in passing argument 1 of
> 'fr_hex2bin' differ in signedness
> rlm_pap.c:739: warning: pointer targets in passing argument 1 of
> 'radius_xlat' differ in signedness
> rlm_pap.c:744: warning: pointer targets in passing argument 1 of
> 'fr_hex2bin' differ in signedness
> rlm_pap.c:770: warning: pointer targets in passing argument 2 of
> 'fr_hex2bin' differ in signedness
> rlm_perl.c: In function 'perl_xlat':
> rlm_perl.c:639: warning: ISO C90 forbids mixed declarations and code
> rlm_perl.c:674: warning: value computed is not used
> rlm_perl.c:681: warning: format '%d' expects type 'int', but argument 3 has
> type 'size_t'
> rlm_perl.c:681: warning: format '%d' expects type 'int', but argument 5 has
> type 'size_t'
> rlm_perl.c: In function 'rlmperl_call':
> rlm_perl.c:1023: warning: value computed is not used
> rlm_policy.c: In function 'policy_instantiate':
> rlm_policy.c:103: warning: passing argument 2 of 'rbtree_create' from
> incompatible pointer type
> rlm_policy.c: In function 'rlm_policy_free_item':
> rlm_policy.c:265: warning: passing argument 1 of 'free' discards qualifiers
> from pointer target type
> rlm_policy.c:275: warning: passing argument 1 of 'free' discards qualifiers
> from pointer target type
> parse.c: In function 'parse_named_policy':
> parse.c:1535: warning: passing argument 1 of 'rlm_policy_print' from
> incompatible pointer type
> listen.c: In function 'client_listener_find':
> listen.c:141: warning: passing argument 1 of 'listener->print' discards
> qualifiers from pointer target type
> listen.c:220: warning: assignment discards qualifiers from pointer target
> type
> In file included from listen.c:1024:
> command.c: In function 'command_show_client_config':
> command.c:805: warning: passing argument 2 of 'cf_section2file' discards
> qualifiers from pointer target type
> listen.c: In function 'listen_bind':
> listen.c:1175: warning: implicit declaration of function 'udpfromto_init'
> log.c: In function 'radlog_request':
> log.c:386: warning: assignment discards qualifiers from pointer target type
> radiusd.c: In function 'main':
> radiusd.c:159: warning: passing argument 1 of 'free' discards qualifiers
> from pointer target type
> radiusd.c:441: warning: passing argument 1 of 'free' discards qualifiers
> from pointer target type
> xlat.c: In function 'xlat_packet':
> xlat.c:185: warning: format '%d' expects type 'int', but argument 4 has type
> 'size_t'
> xlat.c:185: warning: format '%d' expects type 'int', but argument 4 has type
> 'size_t'
> xlat.c: In function 'xlat_register':
> xlat.c:514: warning: passing argument 3 of 'xlat_register' discards
> qualifiers from pointer target type
> xlat.c:523: warning: passing argument 3 of 'xlat_register' discards
> qualifiers from pointer target type
> xlat.c:535: warning: passing argument 3 of 'xlat_register' discards
> qualifiers from pointer target type
> xlat.c:543: warning: passing argument 3 of 'xlat_register' discards
> qualifiers from pointer target type
> event.c: In function 'request_pre_handler':
> event.c:1247: warning: passing argument 4 of 'radius_evaluate_condition'
> from incompatible pointer type
> + exit 0
> + umask 022
> + cd /root/rpmbuild/BUILD
> + cd freeradius-server-2.1.1
> + '[' /var/tmp/freeradius-server-root '!=' / ']'
> + rm -rf /var/tmp/freeradius-server-root
> + mkdir -p /var/tmp/freeradius-server-root/etc/logrotate.d
> /var/tmp/freeradius-server-root/etc/pam.d
> /var/tmp/freeradius-server-root/etc/rc.d/init.d
> + make install R=/var/tmp/freeradius-server-root
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_acctlog.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_acct_unique.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_always.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_attr_filter.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_attr_rewrite.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_chap.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_checkval.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_copy_packet.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_detail.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_digest.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `libfreeradius-eap.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_eap_gtc.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_eap_leap.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_eap_md5.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_eap_mschapv2.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_eap_peap.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_eap_sim.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_eap_tls.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_eap_ttls.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_eap.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_exec.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_expiration.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_expr.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_fastusers.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_files.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_krb5.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_linelog.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_logintime.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_mschap.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_otp.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_pap.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_passwd.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_perl.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_preprocess.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_radutmp.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_realm.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_sql.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_sqlcounter.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_sqlippool.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_sql_log.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_unix.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_policy.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> libtool: install: warning: relinking `rlm_dynamic_clients.la'
> libtool: install: warning: remember to run `libtool --finish /usr/lib64'
> + RADDB=/var/tmp/freeradius-server-root/etc/raddb
> + perl -i -pe 's/^#user =.*$/user = radiusd/'
> /var/tmp/freeradius-server-root/etc/raddb/radiusd.conf
> + perl -i -pe 's/^#group =.*$/group = radiusd/'
> /var/tmp/freeradius-server-root/etc/raddb/radiusd.conf
> + perl -i -pe 's/# shadow =/shadow =/'
> /var/tmp/freeradius-server-root/etc/raddb/radiusd.conf
> + rm -f /var/tmp/freeradius-server-root/usr/sbin/rc.radiusd
> + install -m 0644 CREDITS
> /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1
> + install -m 0644 COPYRIGHT
> /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1
> + install -m 0644 LICENSE
> /var/tmp/freeradius-server-root/usr/share/doc/freeradius-server-2.1.1
> + cd redhat
> + install -m 755 rc.radiusd-redhat
> /var/tmp/freeradius-server-root/etc/rc.d/init.d/radiusd
> + install -m 644 radiusd-logrotate
> /var/tmp/freeradius-server-root/etc/logrotate.d/radiusd
> + install -m 644 radiusd-pam
> /var/tmp/freeradius-server-root/etc/pam.d/radius
> + cd ..
> + /usr/lib/rpm/brp-compress
> + /usr/lib/rpm/brp-strip
> + /usr/lib/rpm/brp-strip-static-archive
> strip: Unable to recognise the format of the input file
> `/var/tmp/freeradius-server-root/usr/lib64/rlm_perl.a(DynaLoader.a)'
> strip: Unable to recognise the format of the input file
> `/var/tmp/freeradius-server-root/usr/lib64/rlm_perl.a(DynaLoader.a)'
> + /usr/lib/rpm/brp-strip-comment-note
> + umask 022
> + cd /root/rpmbuild/BUILD
> + cd freeradius-server-2.1.1
> + '[' /var/tmp/freeradius-server-root '!=' / ']'
> + rm -rf /var/tmp/freeradius-server-root
> + exit 0
> [root at maui SPECS]#
>
>
>
>
>
>
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
More information about the Freeradius-Users
mailing list