Newslists

[Keith Dovale - HostworX.co.za]

No not at all, and I don’t expect it. 

But at least someone like yourself, who seems to be the guru on freeradius, could at least reply with a constructive answer rather than replying with sarcastic comments.

My question is where did I announce I don’t read the documentation that is the first thing I went to.

I have gone through the read me's, faq's etc and have followed their directions regarding this, it’s the debug that is giving the error. And responding with weird checks, that is exactly why I posted here as there is no google results / faqs, etc that answer my question.


Regards

Keith



-----Original Message-----
From: freeradius-users-bounces+keith=hostworx.co.za at lists.freeradius.org [mailto:freeradius-users-bounces+keith=hostworx.co.za at lists.freeradius.org] On Behalf Of Alan DeKok
Sent: Friday, February 08, 2008 9:44 AM
To: FreeRadius users mailing list
Subject: Re: Newslists

Keith Dovale - HostworX.co.za wrote:
> My Honest opinion of this news list / user group is that it is not
> helpful at all, it seems if you are not in the click, no one helps, does
> anyone moderate this or not ? I have posted twice now and no one replies…

  Is there a contractual obligation requiring people to support you?

  In any case, you haven't followed the instructions in the FAQ, README,
INSTALL, etc.  You've already announced that you don't read the
documentation people write, so why would anyone write more on this list?

>  
> 
> Regards
> 
>  
> 
> Keith
> 
>  
> 
> *From:* Keith Dovale - HostworX.co.za [mailto:keith at HostworX.co.za]
> *Sent:* Thursday, February 07, 2008 9:08 PM
> *To:*       '
> *Subject:* attr rewrite issue
> 
>  
> 
> Hi Guys, some help please .
> 
>  
> 
> I am trying to do a attr rewrite to change an Attribute value then do a
> check based on the attribute that is changed, if the check fails do
> another attrib rewrite to the next value and do another check, until
> either the check fails or passes. There is basically only 4 checks in
> the group statement in the authorise section which do
> 
>  
> 
> Attrib rewrite
> 
> Do check
> 
> (If it fails do)
> 
>  
> 
> Attrib rewrite
> 
> Do check
> 
> (If it fails do)
> 
>  
> 
> Attrib check
> 
> Do rewrite
> 
> (If it fails do)
> 
>  
> 
> Attrib check
> 
> Do rewrite
> 
> Reject
> 
>                 Pass
> 
>  
> 
> When it runs it checks the reply packet for an attribute
> Configuration-Token which is defined in the radgroupreply for the users
> but it seems it cannot find it and gives an error. As below
> 
>                
> 
> rlm_sqlcounter: (Check item - counter) is less than zero
> 
> rlm_sqlcounter: Rejected user keith, check_item=0, counter=0
> 
>   modcall[authorize]: module "MonthlyUnShaped" returns reject for request 2
> 
> radius_xlat:  'UNSHAPED_NORMAL'
> 
> rlm_attr_rewrite: No match found for attribute Configuration-Token with
> value 'SHAPED_NORMAL'
> 
> radius_xlat:  'UNSHAPED_NORMAL'
> 
> radius_xlat:  'SHAPED_NORMAL'
> 
> rlm_attr_rewrite: Changed value for attribute Configuration-Token from
> 'UNSHAPED_NORMAL' to 'SHAPED_NORMAL'
> 
> rlm_attr_rewrite: Could not find value pair for attribute
> Configuration-Token
> 
>   modcall[authorize]: module "AttrRewrite_MonthlyBlendedShaped" returns
> ok for request 2
> 
>  
> 
> can anyone help
> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html