IP Pool defined, but radius does not hand out an IP address.

[tnt at kalik.co.yu]

It's all in black and white:

	#  for different users. The Pool-Name attribute is a *check* item not
	#  a reply item.
	#
	# Example:
	# radiusd.conf: ippool students { [...] }
	# users file  : DEFAULT Group == students, Pool-Name := "students"
	#

Yet, you have put it as a reply item.

Ivan Kalik
Kalik Informatika ISP


Dana 24/1/2008, "Andrew D Kirch" <trelane at trelane.net> piše:

>When I connect a client to freeradius the client authenticates, gets an
>accept/accept, but does not get an IP address.  I've tried it with the
>Group and Pool-Name directives in each client's block, and I've tried it
>with them in a DEFAULT by themselves.  Neither has handed out an IP address.
>
>System vitals:
>radius:/etc/freeradius# uname -a
>Linux radius 2.6.18-5-686 #1 SMP Mon Dec 24 16:41:07 UTC 2007 i686 GNU/Linux
>radius:/etc/freeradius# cat /etc/debian_version
>4.0
>radius:/etc/freeradius# freeradius -v
>freeradius: FreeRADIUS Version 1.1.3, for host i486-pc-linux-gnu, built
>on Dec 16 2006 at 23:48:11
>
># radtest umcc xxxxxx localhost 0 xxxxxxx
>Sending Access-Request of id 144 to 127.0.0.1 port 1812
>        User-Name = "umcc"
>        User-Password = "bts10200"
>        NAS-IP-Address = 255.255.255.255
>        NAS-Port = 0
>rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=144, length=44
>        Service-Type = Framed-User
>        Framed-IP-Netmask = 255.255.255.255
>        Framed-Protocol = PPP
>        Framed-Compression = Van-Jacobson-TCP-IP
>
>radius.log:
>Thu Jan 24 11:20:51 2008 : Info: rlm_exec: Wait=yes but no output
>defined. Did you mean output=none?
>Thu Jan 24 11:20:51 2008 : Info: Ready to process requests.
>Thu Jan 24 11:32:33 2008 : Auth: Login OK: [umcc] (from client
>localhost-testing port 0)
>
>users:
>umcc    User-Password == "xxxxxx"
>        Service-Type = Framed-User,
>        Framed-IP-Netmask = 255.255.255.255,
>        Group == main_pool,
>        Pool-Name := "main_pool",
>        Framed-Protocol = PPP,
>        Framed-Compression = Van-Jacobsen-TCP-IP
>
>radiusd.conf (pertinent sections)
>     ippool main_pool {
>                range-start = 208.64.35.2
>                range-stop = 208.64.35.254
>                netmask = 255.255.255.255
>                cache-size = 253
>                session-db = ${raddbdir}/db.ippool
>                ip-index = ${raddbdir}/db.ipindex
>                override = yes
>                maximum-timeout = 0
>        }
>accounting {
>        detail
>        unix
>        radutmp
>        main_pool
>}
>post-auth {
>        main_pool
>}
>
>
>
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>