rlm_pap: WARNING! No "known good" password found for the user.

[Maciej Drobniuch]

Hi!

>radtest fred somepass localhost 1813 somesecret
Sending Access-Request of id 102 to 127.0.0.1 port 1812
        User-Name = "fred"
        User-Password = "somepass"
        NAS-IP-Address = 127.0.0.1
        NAS-Port = 1813
rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=102,
length=20
rad_verify: Received Access-Reject packet from client 127.0.0.1 port 1812
with invalid signature (err=2)!  (Shared secret is incorrect.)

>radiusd -X
rad_recv: Access-Request packet from host 127.0.0.1 port 32770, id=102,
length=56
        User-Name = "fred"
        User-Password = "h\347`\005\270\202\336<\336i~e\031\r\021["
        NAS-IP-Address = 127.0.0.1
        NAS-Port = 1813
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
    rlm_realm: No '@' in User-Name = "fred", looking up realm NULL
    rlm_realm: No such realm "NULL"
++[suffix] returns noop
  rlm_eap: No EAP-Message, not doing EAP
++[eap] returns noop
++[unix] returns notfound
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
rlm_pap: WARNING! No "known good" password found for the user. 
Authentication may fail because of this.
++[pap] returns noop
auth: No authenticate method (Auth-Type) configuration found for the
request: Rejecting the user
auth: Failed to validate the user.
  WARNING: Unprintable characters in the password.        Double-check the
shared secret on the server and the NAS!
  Found Post-Auth-Type Reject
+- entering group REJECT
        expand: %{User-Name} -> fred
 attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Sending Access-Reject of id 102 to 127.0.0.1 port 32770
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 2 ID 102 with timestamp +151
Ready to process requests.

>cat client.conf
client 127.0.0.1 {
        secret          = somesecret
        shortname       = localhost
        nastype         = other
}

>cat users
fred       Cleartext-Password =="somepass"
           Service-Type = Framed-User,
           Framed-Protocol = PPP

wilma      Auth-Type := CHAP, User-password =="somepass"
           Service-Type = Framed-User,
           Framed-Protocol = PPP

barney     Auth-Type := MS-CHAP, User-Password == "somepass"
           Service-Type = Framed-User,
           Framed-Protocol = PPP

What's wrong with this line >User-Password =
"h\347`\005\270\202\336<\336i~e\031\r\021[" ???
Thanks for the support!

-- 
------------------------
Maciej Drobniuch