rlm_pap: WARNING! No "known good" password found for the user.
Ivan Kalik
tnt at kalik.net
Fri Jul 11 20:30:26 CEST 2008
You probably have two instances of the server installed. These files
don't belong to the server that is running.
Ivan Kalik
Kalik Informatika ISP
Dana 11/7/2008, "Maciej Drobniuch" <maciej at drobniuch.pl> piše:
>
>Hi!
>
>>radtest fred somepass localhost 1813 somesecret
>Sending Access-Request of id 102 to 127.0.0.1 port 1812
> User-Name = "fred"
> User-Password = "somepass"
> NAS-IP-Address = 127.0.0.1
> NAS-Port = 1813
>rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=102,
>length=20
>rad_verify: Received Access-Reject packet from client 127.0.0.1 port 1812
>with invalid signature (err=2)! (Shared secret is incorrect.)
>
>>radiusd -X
>rad_recv: Access-Request packet from host 127.0.0.1 port 32770, id=102,
>length=56
> User-Name = "fred"
> User-Password = "h\347`\005\270\202\336<\336i~e\031\r\021["
> NAS-IP-Address = 127.0.0.1
> NAS-Port = 1813
>+- entering group authorize
>++[preprocess] returns ok
>++[chap] returns noop
>++[mschap] returns noop
> rlm_realm: No '@' in User-Name = "fred", looking up realm NULL
> rlm_realm: No such realm "NULL"
>++[suffix] returns noop
> rlm_eap: No EAP-Message, not doing EAP
>++[eap] returns noop
>++[unix] returns notfound
>++[files] returns noop
>++[expiration] returns noop
>++[logintime] returns noop
>rlm_pap: WARNING! No "known good" password found for the user.
>Authentication may fail because of this.
>++[pap] returns noop
>auth: No authenticate method (Auth-Type) configuration found for the
>request: Rejecting the user
>auth: Failed to validate the user.
> WARNING: Unprintable characters in the password. Double-check the
>shared secret on the server and the NAS!
> Found Post-Auth-Type Reject
>+- entering group REJECT
> expand: %{User-Name} -> fred
> attr_filter: Matched entry DEFAULT at line 11
>++[attr_filter.access_reject] returns updated
>Sending Access-Reject of id 102 to 127.0.0.1 port 32770
>Finished request 2.
>Going to the next request
>Waking up in 4.9 seconds.
>Cleaning up request 2 ID 102 with timestamp +151
>Ready to process requests.
>
>>cat client.conf
>client 127.0.0.1 {
> secret = somesecret
> shortname = localhost
> nastype = other
>}
>
>>cat users
>fred Cleartext-Password =="somepass"
> Service-Type = Framed-User,
> Framed-Protocol = PPP
>
>wilma Auth-Type := CHAP, User-password =="somepass"
> Service-Type = Framed-User,
> Framed-Protocol = PPP
>
>barney Auth-Type := MS-CHAP, User-Password == "somepass"
> Service-Type = Framed-User,
> Framed-Protocol = PPP
>
>What's wrong with this line >User-Password =
>"h\347`\005\270\202\336<\336i~e\031\r\021[" ???
>Thanks for the support!
>
>--
>------------------------
>Maciej Drobniuch
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>
More information about the Freeradius-Users
mailing list