No authentication method (AUth Type) problem.

[Raja Peer]

Hi Andy,

Getting this same error before and
I was missing raddb/sites-available/inner-tunnel file.

Thanks

Raja



Andy An wrote:
> 
> Hi:
> I am a new guy to deal with freeradius/wireless stuff.
> 
> I use freeradius 2.0.5 with LDAP back end.
> If I test with radtest (localhost) or with NTRadPing (from another WINXP
> machine)it works fine(return Access-Accept).
> But if I test with MAC Airport as a client and Netgear WG 302 as a AP it
> fails again and agian no matter how I adjust the configuration file around
> (e.g. eap.conf, sites-eabled/ldap, radiusd.conf etc.)
> 
> 
> Thanks in advance for any help/clue/guide.
> 
> 
> P.S.
> -----------Mac client settings:
> 802.1x enabled with PEAP(outer identity: none) and TTLS(inner auth: 
> mschapv2 outer identity: none)
> Security: WPA enterprise
> 
> -----------Netgear WG302 settings:
> Security: WPA with radius
> Data encrypt: TKIP+AES
> Auth server port: 1812
> Acc server port: 1813
> 
> ----------- the info cut from the radiusd.-X output:
> 
> rlm_ldap: looking for reply items in directory...
> WARNING: No "known good" password was found in LDAP.  Are you sure that 
> the user is configured correctly?
> rlm_ldap: user andyan authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> ++[ldap] returns ok
> ++[expiration] returns noop
> ++[logintime] returns noop
> ++[pap] returns noop
> auth: No authenticate method (Auth-Type) configuration found for the 
> request: Rejecting the user *(It might be problematic from here)*
> auth: Failed to validate the user.
>   TTLS: Got tunneled Access-Reject
>  rlm_eap: Handler failed in EAP/ttls
>   rlm_eap: Failed in EAP select
> ++[eap] returns invalid
> auth: Failed to validate the user.
>   Found Post-Auth-Type Reject
> +- entering group REJECT
>         expand: %{User-Name} -> andyan
>  attr_filter: Matched entry DEFAULT at line 11
> ++[attr_filter.access_reject] returns updated
> Sending Access-Reject of id 23 to 10.10.10.228 port 1059
>         EAP-Message = 0x04050004
>         Message-Authenticator = 0x00000000000000000000000000000000
> Finished request 5.
> Going to the next request
> 
> -----------------
> 
> 
> -- 
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
> 
> 

-- 
View this message in context: http://www.nabble.com/No-authentication-method-%28AUth-Type%29-problem.-tp18017338p18018301.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.