No authentication method (AUth Type) problem.

[Ivan Kalik]

Don't set Auth-Type. Don't delete parts of the debug if you don't know
what is going on. What you have deleted is vital. Where is password
suposed to be?

Ivan Kalik
Kalik Informatika ISP


Dana 19/6/2008, "Jelle Langbroek" <jml at orkz.net> piše:

>Yep, I got the same error with 2.0.5 (SQL, not LDAP). It might have
>something to do with the radgroupcheck table not having the Aut-Type set
>correctly (to EAP maybe?). Hadn't got time for testing that. Maybe you have
>some use for this information. Please post if it works!
>
>Jelle
>
>2008/6/19 Andy An <andyan at eciad.ca>:
>
>> Hi:
>> I am a new guy to deal with freeradius/wireless stuff.
>>
>> I use freeradius 2.0.5 with LDAP back end.
>> If I test with radtest (localhost) or with NTRadPing (from another WINXP
>> machine)it works fine(return Access-Accept).
>> But if I test with MAC Airport as a client and Netgear WG 302 as a AP it
>> fails again and agian no matter how I adjust the configuration file around
>> (e.g. eap.conf, sites-eabled/ldap, radiusd.conf etc.)
>>
>>
>> Thanks in advance for any help/clue/guide.
>>
>>
>> P.S.
>> -----------Mac client settings:
>> 802.1x enabled with PEAP(outer identity: none) and TTLS(inner auth:
>> mschapv2 outer identity: none)
>> Security: WPA enterprise
>>
>> -----------Netgear WG302 settings:
>> Security: WPA with radius
>> Data encrypt: TKIP+AES
>> Auth server port: 1812
>> Acc server port: 1813
>>
>> ----------- the info cut from the radiusd.-X output:
>>
>> rlm_ldap: looking for reply items in directory...
>> WARNING: No "known good" password was found in LDAP.  Are you sure that the
>> user is configured correctly?
>> rlm_ldap: user andyan authorized to use remote access
>> rlm_ldap: ldap_release_conn: Release Id: 0
>> ++[ldap] returns ok
>> ++[expiration] returns noop
>> ++[logintime] returns noop
>> ++[pap] returns noop
>> auth: No authenticate method (Auth-Type) configuration found for the
>> request: Rejecting the user *(It might be problematic from here)*
>> auth: Failed to validate the user.
>>  TTLS: Got tunneled Access-Reject
>> rlm_eap: Handler failed in EAP/ttls
>>  rlm_eap: Failed in EAP select
>> ++[eap] returns invalid
>> auth: Failed to validate the user.
>>  Found Post-Auth-Type Reject
>> +- entering group REJECT
>>       expand: %{User-Name} -> andyan
>> attr_filter: Matched entry DEFAULT at line 11
>> ++[attr_filter.access_reject] returns updated
>> Sending Access-Reject of id 23 to 10.10.10.228 port 1059
>>       EAP-Message = 0x04050004
>>       Message-Authenticator = 0x00000000000000000000000000000000
>> Finished request 5.
>> Going to the next request
>>
>> -----------------
>>
>>
>> --
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>>
>
>