No authentication method (AUth Type) problem.

[Jelle Langbroek]

Yep, I got the same error with 2.0.5 (SQL, not LDAP). It might have
something to do with the radgroupcheck table not having the Aut-Type set
correctly (to EAP maybe?). Hadn't got time for testing that. Maybe you have
some use for this information. Please post if it works!

Jelle

2008/6/19 Andy An <andyan at eciad.ca>:

> Hi:
> I am a new guy to deal with freeradius/wireless stuff.
>
> I use freeradius 2.0.5 with LDAP back end.
> If I test with radtest (localhost) or with NTRadPing (from another WINXP
> machine)it works fine(return Access-Accept).
> But if I test with MAC Airport as a client and Netgear WG 302 as a AP it
> fails again and agian no matter how I adjust the configuration file around
> (e.g. eap.conf, sites-eabled/ldap, radiusd.conf etc.)
>
>
> Thanks in advance for any help/clue/guide.
>
>
> P.S.
> -----------Mac client settings:
> 802.1x enabled with PEAP(outer identity: none) and TTLS(inner auth:
> mschapv2 outer identity: none)
> Security: WPA enterprise
>
> -----------Netgear WG302 settings:
> Security: WPA with radius
> Data encrypt: TKIP+AES
> Auth server port: 1812
> Acc server port: 1813
>
> ----------- the info cut from the radiusd.-X output:
>
> rlm_ldap: looking for reply items in directory...
> WARNING: No "known good" password was found in LDAP.  Are you sure that the
> user is configured correctly?
> rlm_ldap: user andyan authorized to use remote access
> rlm_ldap: ldap_release_conn: Release Id: 0
> ++[ldap] returns ok
> ++[expiration] returns noop
> ++[logintime] returns noop
> ++[pap] returns noop
> auth: No authenticate method (Auth-Type) configuration found for the
> request: Rejecting the user *(It might be problematic from here)*
> auth: Failed to validate the user.
>  TTLS: Got tunneled Access-Reject
> rlm_eap: Handler failed in EAP/ttls
>  rlm_eap: Failed in EAP select
> ++[eap] returns invalid
> auth: Failed to validate the user.
>  Found Post-Auth-Type Reject
> +- entering group REJECT
>       expand: %{User-Name} -> andyan
> attr_filter: Matched entry DEFAULT at line 11
> ++[attr_filter.access_reject] returns updated
> Sending Access-Reject of id 23 to 10.10.10.228 port 1059
>       EAP-Message = 0x04050004
>       Message-Authenticator = 0x00000000000000000000000000000000
> Finished request 5.
> Going to the next request
>
> -----------------
>
>
> --
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20080619/b458489d/attachment.html>