Re Can't get the value of 'Digest-User-name', 'Digest-Realm', 'Digest-Method', 'Digest-Uri', 'Digest-Nonce', 'Digest-Response'

[johnson elangbam]

 >You are asking your questions on a wrong list. There is nothing you can
>do on a radius server in order to get those attributes if radius client
>is not sending Digest-Attributes. Direct your question to SER server
>support.

hi Kalik,
            After I've done some changes in dictionary of radius server I
can see the output sending digest attributes from the client, but still i
didn't get the values at the radius server. Is it the problem of my
configuration of radius server or it may be some other client configuration.
Please advice, sorry for posting the same question again.

 Please tell me the possible problems of not getting these values:
'Digest-User-name', 'Digest-Realm',   'Digest-Method', 'Digest-Uri',
'Digest-Nonce',   'Digest-Response'



here is the full output when I run in debug mode

rad_recv: Access-Request packet from host 192.168.1.227 port 33093, id=86,
length=271
        User-Name = "johnson at 192.168.1.227"
        Digest-Attributes = 0x0a096a6f686e736f6e
        Digest-Attributes = 0x010f3139322e3136382e312e323237
        Digest-Attributes =
0x022a34383166353136663737396231653364366365313331653738656462346265393931356634386439
        Digest-Attributes = 0x04137369703a3139322e3136382e312e323237
        Digest-Attributes = 0x030a5245474953544552
        Digest-Response = "b8f4759b0c4462aaa56edd1794da872a"
        Service-Type = Sip-Session
        Sip-Uri-User = "johnson"
        Cisco-AVPair = "call-id=
bf4f8d7607dc4f4aa0e7aacff499141c at 192.168.1.193"
        NAS-IP-Address = 127.0.0.1
        NAS-Port = 5060
+- entering group authorize
++[preprocess] returns ok
perl_pool: item 0x89260f0 asigned new request. Handled so far: 1
found interpetator at address 0x89260f0
rlm_perl: ###############################################################
rlm_perl: RAD_REQUEST: Digest-Response = b8f4759b0c4462aaa56edd1794da872a
rlm_perl: RAD_REQUEST: Service-Type = Sip-Session
rlm_perl: RAD_REQUEST: Cisco-AVPair = call-id=
bf4f8d7607dc4f4aa0e7aacff499141c at 192.168.1.193
rlm_perl: RAD_REQUEST: User-Name = johnson at 192.168.1.227
rlm_perl: RAD_REQUEST: Sip-Uri-User = johnson
rlm_perl: RAD_REQUEST: NAS-IP-Address = 127.0.0.1
rlm_perl: RAD_REQUEST: NAS-Port = 5060
rlm_perl: RAD_REQUEST: Digest-Attributes = ARRAY(0x89dd638)
rlm_perl: ###############################################################
rlm_perl: Added pair Digest-Response = b8f4759b0c4462aaa56edd1794da872a
rlm_perl: Added pair Service-Type = Sip-Session
rlm_perl: Added pair Cisco-AVPair = call-id=
bf4f8d7607dc4f4aa0e7aacff499141c at 192.168.1.193
rlm_perl: Added pair User-Name = johnson at 192.168.1.227
rlm_perl: Added pair Sip-Uri-User = johnson
rlm_perl: Added pair NAS-IP-Address = 127.0.0.1
rlm_perl: Added pair NAS-Port = 5060
rlm_perl: Added pair Digest-Attributes = 0x0a096a6f686e736f6e
rlm_perl: Added pair Digest-Attributes = 0x010f3139322e3136382e312e323237
rlm_perl: Added pair Digest-Attributes =
0x022a34383166353136663737396231653364366365313331653738656462346265393931356634386439
rlm_perl: Added pair Digest-Attributes =
0x04137369703a3139322e3136382e312e323237
rlm_perl: Added pair Digest-Attributes = 0x030a5245474953544552
rlm_perl: Added pair Reply-Message = Incorrect Password
perl_pool total/active/spare [32/0/32]
Unreserve perl at address 0x89260f0
++[perl] returns reject
Invalid user: [johnson at 192.168.1.227/<no User-Password attribute>] (from
client 192.168.1.227 port 5060)
  Found Post-Auth-Type Reject
+- entering group REJECT
        expand: %{User-Name} -> johnson at 192.168.1.227
 attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 2 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.227 port 33094, id=87,
length=271
        User-Name = "johnson at 192.168.1.227"
        Digest-Attributes = 0x0a096a6f686e736f6e
        Digest-Attributes = 0x010f3139322e3136382e312e323237
        Digest-Attributes =
0x022a34383166353136663737396231653364366365313331653738656462346265393931356634386439
        Digest-Attributes = 0x04137369703a3139322e3136382e312e323237
        Digest-Attributes = 0x030a5245474953544552
        Digest-Response = "b8f4759b0c4462aaa56edd1794da872a"
        Service-Type = Sip-Session
        Sip-Uri-User = "johnson"
        Cisco-AVPair = "call-id=
bf4f8d7607dc4f4aa0e7aacff499141c at 192.168.1.193"
        NAS-IP-Address = 127.0.0.1
        NAS-Port = 5060
+- entering group authorize
++[preprocess] returns ok
perl_pool: item 0x8a20548 asigned new request. Handled so far: 1
found interpetator at address 0x8a20548
rlm_perl: ###############################################################
rlm_perl: RAD_REQUEST: Digest-Response = b8f4759b0c4462aaa56edd1794da872a
rlm_perl: RAD_REQUEST: Service-Type = Sip-Session
rlm_perl: RAD_REQUEST: Cisco-AVPair = call-id=
bf4f8d7607dc4f4aa0e7aacff499141c at 192.168.1.193
rlm_perl: RAD_REQUEST: User-Name = johnson at 192.168.1.227
rlm_perl: RAD_REQUEST: Sip-Uri-User = johnson
rlm_perl: RAD_REQUEST: NAS-IP-Address = 127.0.0.1
rlm_perl: RAD_REQUEST: NAS-Port = 5060
rlm_perl: RAD_REQUEST: Digest-Attributes = ARRAY(0x8ab7bd0)
rlm_perl: ###############################################################
rlm_perl: Added pair Digest-Response = b8f4759b0c4462aaa56edd1794da872a
rlm_perl: Added pair Service-Type = Sip-Session
rlm_perl: Added pair Cisco-AVPair = call-id=
bf4f8d7607dc4f4aa0e7aacff499141c at 192.168.1.193
rlm_perl: Added pair User-Name = johnson at 192.168.1.227
rlm_perl: Added pair Sip-Uri-User = johnson
rlm_perl: Added pair NAS-IP-Address = 127.0.0.1
rlm_perl: Added pair NAS-Port = 5060
rlm_perl: Added pair Digest-Attributes = 0x0a096a6f686e736f6e
rlm_perl: Added pair Digest-Attributes = 0x010f3139322e3136382e312e323237
rlm_perl: Added pair Digest-Attributes =
0x022a34383166353136663737396231653364366365313331653738656462346265393931356634386439
rlm_perl: Added pair Digest-Attributes =
0x04137369703a3139322e3136382e312e323237
rlm_perl: Added pair Digest-Attributes = 0x030a5245474953544552
rlm_perl: Added pair Reply-Message = Incorrect Password
perl_pool total/active/spare [32/0/32]
Unreserve perl at address 0x8a20548
++[perl] returns reject
Invalid user: [johnson at 192.168.1.227/<no User-Password attribute>] (from
client 192.168.1.227 port 5060)
  Found Post-Auth-Type Reject
+- entering group REJECT
        expand: %{User-Name} -> johnson at 192.168.1.227
 attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 3 for 1 seconds
Going to the next request
Waking up in 0.4 seconds.
Sending delayed reject for request 2
Sending Access-Reject of id 86 to 192.168.1.227 port 33093
        Reply-Message = "Incorrect Password"
Waking up in 0.4 seconds.
Sending delayed reject for request 3
Sending Access-Reject of id 87 to 192.168.1.227 port 33094
        Reply-Message = "Incorrect Password"
Waking up in 4.5 seconds.
Cleaning up request 2 ID 86 with timestamp +9
Waking up in 0.4 seconds.
Cleaning up request 3 ID 87 with timestamp +10
Ready to process requests.


Thanks and Regards
Elangbam Johnson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20080506/8c7edb8a/attachment.html>