proxy.conf problem: username send with suffix
Hans Bornemann
hans.bornemann at uni-dortmund.de
Tue May 20 13:57:17 CEST 2008
Hi,
what is wrong in this configuration:
# A standard realm entry. A request from "user at company.com" will be
# sent to radius.company.com as "user", unless the 'nostrip'
# configuration item is specified. If the 'nostrip' configuration
# item is specified, then the request will be proxied as
# "user at company.com"
#
realm tu-dortmund.de {
type = radius
authhost = LOCAL
accthost = LOCAL
}
but freeradius takes username at tu-dortmund.de to check against radcheck.
debug output:
rad_recv: Access-Request packet from host 129.217.169.191:32769, id=14,
length=280
User-Name = "mhanborn at tu-dortmund.de"
Calling-Station-Id = "00-19-D2-CF-E5-50"
Called-Station-Id = "00-0B-85-60-39-10:ITMC-WPA2"
NAS-Port = 29
NAS-IP-Address = 129.217.157.246
NAS-Identifier = "mh-wlc4"
Airespace-Wlan-Id = 5
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
Tunnel-Type:0 = VLAN
Tunnel-Medium-Type:0 = IEEE-802
Tunnel-Private-Group-Id:0 = "3503"
EAP-Message =
0x0210005019800000004616030100410100003d03014832b93a0818b6073bdbd9b486630753af0d0f2e0469e2b071963d5240815fae00001600040005000a000900640062000300060013001200630100
State = 0x622cbb3df28c136e779e7cacb89d1a8d
Message-Authenticator = 0xc969e31716dd9b76025be36ae5e396e4
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 81
modcall[authorize]: module "preprocess" returns ok for request 81
modcall[authorize]: module "chap" returns noop for request 81
modcall[authorize]: module "mschap" returns noop for request 81
rlm_realm: Looking up realm "tu-dortmund.de" for User-Name =
"mhanborn at tu-dortmund.de"
rlm_realm: Found realm "tu-dortmund.de"
rlm_realm: Adding Stripped-User-Name = "mhanborn"
rlm_realm: Proxying request from user mhanborn to realm
tu-dortmund.de
rlm_realm: Adding Realm = "tu-dortmund.de"
rlm_realm: Authentication realm is LOCAL.
modcall[authorize]: module "suffix" returns noop for request 81
rlm_eap: EAP packet type response id 16 length 80
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 81
radius_xlat: 'mhanborn at tu-dortmund.de'
rlm_sql (sql): sql_set_user escaped user --> 'mhanborn at tu-dortmund.de'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM
radcheck WHERE Username = 'mhanborn at tu-dortmund.de'
ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 2
rlm_sql (sql): User mhanborn at tu-dortmund.de not found in radcheck
radius_xlat: 'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'mhanborn at tu-dortmund.de' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat: 'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'mhanborn at tu-dortmund.de' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): User mhanborn at tu-dortmund.de not found in radgroupcheck
Thanks
Hans
--
Hans Bornemann
Universitaet Dortmund - ITMC
Tel. ++49 231 755 2132 Fax. ++49 231 755 2731
More information about the Freeradius-Users
mailing list