Compiling git-2.1.1 on debian
Alexandre Chapellon
alexandre.chapellon at mana.pf
Thu Nov 6 18:53:05 CET 2008
Weired because it has been corrected for weeks in the git repository.
maybe you should just update your git tree.
Le 06.11.2008 01:32, rgreiner a écrit :
> Thanks for the tip, but in the mean time I found out why the default
> 2.1.1 package did not compile.
>
> In the debian/patches/01-radiusd-to-freeradius.dpatch file, on line 38,
> the following line:
>
> -pidfile = ${run_dir}/radiusd.pid
>
> Must be changed to
>
> -pidfile = ${run_dir}/${name}.pid
>
> Doing that, the standard 2.1.1 package compiles fine.
>
> Thank you for your help,
>
> Roberto
>
> Alexandre Chapellon wrote:
>
>> try compiling using bundled libtools
>> remove "--with-system-libtool" from debian/rules
>> then relaunch dpkg-builpackages
>>
>> Le 05.11.2008 09:53, rgreiner a écrit :
>>
>>
>>> Hi,
>>>
>>> I'm trying to compile 2.1.1 on debian using the git version (the
>>> standard package stops at the beginning due to the problem with the
>>> patches for debian), and in the middle of the checking part it stopped
>>> with a message about "INSTALL_LTDL"not being definded (full output
>>> below). Could someone please give me a help? A quick googling didn't
>>> come up with anyting useable....
>>>
>>> Thanks,
>>>
>>> Roberto
>>>
>>> dpkg-buildpackage: source package is freeradius
>>> dpkg-buildpackage: source version is 2.1.1-0
>>> dpkg-buildpackage: source changed by Alan DeKok <aland at freeradius.org>
>>> dpkg-buildpackage: host architecture i386
>>> dpkg-buildpackage: source version without epoch 2.1.1-0
>>> debian/rules clean
>>> dpatch deapply-all
>>> 02-dialupadmin-help not applied to ./ .
>>> 01-radiusd-to-freeradius not applied to ./ .
>>> rm -rf patch-stamp patch-stampT debian/patched
>>> dh_testdir
>>> dh_clean
>>> rm -f build-arch-stamp build-indep-stamp libltdl/stamp-h1
>>> rm -f install-arch-stamp install-indep-stamp configure-stamp
>>> [ -f Make.inc ] && make distclean || true
>>> # The make clean forgets to remove this build directory
>>> [ -d src/modules/lib ] && rm -fr src/modules/lib || true
>>> # Put the original autotools files back in place
>>> [ -f config.sub.dist ] && rm config.sub && mv config.sub.dist config.sub
>>> || true
>>> [ -f config.guess.dist ] && rm config.guess && mv config.guess.dist
>>> config.guess || true
>>> debian/rules build
>>> test -d debian/patched || install -d debian/patched
>>> dpatch apply-all
>>> applying patch 01-radiusd-to-freeradius to ./ ... ok.
>>> applying patch 02-dialupadmin-help to ./ ... ok.
>>> dpatch cat-all >>patch-stampT
>>> mv -f patch-stampT patch-stamp
>>> dh_testdir
>>> # Update the autotools files if necessary
>>> # Force Build-Depends on autotools-dev for /usr/share/misc/config.*
>>> if [ -e config.sub.dist ]; then rm config.sub; else mv config.sub
>>> config.sub.dist; fi
>>> if [ -e config.guess.dist ]; then rm config.guess; else mv config.guess
>>> config.guess.dist; fi
>>> ln -s /usr/share/misc/config.sub config.sub
>>> ln -s /usr/share/misc/config.guess config.guess
>>> ./configure \
>>> --build i486-linux-gnu \
>>> --config-cache \
>>> --prefix=/usr \
>>> --exec-prefix=/usr \
>>> --mandir=/usr/share/man \
>>> --sysconfdir=/etc \
>>> --libdir=/usr/lib/freeradius \
>>> --datadir=/usr/share \
>>> --localstatedir=/var \
>>> --with-raddbdir=/etc/freeradius \
>>> --with-logdir=/var/log/freeradius \
>>> --with-system-libtool --disable-ltdl-install \
>>> --with-large-files --with-udpfromto --with-edir \
>>> --enable-developer \
>>> --with-rlm-sql-postgresql-lib-dir=`pg_config --libdir` \
>>> --with-rlm-sql-postgresql-include-dir=`pg_config
>>> --includedir`
>>> configure: creating cache config.cache
>>> checking for gcc... gcc
>>> checking for C compiler default output file name... a.out
>>> checking whether the C compiler works... yes
>>> checking whether we are cross compiling... no
>>> checking for suffix of executables...
>>> checking for suffix of object files... o
>>> checking whether we are using the GNU C compiler... yes
>>> checking whether gcc accepts -g... yes
>>> checking for gcc option to accept ISO C89... none needed
>>> checking for g++... no
>>> checking for c++... no
>>> checking for gpp... no
>>> checking for aCC... no
>>> checking for CC... no
>>> checking for cxx... no
>>> checking for cc++... no
>>> checking for cl.exe... no
>>> checking for FCC... no
>>> checking for KCC... no
>>> checking for RCC... no
>>> checking for xlC_r... no
>>> checking for xlC... no
>>> checking whether we are using the GNU C++ compiler... no
>>> checking whether g++ accepts -g... no
>>> checking how to run the C preprocessor... gcc -E
>>> checking for grep that handles long lines and -e... /bin/grep
>>> checking for egrep... /bin/grep -E
>>> checking for AIX... no
>>> checking whether gcc needs -traditional... no
>>> checking whether we are using SUNPro C... no
>>> checking for special C compiler options needed for large files... no
>>> checking for _FILE_OFFSET_BITS value needed for large files... 64
>>> checking for ANSI C header files... yes
>>> checking for sys/types.h... yes
>>> checking for sys/stat.h... yes
>>> checking for stdlib.h... yes
>>> checking for string.h... yes
>>> checking for memory.h... yes
>>> checking for strings.h... yes
>>> checking for inttypes.h... yes
>>> checking for stdint.h... yes
>>> checking for unistd.h... yes
>>> checking whether byte ordering is bigendian... no
>>> checking for gmake... no
>>> checking for make... /usr/bin/make
>>> checking for lt_dlinit in -lltdl... yes
>>> configure: WARNING: not overwriting libltdl at /usr, force with
>>> `--enable-ltdl-install'
>>> checking build system type... i486-pc-linux-gnu
>>> checking host system type... i486-pc-linux-gnu
>>> checking for a sed that does not truncate output... /bin/sed
>>> checking for fgrep... /bin/grep -F
>>> checking for ld used by gcc... /usr/bin/ld
>>> checking if the linker (/usr/bin/ld) is GNU ld... yes
>>> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
>>> checking the name lister (/usr/bin/nm -B) interface... BSD nm
>>> checking whether ln -s works... yes
>>> checking the maximum length of command line arguments... 98304
>>> checking whether the shell understands some XSI constructs... yes
>>> checking whether the shell understands "+="... yes
>>> checking for /usr/bin/ld option to reload object files... -r
>>> checking how to recognize dependent libraries... pass_all
>>> checking for ar... ar
>>> checking for strip... strip
>>> checking for ranlib... ranlib
>>> checking command to parse /usr/bin/nm -B output from gcc object... ok
>>> checking for dlfcn.h... yes
>>> checking whether we are using the GNU C++ compiler... (cached) no
>>> checking whether g++ accepts -g... (cached) no
>>> checking which extension is used for runtime loadable modules...
>>> checking which variable specifies run-time module search path...
>>> checking for the default library search path...
>>> checking for library containing dlopen... -ldl
>>> checking for dlerror... yes
>>> checking for shl_load... no
>>> checking for shl_load in -ldld... no
>>> checking for dld_link in -ldld... no
>>> checking for _ prefix in compiled symbols... no
>>> checking whether deplibs are loaded by dlopen... yes
>>> checking for argz.h... yes
>>> checking for error_t... yes
>>> checking for argz_add... yes
>>> checking for argz_append... yes
>>> checking for argz_count... yes
>>> checking for argz_create_sep... yes
>>> checking for argz_insert... yes
>>> checking for argz_next... yes
>>> checking for argz_stringify... yes
>>> checking if argz actually works... yes
>>> checking whether libtool supports -dlopen/-dlpreopen... yes
>>> checking for libtool... /usr/bin/libtool
>>> checking docdir... ${datadir}/doc/freeradius
>>> checking logdir... /var/log/freeradius
>>> checking radacctdir... ${logdir}/radacct
>>> checking raddbdir... /etc/freeradius
>>> checking for perl... /usr/bin/perl
>>> checking for snmpget... /usr/bin/snmpget
>>> checking for snmpwalk... /usr/bin/snmpwalk
>>> checking for rusers... /usr/bin/rusers
>>> checking for locate... /usr/bin/locate
>>> checking for dirname... /usr/bin/dirname
>>> checking for grep... (cached) /bin/grep
>>> checking pthread.h usability... yes
>>> checking pthread.h presence... yes
>>> checking for pthread.h... yes
>>> checking for pthread_create in -lpthread... yes
>>> checking for library containing sem_init... none required
>>> checking for getsockname in -lsocket... no
>>> checking for inet_aton in -lresolv... yes
>>> checking for inet_ntoa in -lnsl... yes
>>> checking for DH_new in -lcrypto... yes
>>> checking for SSL_new in -lssl... yes
>>> checking for htonl in -lws2_32... no
>>> checking for pcap_open_live in -lpcap... yes
>>> checking for a readline compatible library... no
>>> checking for dirent.h that defines DIR... yes
>>> checking for library containing opendir... none required
>>> checking for ANSI C header files... (cached) yes
>>> checking whether time.h and sys/time.h may both be included... yes
>>> checking for sys/wait.h that is POSIX.1 compatible... yes
>>> checking for unistd.h... (cached) yes
>>> checking crypt.h usability... yes
>>> checking crypt.h presence... yes
>>> checking for crypt.h... yes
>>> checking errno.h usability... yes
>>> checking errno.h presence... yes
>>> checking for errno.h... yes
>>> checking resource.h usability... no
>>> checking resource.h presence... no
>>> checking for resource.h... no
>>> checking sys/resource.h usability... yes
>>> checking sys/resource.h presence... yes
>>> checking for sys/resource.h... yes
>>> checking getopt.h usability... yes
>>> checking getopt.h presence... yes
>>> checking for getopt.h... yes
>>> checking malloc.h usability... yes
>>> checking malloc.h presence... yes
>>> checking for malloc.h... yes
>>> checking utmp.h usability... yes
>>> checking utmp.h presence... yes
>>> checking for utmp.h... yes
>>> checking utmpx.h usability... yes
>>> checking utmpx.h presence... yes
>>> checking for utmpx.h... yes
>>> checking signal.h usability... yes
>>> checking signal.h presence... yes
>>> checking for signal.h... yes
>>> checking sys/select.h usability... yes
>>> checking sys/select.h presence... yes
>>> checking for sys/select.h... yes
>>> checking syslog.h usability... yes
>>> checking syslog.h presence... yes
>>> checking for syslog.h... yes
>>> checking for inttypes.h... (cached) yes
>>> checking for stdint.h... (cached) yes
>>> checking stdio.h usability... yes
>>> checking stdio.h presence... yes
>>> checking for stdio.h... yes
>>> checking netdb.h usability... yes
>>> checking netdb.h presence... yes
>>> checking for netdb.h... yes
>>> checking semaphore.h usability... yes
>>> checking semaphore.h presence... yes
>>> checking for semaphore.h... yes
>>> checking arpa/inet.h usability... yes
>>> checking arpa/inet.h presence... yes
>>> checking for arpa/inet.h... yes
>>> checking netinet/in.h usability... yes
>>> checking netinet/in.h presence... yes
>>> checking for netinet/in.h... yes
>>> checking for sys/types.h... (cached) yes
>>> checking sys/socket.h usability... yes
>>> checking sys/socket.h presence... yes
>>> checking for sys/socket.h... yes
>>> checking winsock.h usability... no
>>> checking winsock.h presence... no
>>> checking for winsock.h... no
>>> checking sys/time.h usability... yes
>>> checking sys/time.h presence... yes
>>> checking for sys/time.h... yes
>>> checking for sys/wait.h... (cached) yes
>>> checking sys/security.h usability... no
>>> checking sys/security.h presence... no
>>> checking for sys/security.h... no
>>> checking fcntl.h usability... yes
>>> checking fcntl.h presence... yes
>>> checking for fcntl.h... yes
>>> checking sys/fcntl.h usability... yes
>>> checking sys/fcntl.h presence... yes
>>> checking for sys/fcntl.h... yes
>>> checking sys/prctl.h usability... yes
>>> checking sys/prctl.h presence... yes
>>> checking for sys/prctl.h... yes
>>> checking sys/un.h usability... yes
>>> checking sys/un.h presence... yes
>>> checking for sys/un.h... yes
>>> checking glob.h usability... yes
>>> checking glob.h presence... yes
>>> checking for glob.h... yes
>>> checking prot.h usability... no
>>> checking prot.h presence... no
>>> checking for prot.h... no
>>> checking pwd.h usability... yes
>>> checking pwd.h presence... yes
>>> checking for pwd.h... yes
>>> checking grp.h usability... yes
>>> checking grp.h presence... yes
>>> checking for grp.h... yes
>>> checking sia.h usability... no
>>> checking sia.h presence... no
>>> checking for sia.h... no
>>> checking siad.h usability... no
>>> checking siad.h presence... no
>>> checking for siad.h... no
>>> checking for net/if.h... yes
>>> checking regex.h usability... yes
>>> checking regex.h presence... yes
>>> checking for regex.h... yes
>>> checking openssl/ssl.h usability... yes
>>> checking openssl/ssl.h presence... yes
>>> checking for openssl/ssl.h... yes
>>> checking openssl/crypto.h usability... yes
>>> checking openssl/crypto.h presence... yes
>>> checking for openssl/crypto.h... yes
>>> checking openssl/err.h usability... yes
>>> checking openssl/err.h presence... yes
>>> checking for openssl/err.h... yes
>>> checking openssl/evp.h usability... yes
>>> checking openssl/evp.h presence... yes
>>> checking for openssl/evp.h... yes
>>> checking openssl/engine.h usability... yes
>>> checking openssl/engine.h presence... yes
>>> checking for openssl/engine.h... yes
>>> checking for OpenSSL version >= 0.9.7... yes
>>> checking pcap.h usability... yes
>>> checking pcap.h presence... yes
>>> checking for pcap.h... yes
>>> checking for off_t... yes
>>> checking for pid_t... yes
>>> checking for size_t... yes
>>> checking for uid_t in sys/types.h... yes
>>> checking for socklen_t... yes
>>> checking for uint8_t... yes
>>> checking for uint16_t... yes
>>> checking for uint32_t... yes
>>> checking for struct in6_addr... yes
>>> checking for struct sockaddr_storage... yes
>>> checking for struct sockaddr_in6... yes
>>> checking for struct addrinfo... yes
>>> checking for getopt_long... yes
>>> checking for lockf... yes
>>> checking for strsignal... yes
>>> checking for sigaction... yes
>>> checking for sigprocmask... yes
>>> checking for pthread_sigmask... yes
>>> checking for snprintf... yes
>>> checking for vsnprintf... yes
>>> checking for setsid... yes
>>> checking for strncasecmp... yes
>>> checking for strcasecmp... yes
>>> checking for localtime_r... yes
>>> checking for ctime_r... yes
>>> checking for gmtime_r... yes
>>> checking for strsep... yes
>>> checking for inet_aton... yes
>>> checking for inet_pton... yes
>>> checking for inet_ntop... yes
>>> checking for setlinebuf... yes
>>> checking for setvbuf... yes
>>> checking for getusershell... yes
>>> checking for initgroups... yes
>>> checking for getaddrinfo... yes
>>> checking for getnameinfo... yes
>>> checking for closefrom... no
>>> checking for gettimeofday... yes
>>> checking for getpeereid... no
>>> checking for strlcat... no
>>> checking for strlcpy... no
>>> checking whether crypt must be declared... no
>>> checking whether strncasecmp must be declared... no
>>> checking whether strcasecmp must be declared... no
>>> checking whether inet_aton must be declared... no
>>> checking whether setlinebuf must be declared... no
>>> checking whether getusershell must be declared... no
>>> checking whether endusershell must be declared... no
>>> checking return type of signal handlers... void
>>> checking for ut_xtime in struct utmpx... no
>>> checking for ipi_addr in struct in_pktinfo... yes
>>> checking for ipi6_addr in struct in6_pktinfo... yes
>>> checking for an ANSI C-conforming const... yes
>>> checking type of OS... Linux
>>> checking for developer gcc flags... yes. Using -g -Wshadow
>>> -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings
>>> -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations
>>> -Wnested-externs -W -Wredundant-decls -Wundef
>>> checking for TLS... yes
>>> checking for crypt in -lcrypt... yes
>>> checking for setkey in -lcipher... no
>>> checking gethostbyaddr_r() syntax... GNU-style
>>> checking gethostbyname_r() syntax... GNU-style
>>> checking ctime_r() syntax... POSIX-style
>>> top_builddir=/root/radiusd
>>> configure: updating cache config.cache
>>> configure: error: conditional "INSTALL_LTDL" was never defined.
>>> Usually this means the macro was only invoked conditionally.
>>> make: *** [configure-stamp] Error 1
>>>
>>>
>>>
>>>
>>>
>> -
>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>
>>
>>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20081106/7156841d/attachment.html>
More information about the Freeradius-Users
mailing list