Compiling git-2.1.1 on debian
rgreiner
mrgreiner at gmail.com
Thu Nov 6 19:18:05 CET 2008
Yes,
the version in git does have this correction. With default 2.1.1, I
meant the 2.1.1 version in the ftp/http.
Roberto
Alexandre Chapellon wrote:
> Weired because it has been corrected for weeks in the git repository.
> maybe you should just update your git tree.
>
>
> Le 06.11.2008 01:32, rgreiner a écrit :
>> Thanks for the tip, but in the mean time I found out why the default
>> 2.1.1 package did not compile.
>>
>> In the debian/patches/01-radiusd-to-freeradius.dpatch file, on line 38,
>> the following line:
>>
>> -pidfile = ${run_dir}/radiusd.pid
>>
>> Must be changed to
>>
>> -pidfile = ${run_dir}/${name}.pid
>>
>> Doing that, the standard 2.1.1 package compiles fine.
>>
>> Thank you for your help,
>>
>> Roberto
>>
>> Alexandre Chapellon wrote:
>>
>>> try compiling using bundled libtools
>>> remove "--with-system-libtool" from debian/rules
>>> then relaunch dpkg-builpackages
>>>
>>> Le 05.11.2008 09:53, rgreiner a écrit :
>>>
>>>
>>>> Hi,
>>>>
>>>> I'm trying to compile 2.1.1 on debian using the git version (the
>>>> standard package stops at the beginning due to the problem with the
>>>> patches for debian), and in the middle of the checking part it stopped
>>>> with a message about "INSTALL_LTDL"not being definded (full output
>>>> below). Could someone please give me a help? A quick googling didn't
>>>> come up with anyting useable....
>>>>
>>>> Thanks,
>>>>
>>>> Roberto
>>>>
>>>> dpkg-buildpackage: source package is freeradius
>>>> dpkg-buildpackage: source version is 2.1.1-0
>>>> dpkg-buildpackage: source changed by Alan DeKok <aland at freeradius.org>
>>>> dpkg-buildpackage: host architecture i386
>>>> dpkg-buildpackage: source version without epoch 2.1.1-0
>>>> debian/rules clean
>>>> dpatch deapply-all
>>>> 02-dialupadmin-help not applied to ./ .
>>>> 01-radiusd-to-freeradius not applied to ./ .
>>>> rm -rf patch-stamp patch-stampT debian/patched
>>>> dh_testdir
>>>> dh_clean
>>>> rm -f build-arch-stamp build-indep-stamp libltdl/stamp-h1
>>>> rm -f install-arch-stamp install-indep-stamp configure-stamp
>>>> [ -f Make.inc ] && make distclean || true
>>>> # The make clean forgets to remove this build directory
>>>> [ -d src/modules/lib ] && rm -fr src/modules/lib || true
>>>> # Put the original autotools files back in place
>>>> [ -f config.sub.dist ] && rm config.sub && mv config.sub.dist config.sub
>>>> || true
>>>> [ -f config.guess.dist ] && rm config.guess && mv config.guess.dist
>>>> config.guess || true
>>>> debian/rules build
>>>> test -d debian/patched || install -d debian/patched
>>>> dpatch apply-all
>>>> applying patch 01-radiusd-to-freeradius to ./ ... ok.
>>>> applying patch 02-dialupadmin-help to ./ ... ok.
>>>> dpatch cat-all >>patch-stampT
>>>> mv -f patch-stampT patch-stamp
>>>> dh_testdir
>>>> # Update the autotools files if necessary
>>>> # Force Build-Depends on autotools-dev for /usr/share/misc/config.*
>>>> if [ -e config.sub.dist ]; then rm config.sub; else mv config.sub
>>>> config.sub.dist; fi
>>>> if [ -e config.guess.dist ]; then rm config.guess; else mv config.guess
>>>> config.guess.dist; fi
>>>> ln -s /usr/share/misc/config.sub config.sub
>>>> ln -s /usr/share/misc/config.guess config.guess
>>>> ./configure \
>>>> --build i486-linux-gnu \
>>>> --config-cache \
>>>> --prefix=/usr \
>>>> --exec-prefix=/usr \
>>>> --mandir=/usr/share/man \
>>>> --sysconfdir=/etc \
>>>> --libdir=/usr/lib/freeradius \
>>>> --datadir=/usr/share \
>>>> --localstatedir=/var \
>>>> --with-raddbdir=/etc/freeradius \
>>>> --with-logdir=/var/log/freeradius \
>>>> --with-system-libtool --disable-ltdl-install \
>>>> --with-large-files --with-udpfromto --with-edir \
>>>> --enable-developer \
>>>> --with-rlm-sql-postgresql-lib-dir=`pg_config --libdir` \
>>>> --with-rlm-sql-postgresql-include-dir=`pg_config
>>>> --includedir`
>>>> configure: creating cache config.cache
>>>> checking for gcc... gcc
>>>> checking for C compiler default output file name... a.out
>>>> checking whether the C compiler works... yes
>>>> checking whether we are cross compiling... no
>>>> checking for suffix of executables...
>>>> checking for suffix of object files... o
>>>> checking whether we are using the GNU C compiler... yes
>>>> checking whether gcc accepts -g... yes
>>>> checking for gcc option to accept ISO C89... none needed
>>>> checking for g++... no
>>>> checking for c++... no
>>>> checking for gpp... no
>>>> checking for aCC... no
>>>> checking for CC... no
>>>> checking for cxx... no
>>>> checking for cc++... no
>>>> checking for cl.exe... no
>>>> checking for FCC... no
>>>> checking for KCC... no
>>>> checking for RCC... no
>>>> checking for xlC_r... no
>>>> checking for xlC... no
>>>> checking whether we are using the GNU C++ compiler... no
>>>> checking whether g++ accepts -g... no
>>>> checking how to run the C preprocessor... gcc -E
>>>> checking for grep that handles long lines and -e... /bin/grep
>>>> checking for egrep... /bin/grep -E
>>>> checking for AIX... no
>>>> checking whether gcc needs -traditional... no
>>>> checking whether we are using SUNPro C... no
>>>> checking for special C compiler options needed for large files... no
>>>> checking for _FILE_OFFSET_BITS value needed for large files... 64
>>>> checking for ANSI C header files... yes
>>>> checking for sys/types.h... yes
>>>> checking for sys/stat.h... yes
>>>> checking for stdlib.h... yes
>>>> checking for string.h... yes
>>>> checking for memory.h... yes
>>>> checking for strings.h... yes
>>>> checking for inttypes.h... yes
>>>> checking for stdint.h... yes
>>>> checking for unistd.h... yes
>>>> checking whether byte ordering is bigendian... no
>>>> checking for gmake... no
>>>> checking for make... /usr/bin/make
>>>> checking for lt_dlinit in -lltdl... yes
>>>> configure: WARNING: not overwriting libltdl at /usr, force with
>>>> `--enable-ltdl-install'
>>>> checking build system type... i486-pc-linux-gnu
>>>> checking host system type... i486-pc-linux-gnu
>>>> checking for a sed that does not truncate output... /bin/sed
>>>> checking for fgrep... /bin/grep -F
>>>> checking for ld used by gcc... /usr/bin/ld
>>>> checking if the linker (/usr/bin/ld) is GNU ld... yes
>>>> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
>>>> checking the name lister (/usr/bin/nm -B) interface... BSD nm
>>>> checking whether ln -s works... yes
>>>> checking the maximum length of command line arguments... 98304
>>>> checking whether the shell understands some XSI constructs... yes
>>>> checking whether the shell understands "+="... yes
>>>> checking for /usr/bin/ld option to reload object files... -r
>>>> checking how to recognize dependent libraries... pass_all
>>>> checking for ar... ar
>>>> checking for strip... strip
>>>> checking for ranlib... ranlib
>>>> checking command to parse /usr/bin/nm -B output from gcc object... ok
>>>> checking for dlfcn.h... yes
>>>> checking whether we are using the GNU C++ compiler... (cached) no
>>>> checking whether g++ accepts -g... (cached) no
>>>> checking which extension is used for runtime loadable modules...
>>>> checking which variable specifies run-time module search path...
>>>> checking for the default library search path...
>>>> checking for library containing dlopen... -ldl
>>>> checking for dlerror... yes
>>>> checking for shl_load... no
>>>> checking for shl_load in -ldld... no
>>>> checking for dld_link in -ldld... no
>>>> checking for _ prefix in compiled symbols... no
>>>> checking whether deplibs are loaded by dlopen... yes
>>>> checking for argz.h... yes
>>>> checking for error_t... yes
>>>> checking for argz_add... yes
>>>> checking for argz_append... yes
>>>> checking for argz_count... yes
>>>> checking for argz_create_sep... yes
>>>> checking for argz_insert... yes
>>>> checking for argz_next... yes
>>>> checking for argz_stringify... yes
>>>> checking if argz actually works... yes
>>>> checking whether libtool supports -dlopen/-dlpreopen... yes
>>>> checking for libtool... /usr/bin/libtool
>>>> checking docdir... ${datadir}/doc/freeradius
>>>> checking logdir... /var/log/freeradius
>>>> checking radacctdir... ${logdir}/radacct
>>>> checking raddbdir... /etc/freeradius
>>>> checking for perl... /usr/bin/perl
>>>> checking for snmpget... /usr/bin/snmpget
>>>> checking for snmpwalk... /usr/bin/snmpwalk
>>>> checking for rusers... /usr/bin/rusers
>>>> checking for locate... /usr/bin/locate
>>>> checking for dirname... /usr/bin/dirname
>>>> checking for grep... (cached) /bin/grep
>>>> checking pthread.h usability... yes
>>>> checking pthread.h presence... yes
>>>> checking for pthread.h... yes
>>>> checking for pthread_create in -lpthread... yes
>>>> checking for library containing sem_init... none required
>>>> checking for getsockname in -lsocket... no
>>>> checking for inet_aton in -lresolv... yes
>>>> checking for inet_ntoa in -lnsl... yes
>>>> checking for DH_new in -lcrypto... yes
>>>> checking for SSL_new in -lssl... yes
>>>> checking for htonl in -lws2_32... no
>>>> checking for pcap_open_live in -lpcap... yes
>>>> checking for a readline compatible library... no
>>>> checking for dirent.h that defines DIR... yes
>>>> checking for library containing opendir... none required
>>>> checking for ANSI C header files... (cached) yes
>>>> checking whether time.h and sys/time.h may both be included... yes
>>>> checking for sys/wait.h that is POSIX.1 compatible... yes
>>>> checking for unistd.h... (cached) yes
>>>> checking crypt.h usability... yes
>>>> checking crypt.h presence... yes
>>>> checking for crypt.h... yes
>>>> checking errno.h usability... yes
>>>> checking errno.h presence... yes
>>>> checking for errno.h... yes
>>>> checking resource.h usability... no
>>>> checking resource.h presence... no
>>>> checking for resource.h... no
>>>> checking sys/resource.h usability... yes
>>>> checking sys/resource.h presence... yes
>>>> checking for sys/resource.h... yes
>>>> checking getopt.h usability... yes
>>>> checking getopt.h presence... yes
>>>> checking for getopt.h... yes
>>>> checking malloc.h usability... yes
>>>> checking malloc.h presence... yes
>>>> checking for malloc.h... yes
>>>> checking utmp.h usability... yes
>>>> checking utmp.h presence... yes
>>>> checking for utmp.h... yes
>>>> checking utmpx.h usability... yes
>>>> checking utmpx.h presence... yes
>>>> checking for utmpx.h... yes
>>>> checking signal.h usability... yes
>>>> checking signal.h presence... yes
>>>> checking for signal.h... yes
>>>> checking sys/select.h usability... yes
>>>> checking sys/select.h presence... yes
>>>> checking for sys/select.h... yes
>>>> checking syslog.h usability... yes
>>>> checking syslog.h presence... yes
>>>> checking for syslog.h... yes
>>>> checking for inttypes.h... (cached) yes
>>>> checking for stdint.h... (cached) yes
>>>> checking stdio.h usability... yes
>>>> checking stdio.h presence... yes
>>>> checking for stdio.h... yes
>>>> checking netdb.h usability... yes
>>>> checking netdb.h presence... yes
>>>> checking for netdb.h... yes
>>>> checking semaphore.h usability... yes
>>>> checking semaphore.h presence... yes
>>>> checking for semaphore.h... yes
>>>> checking arpa/inet.h usability... yes
>>>> checking arpa/inet.h presence... yes
>>>> checking for arpa/inet.h... yes
>>>> checking netinet/in.h usability... yes
>>>> checking netinet/in.h presence... yes
>>>> checking for netinet/in.h... yes
>>>> checking for sys/types.h... (cached) yes
>>>> checking sys/socket.h usability... yes
>>>> checking sys/socket.h presence... yes
>>>> checking for sys/socket.h... yes
>>>> checking winsock.h usability... no
>>>> checking winsock.h presence... no
>>>> checking for winsock.h... no
>>>> checking sys/time.h usability... yes
>>>> checking sys/time.h presence... yes
>>>> checking for sys/time.h... yes
>>>> checking for sys/wait.h... (cached) yes
>>>> checking sys/security.h usability... no
>>>> checking sys/security.h presence... no
>>>> checking for sys/security.h... no
>>>> checking fcntl.h usability... yes
>>>> checking fcntl.h presence... yes
>>>> checking for fcntl.h... yes
>>>> checking sys/fcntl.h usability... yes
>>>> checking sys/fcntl.h presence... yes
>>>> checking for sys/fcntl.h... yes
>>>> checking sys/prctl.h usability... yes
>>>> checking sys/prctl.h presence... yes
>>>> checking for sys/prctl.h... yes
>>>> checking sys/un.h usability... yes
>>>> checking sys/un.h presence... yes
>>>> checking for sys/un.h... yes
>>>> checking glob.h usability... yes
>>>> checking glob.h presence... yes
>>>> checking for glob.h... yes
>>>> checking prot.h usability... no
>>>> checking prot.h presence... no
>>>> checking for prot.h... no
>>>> checking pwd.h usability... yes
>>>> checking pwd.h presence... yes
>>>> checking for pwd.h... yes
>>>> checking grp.h usability... yes
>>>> checking grp.h presence... yes
>>>> checking for grp.h... yes
>>>> checking sia.h usability... no
>>>> checking sia.h presence... no
>>>> checking for sia.h... no
>>>> checking siad.h usability... no
>>>> checking siad.h presence... no
>>>> checking for siad.h... no
>>>> checking for net/if.h... yes
>>>> checking regex.h usability... yes
>>>> checking regex.h presence... yes
>>>> checking for regex.h... yes
>>>> checking openssl/ssl.h usability... yes
>>>> checking openssl/ssl.h presence... yes
>>>> checking for openssl/ssl.h... yes
>>>> checking openssl/crypto.h usability... yes
>>>> checking openssl/crypto.h presence... yes
>>>> checking for openssl/crypto.h... yes
>>>> checking openssl/err.h usability... yes
>>>> checking openssl/err.h presence... yes
>>>> checking for openssl/err.h... yes
>>>> checking openssl/evp.h usability... yes
>>>> checking openssl/evp.h presence... yes
>>>> checking for openssl/evp.h... yes
>>>> checking openssl/engine.h usability... yes
>>>> checking openssl/engine.h presence... yes
>>>> checking for openssl/engine.h... yes
>>>> checking for OpenSSL version >= 0.9.7... yes
>>>> checking pcap.h usability... yes
>>>> checking pcap.h presence... yes
>>>> checking for pcap.h... yes
>>>> checking for off_t... yes
>>>> checking for pid_t... yes
>>>> checking for size_t... yes
>>>> checking for uid_t in sys/types.h... yes
>>>> checking for socklen_t... yes
>>>> checking for uint8_t... yes
>>>> checking for uint16_t... yes
>>>> checking for uint32_t... yes
>>>> checking for struct in6_addr... yes
>>>> checking for struct sockaddr_storage... yes
>>>> checking for struct sockaddr_in6... yes
>>>> checking for struct addrinfo... yes
>>>> checking for getopt_long... yes
>>>> checking for lockf... yes
>>>> checking for strsignal... yes
>>>> checking for sigaction... yes
>>>> checking for sigprocmask... yes
>>>> checking for pthread_sigmask... yes
>>>> checking for snprintf... yes
>>>> checking for vsnprintf... yes
>>>> checking for setsid... yes
>>>> checking for strncasecmp... yes
>>>> checking for strcasecmp... yes
>>>> checking for localtime_r... yes
>>>> checking for ctime_r... yes
>>>> checking for gmtime_r... yes
>>>> checking for strsep... yes
>>>> checking for inet_aton... yes
>>>> checking for inet_pton... yes
>>>> checking for inet_ntop... yes
>>>> checking for setlinebuf... yes
>>>> checking for setvbuf... yes
>>>> checking for getusershell... yes
>>>> checking for initgroups... yes
>>>> checking for getaddrinfo... yes
>>>> checking for getnameinfo... yes
>>>> checking for closefrom... no
>>>> checking for gettimeofday... yes
>>>> checking for getpeereid... no
>>>> checking for strlcat... no
>>>> checking for strlcpy... no
>>>> checking whether crypt must be declared... no
>>>> checking whether strncasecmp must be declared... no
>>>> checking whether strcasecmp must be declared... no
>>>> checking whether inet_aton must be declared... no
>>>> checking whether setlinebuf must be declared... no
>>>> checking whether getusershell must be declared... no
>>>> checking whether endusershell must be declared... no
>>>> checking return type of signal handlers... void
>>>> checking for ut_xtime in struct utmpx... no
>>>> checking for ipi_addr in struct in_pktinfo... yes
>>>> checking for ipi6_addr in struct in6_pktinfo... yes
>>>> checking for an ANSI C-conforming const... yes
>>>> checking type of OS... Linux
>>>> checking for developer gcc flags... yes. Using -g -Wshadow
>>>> -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings
>>>> -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations
>>>> -Wnested-externs -W -Wredundant-decls -Wundef
>>>> checking for TLS... yes
>>>> checking for crypt in -lcrypt... yes
>>>> checking for setkey in -lcipher... no
>>>> checking gethostbyaddr_r() syntax... GNU-style
>>>> checking gethostbyname_r() syntax... GNU-style
>>>> checking ctime_r() syntax... POSIX-style
>>>> top_builddir=/root/radiusd
>>>> configure: updating cache config.cache
>>>> configure: error: conditional "INSTALL_LTDL" was never defined.
>>>> Usually this means the macro was only invoked conditionally.
>>>> make: *** [configure-stamp] Error 1
>>>>
>>>>
>>>>
>>>>
>>>>
>>> -
>>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>>
>>>
>>>
>>
>>
>>
> ------------------------------------------------------------------------
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
-----------------------------------------------------
Marcos Roberto Greiner
Os otimistas acham que estamos no melhor dos mundos
Os pessimistas tem medo de que isto seja verdade
Murphy
-----------------------------------------------------
More information about the Freeradius-Users
mailing list