NTLM_auth active directory - what is wrong?
tnt at kalik.net
tnt at kalik.net
Tue Oct 7 16:27:06 CEST 2008
Add ntlm_auth to inner-tunnel virtual server as well. Or add it to
instatiate section of radiusd.conf.
Ivan Kalik
Kalik Informatika ISP
Dana 7/10/2008, "Santiago Matiz V" <santimatiz at yahoo.com> piše:
>
>Syed thanks for your answer, when i configure the file "users" with "ntlm_auth" appears the error :
>
>"/usr/local/etc/raddb/users[230]: Parse error (check) for entry DEFAULT: Unknown value ntlm_auth for attribute Auth-Type
>Errors reading /usr/local/etc/raddb/users"
>
>thanks again...
>
>Santiago Matiz (santimatiz at yahoo.com)
>Systems Engineer
>Bogotá, Colombia (South America)
>
>
>--- On Tue, 10/7/08, Syed Anwarul Hasan <syedanwarulhasan2007 at gmail.com> wrote:
>
>> From: Syed Anwarul Hasan <syedanwarulhasan2007 at gmail.com>
>> Subject: Re: NTLM_auth active directory - what is wrong?
>> To: santimatiz at yahoo.com, "FreeRadius users mailing list" <freeradius-users at lists.freeradius.org>
>> Date: Tuesday, October 7, 2008, 2:20 PM
>> Hi Santiago,
>>
>> I would suggest you to first try with radtest to see
>> ntlm_auth BIND AS
>> USER is working or not.
>>
>> Have a User entry in Users file with Auth-Type := ntlm_auth
>> Add *ntlm_auth* in Authenticate section of default and
>> inner-tunnel files in
>> /sites-enabled directory.
>>
>> Then if radtest returns NT Success Ok or ntlm_auth is being
>> done by Server.
>> Then Try for RADIUS requests from actual NAS.
>>
>> I have done this way as of now to check ntlm_auth Bind.
>>
>> The Experts can show you more light in your problem.
>>
>> Regards,
>> SYED
>>
>>
>>
>> On Tue, Oct 7, 2008 at 2:36 PM, Santiago Matiz V
>> <santimatiz at yahoo.com>wrote:
>>
>> >
>> > Hi all
>> > I follow the instructions of Alan :
>> >
>> >
>> <http://deployingradius.com/documents/configuration/active_directory.html>
>> >
>> > to authenticate ntlm_auth with radius but appers the
>> following message:
>> >
>> > " WARNING: Unknown value specified for Auth-Type.
>> Cannot perform requested
>> > action.
>> > auth: Failed to validate the user."
>> >
>> > what is wrong?
>> >
>> > Please help.
>> > Santiago
>> >
>> >
>> > FreeRADIUS Version 2.0.5, for host i686-pc-linux-gnu,
>> built on Sep 3 2008
>> > at 15:55:02
>> > Copyright (C) 1999-2008 The FreeRADIUS server project
>> and contributors.
>> > There is NO warranty; not even for MERCHANTABILITY or
>> FITNESS FOR A
>> > PARTICULAR PURPOSE.
>> > You may redistribute copies of FreeRADIUS under the
>> terms of the
>> > GNU General Public License v2.
>> > Starting - reading configuration files ...
>> > including configuration file
>> /usr/local/etc/raddb/radiusd.conf
>> > including configuration file
>> /usr/local/etc/raddb/proxy.conf
>> > including configuration file
>> /usr/local/etc/raddb/clients.conf
>> > including configuration file
>> /usr/local/etc/raddb/snmp.conf
>> > including configuration file
>> /usr/local/etc/raddb/eap.conf
>> > including dictionary file
>> /usr/local/etc/raddb/dictionary
>> > main {
>> > prefix = "/usr/local"
>> > localstatedir = "/var"
>> > logdir = "/var/log/radius"
>> > libdir = "/usr/local/lib"
>> > radacctdir =
>> "/var/log/radius/radacct"
>> > hostname_lookups = no
>> > max_request_time = 30
>> > cleanup_delay = 5
>> > max_requests = 1024
>> > allow_core_dumps = no
>> > pidfile =
>> "/var/run/radiusd/radiusd.pid"
>> > checkrad = "/usr/local/sbin/checkrad"
>> > debug_level = 0
>> > proxy_requests = yes
>> > log_auth = yes
>> > log_auth_badpass = no
>> > log_auth_goodpass = no
>> > log_stripped_names = no
>> > }
>> > client localhost {
>> > ipaddr = 127.0.0.1
>> > require_message_authenticator = no
>> > secret = "testing123"
>> > nastype = "other"
>> > }
>> > client 192.100.16.11 {
>> > require_message_authenticator = no
>> > secret = "123"
>> > }
>> > radiusd: #### Loading Realms and Home Servers ####
>> > proxy server {
>> > retry_delay = 5
>> > retry_count = 3
>> > default_fallback = no
>> > dead_time = 120
>> > wake_all_if_all_dead = no
>> > }
>> > home_server localhost {
>> > ipaddr = 127.0.0.1
>> > port = 1812
>> > type = "auth"
>> > secret = "testing123"
>> > response_window = 20
>> > max_outstanding = 65536
>> > zombie_period = 40
>> > status_check = "status-server"
>> > ping_check = "none"
>> > ping_interval = 30
>> > check_interval = 30
>> > num_answers_to_alive = 3
>> > num_pings_to_alive = 3
>> > revive_interval = 120
>> > status_check_timeout = 4
>> > }
>> > home_server_pool my_auth_failover {
>> > type = fail-over
>> > home_server = localhost
>> > }
>> > realm example.com {
>> > auth_pool = my_auth_failover
>> > }
>> > realm LOCAL {
>> > }
>> > realm DOMAIN.LOC {
>> > authhost = LOCAL
>> > accthost = LOCAL
>> > }
>> > realm DOMAIN {
>> > authhost = LOCAL
>> > accthost = LOCAL
>> > }
>> > radiusd: #### Instantiating modules ####
>> > instantiate {
>> > Module: Linked to module rlm_expr
>> > Module: Instantiating expr
>> > }
>> > radiusd: #### Loading Virtual Servers ####
>> > server {
>> > modules {
>> > Module: Checking authenticate {...} for more modules
>> to load
>> > Module: Linked to module rlm_mschap
>> > Module: Instantiating mschap
>> > mschap {
>> > use_mppe = yes
>> > require_encryption = no
>> > require_strong = no
>> > with_ntdomain_hack = yes
>> > ntlm_auth = "/usr/bin/ntlm_auth
>> --request-nt-key
>> > --domain=%{mschap:NT-Domain:-DOMAIN}
>> > --username=%{mschap:User-Name}
>> --challenge=%{mschap:Challenge:-00}
>> >
>> --nt-response=%{mschap:NT-Response:-00}"
>> > }
>> > Module: Checking authorize {...} for more modules to
>> load
>> > Module: Linked to module rlm_preprocess
>> > Module: Instantiating preprocess
>> > preprocess {
>> > huntgroups =
>> "/usr/local/etc/raddb/huntgroups"
>> > hints = "/usr/local/etc/raddb/hints"
>> > with_ascend_hack = no
>> > ascend_channels_per_line = 23
>> > with_ntdomain_hack = no
>> > with_specialix_jetstream_hack = no
>> > with_cisco_vsa_hack = no
>> > with_alvarion_vsa_hack = no
>> > }
>> > Module: Linked to module rlm_realm
>> > Module: Instantiating realmslash
>> > realm realmslash {
>> > format = "prefix"
>> > delimiter = "\"
>> > ignore_default = no
>> > ignore_null = no
>> > }
>> > Module: Instantiating suffix
>> > realm suffix {
>> > format = "suffix"
>> > delimiter = "@"
>> > ignore_default = no
>> > ignore_null = no
>> > }
>> > Module: Linked to module rlm_eap
>> > Module: Instantiating eap
>> > eap {
>> > default_eap_type = "peap"
>> > timer_expire = 60
>> > ignore_unknown_eap_types = no
>> > cisco_accounting_username_bug = no
>> > }
>> > Module: Linked to sub-module rlm_eap_md5
>> > Module: Instantiating eap-md5
>> > Module: Linked to sub-module rlm_eap_leap
>> > Module: Instantiating eap-leap
>> > Module: Linked to sub-module rlm_eap_gtc
>> > Module: Instantiating eap-gtc
>> > gtc {
>> > challenge = "Password: "
>> > auth_type = "PAP"
>> > }
>> > Module: Linked to sub-module rlm_eap_tls
>> > Module: Instantiating eap-tls
>> > tls {
>> > rsa_key_exchange = no
>> > dh_key_exchange = yes
>> > rsa_key_length = 512
>> > dh_key_length = 512
>> > verify_depth = 0
>> > pem_file_type = yes
>> > private_key_file =
>> "/usr/local/etc/raddb/certs/server.pem"
>> > certificate_file =
>> "/usr/local/etc/raddb/certs/server.pem"
>> > CA_file =
>> "/usr/local/etc/raddb/certs/ca.pem"
>> > private_key_password = "whatever"
>> > dh_file =
>> "/usr/local/etc/raddb/certs/dh"
>> > random_file =
>> "/usr/local/etc/raddb/certs/random"
>> > fragment_size = 1024
>> > include_length = yes
>> > check_crl = no
>> > cipher_list = "DEFAULT"
>> > make_cert_command =
>> "/usr/local/etc/raddb/certs/bootstrap"
>> > }
>> > Module: Linked to sub-module rlm_eap_ttls
>> > Module: Instantiating eap-ttls
>> > ttls {
>> > default_eap_type = "md5"
>> > copy_request_to_tunnel = no
>> > use_tunneled_reply = no
>> > virtual_server = "inner-tunnel"
>> > }
>> > Module: Linked to sub-module rlm_eap_peap
>> > Module: Instantiating eap-peap
>> > peap {
>> > default_eap_type = "mschapv2"
>> > copy_request_to_tunnel = no
>> > use_tunneled_reply = no
>> > proxy_tunneled_request_as_eap = yes
>> > virtual_server = "inner-tunnel"
>> > }
>> > Module: Linked to module rlm_files
>> > Module: Instantiating files
>> > files {
>> > usersfile =
>> "/usr/local/etc/raddb/users"
>> > acctusersfile =
>> "/usr/local/etc/raddb/acct_users"
>> > compat = "no"
>> > }
>> > Module: Checking preacct {...} for more modules to
>> load
>> > Module: Checking accounting {...} for more modules to
>> load
>> > Module: Linked to module rlm_acct_unique
>> > Module: Instantiating acct_unique
>> > acct_unique {
>> > key = "User-Name, Acct-Session-Id,
>> NAS-IP-Address,
>> > Client-IP-Address, NAS-Port-Id"
>> > }
>> > Module: Linked to module rlm_detail
>> > Module: Instantiating detail
>> > detail {
>> > detailfile =
>> >
>> "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
>> > header = "%t"
>> > detailperm = 384
>> > dirperm = 493
>> > locking = no
>> > log_packet_header = no
>> > }
>> > Module: Linked to module rlm_radutmp
>> > Module: Instantiating radutmp
>> > radutmp {
>> > filename = "/var/log/radius/radutmp"
>> > username = "%{User-Name}"
>> > case_sensitive = yes
>> > check_with_nas = yes
>> > perm = 384
>> > callerid = yes
>> > }
>> > Module: Checking session {...} for more modules to
>> load
>> > Module: Checking post-proxy {...} for more modules to
>> load
>> > }
>> > }
>> > radiusd: #### Opening IP addresses and Ports ####
>> > bind_address = *
>> > WARNING: The directive 'bind_adress' is
>> deprecated, and will be removed in
>> > future versions of FreeRADIUS. Please edit the
>> configuration files to use
>> > the directive 'listen'.
>> > Listening on authentication address * port 1812
>> > Listening on accounting address * port 1813
>> > Listening on proxy address * port 1814
>> > Ready to process requests.
>> > rad_recv: Access-Request packet from host
>> 192.100.16.11 port 1308, id=0,
>> > length=217
>> > Message-Authenticator =
>> 0x92d1b860b93a1c6d28f08eaa37697101
>> > Service-Type = Framed-User
>> > User-Name =
>> "DOMAIN\\user\000"
>> > Framed-MTU = 1488
>> > Called-Station-Id =
>> "00-16-E0-04-FE-44:pcountry"
>> > Calling-Station-Id =
>> "00-1B-77-4D-1A-74"
>> > NAS-Identifier = "PISO 7 UG SISTEMAS"
>> > NAS-Port-Type = Wireless-802.11
>> > Connect-Info = "CONNECT 54Mbps
>> 802.11g"
>> > EAP-Message =
>> 0x0200001601434c49434f554e5452595c736d6174697a
>> > NAS-IP-Address = 192.100.16.11
>> > NAS-Port = 1
>> > NAS-Port-Id = "STA port # 1"
>> > +- entering group authorize
>> > ++[preprocess] returns ok
>> > ++[mschap] returns noop
>> > rlm_realm: Looking up realm "DOMAIN" for
>> User-Name = "DOMAIN\user"
>> > rlm_realm: Found realm "DOMAIN"
>> > rlm_realm: Adding Stripped-User-Name =
>> "user"
>> > rlm_realm: Adding Realm = "DOMAIN"
>> > rlm_realm: Authentication realm is LOCAL.
>> > ++[realmslash] returns ok
>> > rlm_realm: Request already proxied. Ignoring.
>> > ++[suffix] returns ok
>> > rlm_eap: EAP packet type response id 0 length 22
>> > rlm_eap: No EAP Start, assuming it's an on-going
>> EAP conversation
>> > ++[eap] returns updated
>> > users: Matched entry user at line 178
>> > ++[files] returns ok
>> > rad_check_password: Found Auth-Type EAP
>> > auth: type "EAP"
>> > WARNING: Unknown value specified for Auth-Type.
>> Cannot perform requested
>> > action.
>> > auth: Failed to validate the user.
>> > Login incorrect: [DOMAIN\\user\000] (from
>> client 192.100.16.11 port 1 cli
>> > 00-1B-77-4D-1A-74)
>> > Sending Access-Reject of id 0 to 192.100.16.11 port
>> 1308
>> > Finished request 0.
>> > Going to the next request
>> > Waking up in 4.9 seconds.
>> > rad_recv: Access-Request packet from host
>> 192.100.16.11 port 1310, id=0,
>> > length=217
>> > Message-Authenticator =
>> 0xf829fc414e9407ab04ede033d5a60941
>> > Service-Type = Framed-User
>> > User-Name =
>> "DOMAIN\\user\000"
>> > Framed-MTU = 1488
>> > Called-Station-Id =
>> "00-16-E0-04-FE-44:pcountry"
>> > Calling-Station-Id =
>> "00-1B-77-4D-1A-74"
>> > NAS-Identifier = "PISO 7 UG SISTEMAS"
>> > NAS-Port-Type = Wireless-802.11
>> > Connect-Info = "CONNECT 54Mbps
>> 802.11g"
>> > EAP-Message =
>> 0x0200001601434c49434f554e5452595c736d6174697a
>> > NAS-IP-Address = 192.100.16.11
>> > NAS-Port = 1
>> > NAS-Port-Id = "STA port # 1"
>> > +- entering group authorize
>> > ++[preprocess] returns ok
>> > ++[mschap] returns noop
>> > rlm_realm: Looking up realm "DOMAIN" for
>> User-Name = "DOMAIN\user"
>> > rlm_realm: Found realm "DOMAIN"
>> > rlm_realm: Adding Stripped-User-Name =
>> "user"
>> > rlm_realm: Adding Realm = "DOMAIN"
>> > rlm_realm: Authentication realm is LOCAL.
>> > ++[realmslash] returns ok
>> > rlm_realm: Request already proxied. Ignoring.
>> > ++[suffix] returns ok
>> > rlm_eap: EAP packet type response id 0 length 22
>> > rlm_eap: No EAP Start, assuming it's an on-going
>> EAP conversation
>> > ++[eap] returns updated
>> > users: Matched entry user at line 178
>> > ++[files] returns ok
>> > rad_check_password: Found Auth-Type EAP
>> > auth: type "EAP"
>> > WARNING: Unknown value specified for Auth-Type.
>> Cannot perform requested
>> > action.
>> > auth: Failed to validate the user.
>> > Login incorrect: [DOMAIN\\user\000] (from
>> client 192.100.16.11 port 1 cli
>> > 00-1B-77-4D-1A-74)
>> > Sending Access-Reject of id 0 to 192.100.16.11 port
>> 1310
>> > Finished request 1.
>> > Going to the next request
>> > Waking up in 4.7 seconds.
>> > rad_recv: Access-Request packet from host
>> 192.100.16.11 port 1312, id=0,
>> > length=217
>> > Message-Authenticator =
>> 0xef8314925f34ccf891d91ca6fa18857d
>> > Service-Type = Framed-User
>> > User-Name =
>> "DOMAIN\\user\000"
>> > Framed-MTU = 1488
>> > Called-Station-Id =
>> "00-16-E0-04-FE-44:pcountry"
>> > Calling-Station-Id =
>> "00-1B-77-4D-1A-74"
>> > NAS-Identifier = "PISO 7 UG SISTEMAS"
>> > NAS-Port-Type = Wireless-802.11
>> > Connect-Info = "CONNECT 54Mbps
>> 802.11g"
>> > EAP-Message =
>> 0x0200001601434c49434f554e5452595c736d6174697a
>> > NAS-IP-Address = 192.100.16.11
>> > NAS-Port = 1
>> > NAS-Port-Id = "STA port # 1"
>> > +- entering group authorize
>> > ++[preprocess] returns ok
>> > ++[mschap] returns noop
>> > rlm_realm: Looking up realm "DOMAIN" for
>> User-Name = "DOMAIN\user"
>> > rlm_realm: Found realm "DOMAIN"
>> > rlm_realm: Adding Stripped-User-Name =
>> "user"
>> > rlm_realm: Adding Realm = "DOMAIN"
>> > rlm_realm: Authentication realm is LOCAL.
>> > ++[realmslash] returns ok
>> > rlm_realm: Request already proxied. Ignoring.
>> > ++[suffix] returns ok
>> > rlm_eap: EAP packet type response id 0 length 22
>> > rlm_eap: No EAP Start, assuming it's an on-going
>> EAP conversation
>> > ++[eap] returns updated
>> > users: Matched entry user at line 178
>> > ++[files] returns ok
>> > rad_check_password: Found Auth-Type EAP
>> > auth: type "EAP"
>> > WARNING: Unknown value specified for Auth-Type.
>> Cannot perform requested
>> > action.
>> > auth: Failed to validate the user.
>> > Login incorrect: [DOMAIN\\user\000] (from
>> client 192.100.16.11 port 1 cli
>> > 00-1B-77-4D-1A-74)
>> > Sending Access-Reject of id 0 to 192.100.16.11 port
>> 1312
>> > Finished request 2.
>> > Going to the next request
>> > Waking up in 4.4 seconds.
>> > Cleaning up request 0 ID 0 with timestamp +113
>> > Waking up in 0.2 seconds.
>> > Cleaning up request 1 ID 0 with timestamp +113
>> > Waking up in 0.2 seconds.
>> > Cleaning up request 2 ID 0 with timestamp +114
>> > Ready to process requests.
>> >
>> > Santiago Matiz (santimatiz at yahoo.com)
>> > Systems Engineer
>> > Bogotá, Colombia (South America)
>> >
>> >
>> >
>> >
>> > -
>> > List info/subscribe/unsubscribe? See
>> > http://www.freeradius.org/list/users.html
>> >
>
>
>
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>
More information about the Freeradius-Users
mailing list