NTLM_auth active directory - what is wrong?

[tnt at kalik.net]

For some reason some systems process inner-tunnel virtual server before
default. Since that server knows nothing about ntlm_auth this error
occurs. Best solution is probably to add ntlm_auth to instatiate section
of radiusd.conf as well. Just in case. And add that step to
configuration instructions in the HOWTO.

Ivan Kalik
Kalik Informatika ISP

Dana 7/10/2008, "Santiago Matiz V" <santimatiz at yahoo.com> piše:

>Hi Alan, thank for your help
>
>I configured my users file with your direction :
>
>user	Auth-Type := ntlm_auth
>
>DEFAULT       Auth-Type = MSCHAP
>	      Fall-Through = 1,
>	      Reply-Message = "MsChap user"
>
>
>
>but when i run radiusd -X appears :
>
>"/usr/local/etc/raddb/users[1]: Parse error (check) for entry user: Unknown value ntlm_auth for attribute Auth-Type"
>
>
>
>
>
>
>Santiago Matiz (santimatiz at yahoo.com)
>Systems Engineer
>Pontificia Universidad Javeriana
>http://www.javeriana.edu.co
>Bogotá, Colombia (South America)
>
>
>--- On Tue, 10/7/08, Alan DeKok <aland at deployingradius.com> wrote:
>
>> From: Alan DeKok <aland at deployingradius.com>
>> Subject: Re: NTLM_auth active directory - what is wrong?
>> To: santimatiz at yahoo.com, "FreeRadius users mailing list" <freeradius-users at lists.freeradius.org>
>> Date: Tuesday, October 7, 2008, 3:24 PM
>> Santiago Matiz V wrote:
>> > Syed thanks for your answer, when i configure the file
>> "users" with "ntlm_auth" appears the
>> error :
>> > 
>> > "/usr/local/etc/raddb/users[230]: Parse error
>> (check) for entry DEFAULT: Unknown value ntlm_auth for
>> attribute Auth-Type
>> > Errors reading /usr/local/etc/raddb/users"
>> 
>>   If it does that, it's because you haven't
>> followed the guide.  Among
>> other things, the guide says to add the entry at the TOP of
>> the "users"
>> file.  And you obviously haven't done that.
>> 
>>   Which files have you edited, and why?
>> 
>>   Alan DeKok.
>
>
>      
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>