Simultaneous-Use check not working

[tnt at kalik.net]

>It is "other" both in the localhost client and in the client I created
>to test using radiustest.
>
>I have, it shows 5 sessions for this user.
>
>mysql> SELECT COUNT(*)  FROM radacct WHERE UserName='yellowhousejake'
>AND AcctStopTime = 0;
>+----------+
>| COUNT(*) |
>+----------+
>|        5 |
>+----------+
>1 row in set (0.00 sec)
>
>> - send Access-Request
>
>Changed Packet-Type to Access-Request, auth is approved.
>
>--------------------10/27/2008 2:26:27 PM Test started
>[check_simul]-------------------------
>Info:Sending Access-Request of id 0 to 10.0.241.95:1645
>	User-Name = "yellowhousejake"
>	User-Password = "marlin"
>Info: Access-Accept packet from host 10.0.241.95:1645, id=0, length=89
>	Service-Type = Framed-User
>	Framed-Protocol = PPP
>	Framed-IP-Address = 255.255.255.254
>	Framed-IP-Netmask = 255.255.255.255
>	Framed-Routing = None
>	Framed-Compression = Van-Jacobson-TCP-IP
>	Filter-Id = "std.ppp"
>	Framed-MTU = 1500
>	Port-Limit = 1
>	Idle-Timeout = 600
>	Session-Timeout = 28800
>
>	   Total approved auths:  1
>	     Total denied auths:  0
>	       Total lost auths:  0
>	       Total time(secs):  0
>
>Since I am testing with a test client from my laptop, and using radtest
>on the radius server (localhost), and using only accounting data to
>check for simultaneous use, does checkrad even come into play?
>

Not when nastype is set to "other". Post the debug (radiusd -X). And
user/group entry (where is Simultaneous-Use set).

Ivan Kalik
Kalik Informatika ISP