Simultaneous-Use check not working
DAve
dave.list at pixelhammer.com
Mon Oct 27 22:12:30 CET 2008
tnt at kalik.net wrote:
>> It is "other" both in the localhost client and in the client I created
>> to test using radiustest.
>>
>> I have, it shows 5 sessions for this user.
>>
>> mysql> SELECT COUNT(*) FROM radacct WHERE UserName='yellowhousejake'
>> AND AcctStopTime = 0;
>> +----------+
>> | COUNT(*) |
>> +----------+
>> | 5 |
>> +----------+
>> 1 row in set (0.00 sec)
>>
>>> - send Access-Request
>> Changed Packet-Type to Access-Request, auth is approved.
>>
>> --------------------10/27/2008 2:26:27 PM Test started
>> [check_simul]-------------------------
>> Info:Sending Access-Request of id 0 to 10.0.241.95:1645
>> User-Name = "yellowhousejake"
>> User-Password = "marlin"
>> Info: Access-Accept packet from host 10.0.241.95:1645, id=0, length=89
>> Service-Type = Framed-User
>> Framed-Protocol = PPP
>> Framed-IP-Address = 255.255.255.254
>> Framed-IP-Netmask = 255.255.255.255
>> Framed-Routing = None
>> Framed-Compression = Van-Jacobson-TCP-IP
>> Filter-Id = "std.ppp"
>> Framed-MTU = 1500
>> Port-Limit = 1
>> Idle-Timeout = 600
>> Session-Timeout = 28800
>>
>> Total approved auths: 1
>> Total denied auths: 0
>> Total lost auths: 0
>> Total time(secs): 0
>>
>> Since I am testing with a test client from my laptop, and using radtest
>> on the radius server (localhost), and using only accounting data to
>> check for simultaneous use, does checkrad even come into play?
>>
>
> Not when nastype is set to "other". Post the debug (radiusd -X). And
> user/group entry (where is Simultaneous-Use set).
Here is the last debug I ran plus the query results for that user's config.
http://pixelhammer.com/Dan/debug.txt
DAve
>
> Ivan Kalik
> Kalik Informatika ISP
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>
--
I am watching the debate and I am very disappointed. The rules are
simple, "answer the question". I would vote right now, and I can
in Indiana, for the man who answered the question directly, in
less than a minute, and then sat down before the green light was out.
More information about the Freeradius-Users
mailing list