No authenticate method (Auth-Type) configuration found

[Syed Anwarul Hasan]

Hi Jason,

 I also have the same problem before. Change the User-Password to
Cleartext-Password := "your password" in the users file.

I hope it will work.

SYED



On Thu, Sep 18, 2008 at 8:15 AM, browan.jason <browan.jason at gmail.com>wrote:

>  Hi all,
> I have got some problems when use freeradius.
> freeradius version:
> FreeRADIUS Version 1.0.5, for host , built on Sep  9 2008 at 11:11:51
> My system:
> Fedora core 4
> Kernel version:
> 2.6.11-1.1369_FC4
>
> When i test the radius server, I have add something into
> /usr/local/etc/raddb/users like this:
>  test1 Auth-Type := Local, User-Password == "123456"
>     User-Password =="123456",
>     Service-Type=Framed-User,
>     Framed-Protocol=PPP,
>     Framed-IP-Address=192.168.121.99,
>     Framed-IP-Netmask=255.255.252.0
> Add this into clients.conf:
>  client 192.168.121.43{
>     secret      =   mmmmmm
>     shortname   =   remote
>     nastype     =   other
> }
>
> Then start the freeradius server and use radtest to check this server:
>
> radtest test1 123456 192.168.121.49 0 mmmmmm
> 192.168.121.49 is my server's IP, My local machine IP address is
> 192.168.121.43.
>
> But, It always failed!
> Following is the client's information:
>  Sending Access-Request of id 161 to 192.168.121.49:1812
>         User-Name = "test1"
>         User-Password = "123456"
>         NAS-IP-Address = freepp
>         NAS-Port = 0
> rad_recv: Access-Reject packet from host 192.168.121.49:1812, id=161, length=20
>
>
> And radius server's debuf information:
>  rad_recv: Access-Request packet from host 192.168.121.43:32768
> , id=161, length=57
>         User-Name = "test1"
>         User-Password = "123456"
>         NAS-IP-Address = 255.255.255.255
>         NAS-Port = 0
>   Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 2
>   modcall[authorize]: module "preprocess" returns ok for request 2
>   modcall[authorize]: module "chap" returns noop for request 2
>   modcall[authorize]: module "mschap" returns noop for request 2
>     rlm_realm: No '@' in User-Name = "test1", looking up realm NULL
>     rlm_realm: No such realm "NULL"
>   modcall[authorize]: module "suffix" returns noop for request 2
>   rlm_eap: No EAP-Message, not doing EAP
>   modcall[authorize]: module "eap" returns noop for request 2
> *modcall: group authorize returns ok for request 2*
> *
> auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user
> *
> *auth: Failed to validate the user.*
> Delaying request 2 for 1 seconds
> Finished request 2
> Going to the next request
> --- Walking the entire request list ---
> Waking up in 1 seconds...
> --- Walking the entire request list ---
> Waking up in 1 seconds...
> --- Walking the entire request list ---
> Sending Access-Reject of id 161 to 192.168.121.43:32768
> Waking up in 4 seconds...
> --- Walking the entire request list ---
> Cleaning up request 2 ID 161 with timestamp 48d1f126
> Nothing to do.  Sleeping until we see a request.
>
> As you see, every time he told me "No authenticate method(Auth-Type)
> configuration found for the request......", I don't konw why?
> Could you please give me some help?
> Many Thanks!
> 2008-09-18
> ------------------------------
> Jason Zhang
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20080918/79a1bd72/attachment.html>