Dear Syed,
Thank you very much.
I have try the method as you say, but ,it seems to be the same error.
modcall: group authorize returns ok for request 0
auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user
auth: Failed to validate the user.
2008-09-18
Jason
发件人： Syed Anwarul Hasan
发送时间： 2008-09-18 15:27:18
收件人： FreeRadius users mailing list
抄送：
主题： Re: No authenticate method (Auth-Type) configuration found
Hi Jason,
I also have the same problem before. Change the User-Password to Cleartext-Password := "your password" in the users file.
I hope it will work.
SYED
On Thu, Sep 18, 2008 at 8:15 AM, browan.jason <browan.jason at gmail.com> wrote:
Hi all,
I have got some problems when use freeradius.
freeradius version:
FreeRADIUS Version 1.0.5, for host , built on Sep 9 2008 at 11:11:51
My system:
Fedora core 4
Kernel version:
2.6.11-1.1369_FC4
When i test the radius server, I have add something into /usr/local/etc/raddb/users like this:
test1 Auth-Type := Local, User-Password == "123456"
User-Password =="123456",
Service-Type=Framed-User,
Framed-Protocol=PPP,
Framed-IP-Address=192.168.121.99,
Framed-IP-Netmask=255.255.252.0
Add this into clients.conf:
client 192.168.121.43{
secret = mmmmmm
shortname = remote
nastype = other
}
Then start the freeradius server and use radtest to check this server:
radtest test1 123456 192.168.121.49 0 mmmmmm
192.168.121.49 is my server's IP, My local machine IP address is 192.168.121.43.
But, It always failed!
Following is the client's information:
Sending Access-Request of id 161 to 192.168.121.49:1812
User-Name = "test1"
User-Password = "123456"
NAS-IP-Address = freepp
NAS-Port = 0
rad_recv: Access-Reject packet from host 192.168.121.49:1812, id=161, length=20
And radius server's debuf information:
rad_recv: Access-Request packet from host 192.168.121.43:32768, id=161, length=57
User-Name = "test1"
User-Password = "123456"
NAS-IP-Address = 255.255.255.255
NAS-Port = 0
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
modcall[authorize]: module "chap" returns noop for request 2
modcall[authorize]: module "mschap" returns noop for request 2
rlm_realm: No '@' in User-Name = "test1", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 2
modcall: group authorize returns ok for request 2
auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user
auth: Failed to validate the user.
Delaying request 2 for 1 seconds
Finished request 2
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 161 to 192.168.121.43:32768
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 2 ID 161 with timestamp 48d1f126
Nothing to do. Sleeping until we see a request.
As you see, every time he told me "No authenticate method(Auth-Type) configuration found for the request......", I don't konw why?
Could you please give me some help?
Many Thanks!
2008-09-18
Jason Zhang
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20080918/43cf5b76/attachment.html>