Download/use luser error

[tnt at kalik.net]

You should use "+=" instead of "=" to add multiple attributes with
the same name to the reply. No idea if that works in pre 1.0 version.

Ivan Kalik
Kalik Informatika ISP


Dana 18/9/2008, "Alex Moen" <alexm at ndtel.com> piše:

>Hey all,
>
>I am having a problem connecting to a Cisco 10k.  Here's the user:
>
>user at wherever.com Password == "ctdn"
>         Service-Type = Framed-User,
>         Framed-Protocol = PPP,
>         Context-Name = "wherever.com",
>         Cisco-Account-Info = "Andtc_512",
>         Cisco-AVPair = "ip:addr-pool=wherever",
>         Cisco-AVPair = "ip:vrf-id=WHEREVER",
>         Cisco-AVPair = "ip:ip-unnumbered=loopback 1",
>         Cisco-AVPair = "subscriber:sg-service-type=primary"
>
>When I test this, I get the following:
>
>radtest user at wherever.com ctdn 127.0.0.1:1812 10 testing123
>Sending Access-Request of id 183 to 127.0.0.1:1812
>         User-Name = "user at wherever.com"
>         User-Password = "ctdn"
>         NAS-IP-Address = server
>         NAS-Port = 10
>rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=183, length=92
>         Service-Type = Framed-User
>         Framed-Protocol = PPP
>         Context-Name = "wherever.com"
>         Cisco-Account-Info = "Andtc_512"
>         Cisco-AVPair = "ip:addr-pool=wherever"
>
>Note that I don't get the last 3 "Cisco-AVPair" options.
>
>OK, I am running Version 0.9.3... Big deal!  It's been working great for years until the network guy decided to change to the Cisco 10k.
>
>Anticipating a flood of "Upgrade, stupid!" e-mails, I decided to upgrade, just to see if that would help.
>
>So I downloaded the latest and greatest, gunzipped it (even tried the bunzip version), but when I try to untar the file, I get "tar: directory
>checksum error"...
>
>The 10k guy says that he can use this user config in his Steel Belted Radius server (actually kinda funny, he's a 10k guy using Juniper software)...
>Am I just using the wrong syntax that SBR fixes automagically?
>
>Any ideas?
>
>TIA,
>
>Alex
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>