problem with ip_pools

[tnt at kalik.net]

You should use sql_ippool for non-continuous pools.

Ivan Kalik
Kalik Informatika ISP


Dana 30/9/2008, "Marco C. Coelho" <maillist1 at argontech.net> piše:

>I ran out of IP space in my original IP_Pool, and since the next
>available addresses were non contiguous, I added a second pool.  Here's
>the snippet of my radiusd.conf:  The problem is that the first pool
>comes up and is used, but when it runs out of IP space, the second pool
>never gets used.
>
>If the db files are deleted and freeradius restarted, should both sets
>of files get recreated on start up?
>
>  ippool main_pool {
>
>    #  range-start,range-stop: The start and end ip
>    #  addresses for the ip pool
>    range-start = 64.202.227.1
>    range-stop = 64.202.229.254
>
>    #  netmask: The network mask used for the ip's
>    netmask = 255.255.255.0
>
>    #  cache-size: The gdbm cache size for the db
>    #  files. Should be equal to the number of ip's
>    #  available in the ip pool
>    cache-size = 768
>
>    # session-db: The main db file used to allocate ip's to clients
>    session-db = ${raddbdir}/db.ippool
>
>    # ip-index: Helper db index file used in multilink
>    ip-index = ${raddbdir}/db.ipindex
>
>    # override: Will this ippool override a Framed-IP-Address already set
>    override = no
>
>    # maximum-timeout: If not zero specifies the maximum time in seconds an
>    # entry may be active. Default: 0
>    maximum-timeout = 0
>  }
>
>  ippool main_pool2 {
>
>    #  range-start,range-stop: The start and end ip
>    #  addresses for the ip pool
>    range-start = 64.202.237.1
>    range-stop = 64.202.239.254
>
>    #  netmask: The network mask used for the ip's
>    netmask = 255.255.255.0
>
>    #  cache-size: The gdbm cache size for the db
>    #  files. Should be equal to the number of ip's
>    #  available in the ip pool
>    cache-size = 768
>
>    # session-db: The main db file used to allocate ip's to clients
>    session-db = ${raddbdir}/db.ippool2
>
>    # ip-index: Helper db index file used in multilink
>    ip-index = ${raddbdir}/db.ipindex2
>
>    # override: Will this ippool override a Framed-IP-Address already set
>    override = no
>
>    # maximum-timeout: If not zero specifies the maximum time in seconds an
>    # entry may be active. Default: 0
>    maximum-timeout = 0
>  }
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>