What can cause the "Exiting normally" without prompting

韩枫 switchport at hotmail.com
Mon Apr 6 09:00:22 CEST 2009


hi,

    the os is changed from x86_64 to x86, this is no longer the problem. 

    x86_64 os are probably the cause of this problem.
 


From: switchport at hotmail.com
To: freeradius-users at lists.freeradius.org
Subject: RE: What can cause the "Exiting normally" without prompting
Date: Tue, 31 Mar 2009 19:51:14 +0000



thanks,
logs (dmesg, messages, radius.log) does not have any special tips.
 
> Date: Tue, 31 Mar 2009 16:02:01 -0300
> Subject: Re: What can cause the "Exiting normally" without prompting
> From: listas.luafran at gmail.com
> To: freeradius-users at lists.freeradius.org
> 
> Just in case this can help you, take a look at
> http://linux-mm.org/OOM_Killer
> 
> Basically the linux kernel has mechanism to kill processes when it
> runs out of memory. In this case kill signal should not be SIGTERM but
> googling I found it may be possible in some cases the kernel use this
> signal.
> 
> Search in your kernel logs (/var/log/dmesg) to see if you have
> something like "invoked oom-killer"
> 
> Regards
> Luciano
> 
> 2009/3/31 韩枫 <switchport at hotmail.com>:
> > sorry, it includes the prepaid module that i write. u can not reproduce.
> >
>! > test shell
> > ------------------------
> > #!/bin/bash
> > i=0
> > while true
> > do
> > date
> > time ../radclient -p 16 -q -s -t 3 -r 3 -f auth_test 127.0.0.1:1812 auth
> > xxxxxx
> > i=`expr $i \+ 1`
> > echo $i
> > done
> > ----------------------------
> > auth_test
> > User-Name=test1, User-Password=111111, Calling-Station-Id=192.168.10.1
> > ,NAS-IP-Address=192.168.0.1, NAS-Port=1, Service-Type=Framed,
> > Framed-Protocol=PPP
> > User-Name=test2, User-Password=111111, Calling-Station-Id=192.168.10.1
> > ,NAS-IP-Address=192.168.0.1, NAS-Port=2, Service-Type=Framed,
> > Framed-Protocol=PPP
> > User-Name=test3, User-Password=111111, Calling-Station-Id=192.168.10.1
> > ,NAS-IP-Address=192.168.0.1, NAS-Port=3, Service-Type=Framed,
> > Framed-Protocol=PPP
> > User! -Name=test4, User-Password=111111, Calling-Station-Id=192.168.10.1
> > ,NAS-IP-Address=192.168.0.1, NAS-Port=4, Service-Type=Framed,
> > Framed-Protocol=PPP
> > User-Name=test5, User-Password=111111, Calling-Station-Id=192.168.10.1
> > ,NAS-IP-Address=192.168.0.1, NAS-Port=5, Service-Type=Framed,
> > Framed-Protocol=PPP
> > ...
> > ---------------------------
> >
> > i am testing, possible the same code have not the problem on Centos 5.2 X86.
> > CENTOS 5.2 X86_64 have the problem.
> >
> >> Date: Mon, 30 Mar 2009 16:17:02 -0300
> >> Subject: Re: What can cause the "Exiting normally" without prompting
> >> From: listas.luafran at gmail.com
> >> To: freeradius-users at lists.freeradius.org
> >>
> >> 2009/3/29 韩枫 <switchport at hotmail.com>:
> >> > hi,
> >> > os is centos 5.2 x64,pgsql is 8.3.7. i have not set the cpu quotas.
> >> > Ev! en, I do not know how to set up cpu quotas.
> >> > --------------------------------------------------------------
> >> > # ulimit -a
> >> > core file size (blocks, -c) unlimited
> >> > data seg size (kbytes, -d) unlimited
> >> > scheduling priority (-e) 0
> >> > file size (blocks, -f) unlimited
> >> > pending signals (-i) 139264
> >> > max locked memory (kbytes, -l) 32
> >> > max memory size (kbytes, -m) unlimited
> >> > open files (-n) 8192
> >> > pipe size (512 bytes, -p) 8
> >>! > POSIX message queues &nb! sp; (bytes, -q) 819200
> >> > real-time priority (-r) 0
> >> > stack size (kbytes, -s) 10240
> >> > cpu time (seconds, -t) unlimited
> >> > max user processes (-u) 139264
> >> > virtual memory (kbytes, -v) unlimite! d
> >> > file locks (-x) unlimited
> >> > ;
> >> > --------------------------------------------------------------
> >> > Whether or not the changed module will cause this to happen?
> >> >
> >> >> Date: Sat, 28 Mar 2009 08:25:48 -0700
> >> >> From: aland at deployingradius.com
> >> >> To: freeradius-users at lists.freeradius.org
> >> >> Subject: Re: What can cause the "Exiting normally" without prompting
> >> >>
> >> >> switchport at hotmail.com wrote:
> >> >> > i am testing freeradius 2.1.X by radclient , when the number of
> >> >> > requests arrive 6million+, freeradius will "Exiting normally"
> >> >> > without> >> > prompting.
> >> >>
> >> >> The only time it exits is when something tells it to exit. e.g. via
> >> >> SIGTERM.
> >> &g! t;>
> >> >> I've never seen it exit like that in any of my performance tests.
> >> >> Maybe you have CPU quotas for the server?
> >> >>
> >>
> >> Could you give more details about how to reproduce the situation?
> >>
> >> Thanks
> >> Luciano
> >>
> >> -
> >> List info/subscribe/unsubscribe? See
> >> http://www.freeradius.org/list/users.html
> >
> > ________________________________
> > 微软地图实时路况,为您节省的不仅仅是时间! 立即查看!
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> >
> 
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html



把MSN装进手机,更多聊天乐趣等你挖掘! 立刻下载!
_________________________________________________________________
Messenger安全保护中心,免费修复系统漏洞,保护Messenger安全!
http://im.live.cn/safe/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20090406/b5c83aaf/attachment.html>


More information about the Freeradius-Users mailing list