Decoupled accounting

Devinder Singh devinbhullar at gmail.com
Tue Aug 4 08:48:57 CEST 2009


Hi Ivan

I copied the ca.der and client.p12 to the XP machine

no problems with installing them on the XP machine

when i access my SSID palstaff i managed to get  a pop up screen
saying to select devinder at paletemm.com as the cert

however Radius gives error messages
tls] <<< TLS 1.0 Handshake [length 03b2], Certificate
--> verify error:num=20:unable to get local issuer certificate
[tls] >>> TLS 1.0 Alert [length 0002], fatal unknown_ca
TLS Alert write:fatal:unknown CA
    TLS_accept:error in SSLv3 read client certificate B
rlm_eap: SSL error error:140890B2:SSL
routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned
SSL: SSL_read failed in a system call (-1), TLS session fails.
TLS receive handshake failed during operation
[tls] eaptls_process returned 4
[eap] Handler failed in EAP/tls
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject]     expand: %{User-Name} -> devinder at palettemm.com
 attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 6 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 6
Sending Access-Reject of id 126 to 203.121.4.59 port 6001
        EAP-Message = 0x04070004
        Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.8 seconds.
Cleaning up request 0 ID 120 with timestamp +781
Cleaning up request 1 ID 121 with timestamp +781
Cleaning up request 2 ID 122 with timestamp +781
Cleaning up request 3 ID 123 with timestamp +781
Cleaning up request 4 ID 124 with timestamp +781
Cleaning up request 5 ID 125 with timestamp +781
Waking up in 1.0 seconds.
Cleaning up request 6 ID 126 with timestamp +781
Ready to process requests.



2009/8/4 Devinder Singh <devinbhullar at gmail.com>:
> Hi
>
> I mnaged to follow the steps in /etc/raddb/certs/README
>
> and copied ca.der and client.p12 to XP machine
>
> When i run Radiusd -X i get
>
> Found Auth-Type = EAP
> +- entering group authenticate {...}
> [eap] Request found, released from the list
> [eap] EAP/tls
> [eap] processing type tls
> [tls] Authenticate
> [tls] processing EAP-TLS
> [tls] eaptls_verify returned 7
> [tls] Done initial handshake
> [tls] <<< TLS 1.0 Handshake [length 03b2], Certificate
> --> verify error:num=20:unable to get local issuer certificate
> [tls] >>> TLS 1.0 Alert [length 0002], fatal unknown_ca
> TLS Alert write:fatal:unknown CA
>    TLS_accept:error in SSLv3 read client certificate B
> rlm_eap: SSL error error:140890B2:SSL
> routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned
> SSL: SSL_read failed in a system call (-1), TLS session fails.
> TLS receive handshake failed during operation
> [tls] eaptls_process returned 4
> [eap] Handler failed in EAP/tls
> [eap] Failed in EAP select
> ++[eap] returns invalid
> Failed to authenticate the user.
> Using Post-Auth-Type Reject
> +- entering group REJECT {...}
> [attr_filter.access_reject]     expand: %{User-Name} -> devinder at palettemm.com
>  attr_filter: Matched entry DEFAULT at line 11
> ++[attr_filter.access_reject] returns updated
> Delaying reject of request 6 for 1 seconds
> Going to the next request
> Waking up in 0.9 seconds.
> Sending delayed reject for request 6
> Sending Access-Reject of id 98 to 203.121.4.59 port 6001
>        EAP-Message = 0x040a0004
>        Message-Authenticator = 0x00000000000000000000000000000000
> Waking up in 3.8 seconds.
> Cleaning up request 0 ID 92 with timestamp +7
> Cleaning up request 1 ID 93 with timestamp +7
> Cleaning up request 2 ID 94 with timestamp +7
> Cleaning up request 3 ID 95 with timestamp +7
> Cleaning up request 4 ID 96 with timestamp +7
> Cleaning up request 5 ID 97 with timestamp +7
> Waking up in 1.0 seconds.
> Cleaning up request 6 ID 98 with timestamp +7
> Ready to process requests.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> 2009/8/4 Devinder Singh <devinbhullar at gmail.com>:
>> Ivan
>>
>> this is my director permissiion on /etc/raddb/certs
>>
>> 2009/8/4 Devinder Singh <devinbhullar at gmail.com>:
>>> how do i chown radiusd /etc/raddb/certs
>>>
>>>
>>>
>>> 2009/8/4 Devinder Singh <devinbhullar at gmail.com>:
>>>> ++[unix] returns notfound
>>>> [files] users: Matched entry devinder at palettemm.com at line 94
>>>> ++[files] returns ok
>>>> ++[expiration] returns noop
>>>> ++[logintime] returns noop
>>>> ++[pap] returns noop
>>>> Found Auth-Type = EAP
>>>> +- entering group authenticate {...}
>>>> [eap] Request found, released from the list
>>>> [eap] EAP/tls
>>>> [eap] processing type tls
>>>> [tls] Authenticate
>>>> [tls] processing EAP-TLS
>>>> [tls] Received TLS ACK
>>>> [tls] ACK handshake fragment handler
>>>> [tls] eaptls_verify returned 1
>>>> [tls] eaptls_process returned 13
>>>> ++[eap] returns handled
>>>> Sending Access-Challenge of id 48 to 203.121.4.59 port 6001
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 0x0355040613024d593111300f0603550408130853656c616e676f72310b300906035504071302504a311c301a060355040a131350616c65747465204d756c74696d656469612e3125302306092a864886f70d0109011616646576696e6465724070616c657474656d6d2e636f6d311e301c06035504031315436572746966696361746520417574686f72697479820900d590cbda3a11a132300c0603551d13040530030101ff300d06092a864886f70d01010505000382010100af0f1f02bf323c429efb8f3edbedf6ee6062e61eeb456ba280dc01b51555c2c93ca3d1f3c0ea49ffda0c4ed70949260b0fe6642b689eab183588746e7c2458ce020f27
>>>>        EAP-Message = 0x72d0f2c8ef880796a48a4639
>>>>        Message-Authenticator = 0x00000000000000000000000000000000
>>>>        State = 0x62deb6d561d9bb124f3aa51530d369f1
>>>> Finished request 4.
>>>> Going to the next request
>>>> Waking up in 4.9 seconds.
>>>> rad_recv: Access-Request packet from host 203.121.4.59 port 6001,
>>>> id=49, length=178
>>>>        User-Name = "devinder at palettemm.com"
>>>>        NAS-IP-Address = 203.121.4.59
>>>>        Called-Station-Id = "00-20-a6-6c-49-9d:palstaff"
>>>>        Calling-Station-Id = "00-04-23-7b-56-b9"
>>>>        NAS-Identifier = "ORiNOCO-AP-700-6c-49-9d"
>>>>        State = 0x62deb6d561d9bb124f3aa51530d369f1
>>>>        Framed-MTU = 1400
>>>>        NAS-Port-Type = Wireless-802.11
>>>>        EAP-Message = 0x020700060d00
>>>>        Message-Authenticator = 0x6d2e9d8a5cd95a1a8fc18325b8f88a39
>>>> +- entering group authorize {...}
>>>> ++[preprocess] returns ok
>>>> ++[chap] returns noop
>>>> ++[mschap] returns noop
>>>> [suffix] Looking up realm "palettemm.com" for User-Name =
>>>> "devinder at palettemm.com"
>>>> [suffix] No such realm "palettemm.com"
>>>> ++[suffix] returns noop
>>>> [eap] EAP packet type response id 7 length 6
>>>> [eap] No EAP Start, assuming it's an on-going EAP conversation
>>>> ++[eap] returns updated
>>>> ++[unix] returns notfound
>>>> [files] users: Matched entry devinder at palettemm.com at line 94
>>>> ++[files] returns ok
>>>> ++[expiration] returns noop
>>>> ++[logintime] returns noop
>>>> ++[pap] returns noop
>>>> Found Auth-Type = EAP
>>>> +- entering group authenticate {...}
>>>> [eap] Request found, released from the list
>>>> [eap] EAP/tls
>>>> [eap] processing type tls
>>>> [tls] Authenticate
>>>> [tls] processing EAP-TLS
>>>> [tls] Received TLS ACK
>>>> [tls] ACK handshake fragment handler
>>>> [tls] eaptls_verify returned 1
>>>> [tls] eaptls_process returned 13
>>>> ++[eap] returns handled
>>>> Sending Access-Challenge of id 49 to 203.121.4.59 port 6001
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 0x1c301a060355040a131350616c65747465204d756c74696d656469612e3125302306092a864886f70d0109011616646576696e6465724070616c657474656d6d2e636f6d311e301c06035504031315436572746966696361746520417574686f726974790e000000
>>>>        Message-Authenticator = 0x00000000000000000000000000000000
>>>>        State = 0x62deb6d566d6bb124f3aa51530d369f1
>>>> Finished request 5.
>>>> Going to the next request
>>>> Waking up in 4.8 seconds.
>>>> rad_recv: Access-Request packet from host 203.121.4.59 port 6001,
>>>> id=50, length=1672
>>>>        User-Name = "devinder at palettemm.com"
>>>>        NAS-IP-Address = 203.121.4.59
>>>>        Called-Station-Id = "00-20-a6-6c-49-9d:palstaff"
>>>>        Calling-Station-Id = "00-04-23-7b-56-b9"
>>>>        NAS-Identifier = "ORiNOCO-AP-700-6c-49-9d"
>>>>        State = 0x62deb6d566d6bb124f3aa51530d369f1
>>>>        Framed-MTU = 1400
>>>>        NAS-Port-Type = Wireless-802.11
>>>>        EAP-Message =
>>>> 0x020805d20dc0000005ee16030105be0b0003ae0003ab0003a8308203a43082028ca003020102020103300d06092a864886f70d010104050030818a310b3009060355040613024d593111300f0603550408130853656c616e676f72311c301a060355040a131350616c65747465204d756c74696d656469612e312330210603550403131a50616c65747465205365727665722043657274696669636174653125302306092a864886f70d0109011616646576696e6465724070616c657474656d6d2e636f6d301e170d3039303830333034313133345a170d3130303830333034313133345a308186310b3009060355040613024d593111300f06035504
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 0x6c7fe5fc510236d68a166fc71dcbc8abe4b7c21c7f41776ae3e89b3afa4134d105d33b10e8caf58fbc23ac07e3fc3b41eeb5abf29cd011dc43b3e05e99f3de81a819e5455ca14b218c86f973485844739388d20dba8af5e894f648b935896fd16fc833ffd3381e2e1a778b83dd9fefe103f647cad570fd94c865135277299307ef0c3ee70a31bbabbaea3021063807100a2e4f6563b1455e663df9ca8b3f73576ce45170280045a18d30b7aed639e99d479536d857ef6b7d44cde521590d6688045ed32a0a524fcfd2926777c53013747fc40d3fd98cf7402550e6d71403010001
>>>>        Message-Authenticator = 0x2d49686ce9585a8543c601ffb006fac4
>>>> +- entering group authorize {...}
>>>> ++[preprocess] returns ok
>>>> ++[chap] returns noop
>>>> ++[mschap] returns noop
>>>> [suffix] Looking up realm "palettemm.com" for User-Name =
>>>> "devinder at palettemm.com"
>>>> [suffix] No such realm "palettemm.com"
>>>> ++[suffix] returns noop
>>>> [eap] EAP packet type response id 8 length 253
>>>> [eap] No EAP Start, assuming it's an on-going EAP conversation
>>>> ++[eap] returns updated
>>>> ++[unix] returns notfound
>>>> [files] users: Matched entry devinder at palettemm.com at line 94
>>>> ++[files] returns ok
>>>> ++[expiration] returns noop
>>>> ++[logintime] returns noop
>>>> ++[pap] returns noop
>>>> Found Auth-Type = EAP
>>>> +- entering group authenticate {...}
>>>> [eap] Request found, released from the list
>>>> [eap] EAP/tls
>>>> [eap] processing type tls
>>>> [tls] Authenticate
>>>> [tls] processing EAP-TLS
>>>>  TLS Length 1518
>>>> [tls] Received EAP-TLS First Fragment of the message
>>>> [tls] eaptls_verify returned 9
>>>> [tls] eaptls_process returned 13
>>>> ++[eap] returns handled
>>>> Sending Access-Challenge of id 50 to 203.121.4.59 port 6001
>>>>        EAP-Message = 0x010900060d00
>>>>        Message-Authenticator = 0x00000000000000000000000000000000
>>>>        State = 0x62deb6d567d7bb124f3aa51530d369f1
>>>> Finished request 6.
>>>> Going to the next request
>>>> Waking up in 4.8 seconds.
>>>> rad_recv: Access-Request packet from host 203.121.4.59 port 6001,
>>>> id=51, length=216
>>>>        User-Name = "devinder at palettemm.com"
>>>>        NAS-IP-Address = 203.121.4.59
>>>>        Called-Station-Id = "00-20-a6-6c-49-9d:palstaff"
>>>>        Calling-Station-Id = "00-04-23-7b-56-b9"
>>>>        NAS-Identifier = "ORiNOCO-AP-700-6c-49-9d"
>>>>        State = 0x62deb6d567d7bb124f3aa51530d369f1
>>>>        Framed-MTU = 1400
>>>>        NAS-Port-Type = Wireless-802.11
>>>>        EAP-Message =
>>>> 0x0209002c0d000116030100204fe855fc95e171b64cf548234edbbba8766c057c55fc938b4e64e30ebdd0e2ab
>>>>        Message-Authenticator = 0x5717c92937ae05e6413b61d5a3ff3004
>>>> +- entering group authorize {...}
>>>> ++[preprocess] returns ok
>>>> ++[chap] returns noop
>>>> ++[mschap] returns noop
>>>> [suffix] Looking up realm "palettemm.com" for User-Name =
>>>> "devinder at palettemm.com"
>>>> [suffix] No such realm "palettemm.com"
>>>> ++[suffix] returns noop
>>>> [eap] EAP packet type response id 9 length 44
>>>> [eap] No EAP Start, assuming it's an on-going EAP conversation
>>>> ++[eap] returns updated
>>>> ++[unix] returns notfound
>>>> [files] users: Matched entry devinder at palettemm.com at line 94
>>>> ++[files] returns ok
>>>> ++[expiration] returns noop
>>>> ++[logintime] returns noop
>>>> ++[pap] returns noop
>>>> Found Auth-Type = EAP
>>>> +- entering group authenticate {...}
>>>> [eap] Request found, released from the list
>>>> [eap] EAP/tls
>>>> [eap] processing type tls
>>>> [tls] Authenticate
>>>> [tls] processing EAP-TLS
>>>> [tls] eaptls_verify returned 7
>>>> [tls] Done initial handshake
>>>> [tls] <<< TLS 1.0 Handshake [length 03b2], Certificate
>>>> --> verify error:num=20:unable to get local issuer certificate
>>>> [tls] >>> TLS 1.0 Alert [length 0002], fatal unknown_ca
>>>> TLS Alert write:fatal:unknown CA
>>>>    TLS_accept:error in SSLv3 read client certificate B
>>>> rlm_eap: SSL error error:140890B2:SSL
>>>> routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned
>>>> SSL: SSL_read failed in a system call (-1), TLS session fails.
>>>> TLS receive handshake failed during operation
>>>> [tls] eaptls_process returned 4
>>>> [eap] Handler failed in EAP/tls
>>>> [eap] Failed in EAP select
>>>> ++[eap] returns invalid
>>>> Failed to authenticate the user.
>>>> Using Post-Auth-Type Reject
>>>> +- entering group REJECT {...}
>>>> [attr_filter.access_reject]     expand: %{User-Name} ->
>>>> devinder at palettemm.com
>>>>  attr_filter: Matched entry DEFAULT at line 11
>>>> ++[attr_filter.access_reject] returns updated
>>>> Delaying reject of request 7 for 1 seconds
>>>> Going to the next request
>>>> Waking up in 0.9 seconds.
>>>> Sending delayed reject for request 7
>>>> Sending Access-Reject of id 51 to 203.121.4.59 port 6001
>>>>        EAP-Message = 0x04090004
>>>>        Message-Authenticator = 0x00000000000000000000000000000000
>>>> Waking up in 3.8 seconds.
>>>> Cleaning up request 1 ID 45 with timestamp +27
>>>> Cleaning up request 2 ID 46 with timestamp +27
>>>> Cleaning up request 3 ID 47 with timestamp +27
>>>> Cleaning up request 4 ID 48 with timestamp +27
>>>> Cleaning up request 5 ID 49 with timestamp +27
>>>> Cleaning up request 6 ID 50 with timestamp +27
>>>> Waking up in 1.0 seconds.
>>>> Cleaning up request 7 ID 51 with timestamp +27
>>>> Ready to process requests.
>>>> rad_recv: Access-Request packet from host 203.121.4.59 port 6001,
>>>> id=52, length=181
>>>>        User-Name = "devinder at palettemm.com"
>>>>        NAS-IP-Address = 203.121.4.59
>>>>        Called-Station-Id = "00-20-a6-6c-49-9d:palstaff"
>>>>        Calling-Station-Id = "00-04-23-7b-56-b9"
>>>>        NAS-Identifier = "ORiNOCO-AP-700-6c-49-9d"
>>>>        Framed-MTU = 1400
>>>>        NAS-Port-Type = Wireless-802.11
>>>>        EAP-Message =
>>>> 0x0201001b01646576696e6465724070616c657474656d6d2e636f6d
>>>>        Message-Authenticator = 0xe5b179ce51b5db29be069ebd7000f412
>>>> +- entering group authorize {...}
>>>> ++[preprocess] returns ok
>>>> ++[chap] returns noop
>>>> ++[mschap] returns noop
>>>> [suffix] Looking up realm "palettemm.com" for User-Name =
>>>> "devinder at palettemm.com"
>>>> [suffix] No such realm "palettemm.com"
>>>> ++[suffix] returns noop
>>>> [eap] EAP packet type response id 1 length 27
>>>> [eap] No EAP Start, assuming it's an on-going EAP conversation
>>>> ++[eap] returns updated
>>>> ++[unix] returns notfound
>>>> [files] users: Matched entry devinder at palettemm.com at line 94
>>>> ++[files] returns ok
>>>> ++[expiration] returns noop
>>>> ++[logintime] returns noop
>>>> [pap] WARNING! No "known good" password found for the user.
>>>> Authentication may fail because of this.
>>>> ++[pap] returns noop
>>>> Found Auth-Type = EAP
>>>> +- entering group authenticate {...}
>>>> [eap] EAP Identity
>>>> [eap] processing type md5
>>>> rlm_eap_md5: Issuing Challenge
>>>> ++[eap] returns handled
>>>> Sending Access-Challenge of id 52 to 203.121.4.59 port 6001
>>>>        EAP-Message = 0x0102001604108195b49b704b8992bd4258cf70513300
>>>>        Message-Authenticator = 0x00000000000000000000000000000000
>>>>        State = 0x92094dc4920b49c63e9e9d887da9f2ad
>>>> Finished request 8.
>>>> Going to the next request
>>>> Waking up in 4.9 seconds.
>>>> rad_recv: Access-Request packet from host 203.121.4.59 port 6001,
>>>> id=53, length=178
>>>>        User-Name = "devinder at palettemm.com"
>>>>        NAS-IP-Address = 203.121.4.59
>>>>        Called-Station-Id = "00-20-a6-6c-49-9d:palstaff"
>>>>        Calling-Station-Id = "00-04-23-7b-56-b9"
>>>>        NAS-Identifier = "ORiNOCO-AP-700-6c-49-9d"
>>>>        State = 0x92094dc4920b49c63e9e9d887da9f2ad
>>>>        Framed-MTU = 1400
>>>>        NAS-Port-Type = Wireless-802.11
>>>>        EAP-Message = 0x02020006030d
>>>>        Message-Authenticator = 0x22eb6a82d37f5eafd5ba8a5abc81f834
>>>> +- entering group authorize {...}
>>>> ++[preprocess] returns ok
>>>> ++[chap] returns noop
>>>> ++[mschap] returns noop
>>>> [suffix] Looking up realm "palettemm.com" for User-Name =
>>>> "devinder at palettemm.com"
>>>> [suffix] No such realm "palettemm.com"
>>>> ++[suffix] returns noop
>>>> [eap] EAP packet type response id 2 length 6
>>>> [eap] No EAP Start, assuming it's an on-going EAP conversation
>>>> ++[eap] returns updated
>>>> ++[unix] returns notfound
>>>> [files] users: Matched entry devinder at palettemm.com at line 94
>>>> ++[files] returns ok
>>>> ++[expiration] returns noop
>>>> ++[logintime] returns noop
>>>> [pap] WARNING! No "known good" password found for the user.
>>>> Authentication may fail because of this.
>>>> ++[pap] returns noop
>>>> Found Auth-Type = EAP
>>>> +- entering group authenticate {...}
>>>> [eap] Request found, released from the list
>>>> [eap] EAP NAK
>>>> [eap] EAP-NAK asked for EAP-Type/tls
>>>> [eap] processing type tls
>>>> [tls] Requiring client certificate
>>>> [tls] Initiate
>>>> [tls] Start returned 1
>>>> ++[eap] returns handled
>>>> Sending Access-Challenge of id 53 to 203.121.4.59 port 6001
>>>>        EAP-Message = 0x010300060d20
>>>>        Message-Authenticator = 0x00000000000000000000000000000000
>>>>        State = 0x92094dc4930a40c63e9e9d887da9f2ad
>>>> Finished request 9.
>>>> Going to the next request
>>>> Waking up in 4.9 seconds.
>>>> rad_recv: Access-Request packet from host 203.121.4.59 port 6001,
>>>> id=54, length=252
>>>>        User-Name = "devinder at palettemm.com"
>>>>        NAS-IP-Address = 203.121.4.59
>>>>        Called-Station-Id = "00-20-a6-6c-49-9d:palstaff"
>>>>        Calling-Station-Id = "00-04-23-7b-56-b9"
>>>>        NAS-Identifier = "ORiNOCO-AP-700-6c-49-9d"
>>>>        State = 0x92094dc4930a40c63e9e9d887da9f2ad
>>>>        Framed-MTU = 1400
>>>>        NAS-Port-Type = Wireless-802.11
>>>>        EAP-Message =
>>>> 0x020300500d800000004616030100410100003d03014a7794cc001bbe59615bb39e4e9a325ca1fd23210fdba327dda3ff227b9e03b400001600040005000a000900640062000300060013001200630100
>>>>        Message-Authenticator = 0xb50e7a762392b806ee2162fc3a3e13b7
>>>> +- entering group authorize {...}
>>>> ++[preprocess] returns ok
>>>> ++[chap] returns noop
>>>> ++[mschap] returns noop
>>>> [suffix] Looking up realm "palettemm.com" for User-Name =
>>>> "devinder at palettemm.com"
>>>> [suffix] No such realm "palettemm.com"
>>>> ++[suffix] returns noop
>>>> [eap] EAP packet type response id 3 length 80
>>>> [eap] No EAP Start, assuming it's an on-going EAP conversation
>>>> ++[eap] returns updated
>>>> ++[unix] returns notfound
>>>> [files] users: Matched entry devinder at palettemm.com at line 94
>>>> ++[files] returns ok
>>>> ++[expiration] returns noop
>>>> ++[logintime] returns noop
>>>> ++[pap] returns noop
>>>> Found Auth-Type = EAP
>>>> +- entering group authenticate {...}
>>>> [eap] Request found, released from the list
>>>> [eap] EAP/tls
>>>> [eap] processing type tls
>>>> [tls] Authenticate
>>>> [tls] processing EAP-TLS
>>>>  TLS Length 70
>>>> [tls] Length Included
>>>> [tls] eaptls_verify returned 11
>>>> [tls]     (other): before/accept initialization
>>>> [tls]     TLS_accept: before/accept initialization
>>>> [tls] <<< TLS 1.0 Handshake [length 0041], ClientHello
>>>> [tls]     TLS_accept: SSLv3 read client hello A
>>>> [tls] >>> TLS 1.0 Handshake [length 002a], ServerHello
>>>> [tls]     TLS_accept: SSLv3 write server hello A
>>>> [tls] >>> TLS 1.0 Handshake [length 0869], Certificate
>>>> [tls]     TLS_accept: SSLv3 write certificate A
>>>> [tls] >>> TLS 1.0 Handshake [length 00a5], CertificateRequest
>>>> [tls]     TLS_accept: SSLv3 write certificate request A
>>>> [tls]     TLS_accept: SSLv3 flush data
>>>> [tls]     TLS_accept: Need to read more data: SSLv3 read client
>>>> certificate A
>>>> In SSL Handshake Phase
>>>> In SSL Accept mode
>>>> [tls] eaptls_process returned 13
>>>> ++[eap] returns handled
>>>> Sending Access-Challenge of id 54 to 203.121.4.59 port 6001
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message = 0x5cfc17ff37dd97490004a830
>>>>        Message-Authenticator = 0x00000000000000000000000000000000
>>>>        State = 0x92094dc4900d40c63e9e9d887da9f2ad
>>>> Finished request 10.
>>>> Going to the next request
>>>> Waking up in 4.9 seconds.
>>>> rad_recv: Access-Request packet from host 203.121.4.59 port 6001,
>>>> id=55, length=178
>>>>        User-Name = "devinder at palettemm.com"
>>>>        NAS-IP-Address = 203.121.4.59
>>>>        Called-Station-Id = "00-20-a6-6c-49-9d:palstaff"
>>>>        Calling-Station-Id = "00-04-23-7b-56-b9"
>>>>        NAS-Identifier = "ORiNOCO-AP-700-6c-49-9d"
>>>>        State = 0x92094dc4900d40c63e9e9d887da9f2ad
>>>>        Framed-MTU = 1400
>>>>        NAS-Port-Type = Wireless-802.11
>>>>        EAP-Message = 0x020400060d00
>>>>        Message-Authenticator = 0x3f1612c468a749f2d7be889ece43af04
>>>> +- entering group authorize {...}
>>>> ++[preprocess] returns ok
>>>> ++[chap] returns noop
>>>> ++[mschap] returns noop
>>>> [suffix] Looking up realm "palettemm.com" for User-Name =
>>>> "devinder at palettemm.com"
>>>> [suffix] No such realm "palettemm.com"
>>>> ++[suffix] returns noop
>>>> [eap] EAP packet type response id 4 length 6
>>>> [eap] No EAP Start, assuming it's an on-going EAP conversation
>>>> ++[eap] returns updated
>>>> ++[unix] returns notfound
>>>> [files] users: Matched entry devinder at palettemm.com at line 94
>>>> ++[files] returns ok
>>>> ++[expiration] returns noop
>>>> ++[logintime] returns noop
>>>> ++[pap] returns noop
>>>> Found Auth-Type = EAP
>>>> +- entering group authenticate {...}
>>>> [eap] Request found, released from the list
>>>> [eap] EAP/tls
>>>> [eap] processing type tls
>>>> [tls] Authenticate
>>>> [tls] processing EAP-TLS
>>>> [tls] Received TLS ACK
>>>> [tls] ACK handshake fragment handler
>>>> [tls] eaptls_verify returned 1
>>>> [tls] eaptls_process returned 13
>>>> ++[eap] returns handled
>>>> Sending Access-Challenge of id 55 to 203.121.4.59 port 6001
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 0x08130853656c616e676f72310b300906035504071302504a311c301a060355040a131350616c65747465204d756c74696d656469612e3125302306092a864886f70d0109011616646576696e6465724070616c657474656d6d2e636f6d311e301c06035504031315436572746966696361746520417574686f7269747930820122300d06092a864886f70d01010105000382010f003082010a0282010100d42cbdfb9a6f9ceb5fbe99e32d62d9a6a8760e64b5a0026a45d42acac8d8de68009e3717cd35944d4030c9c85c2d95c9e75761a32c45adf3bec3c60b5a5f6dfdc622b70d486c407a54665d5ff58f74a5743f2e063aaa6d8d298169e792d370
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message = 0x72d0f2c8ef880796a48a4639
>>>>        Message-Authenticator = 0x00000000000000000000000000000000
>>>>        State = 0x92094dc4910c40c63e9e9d887da9f2ad
>>>> Finished request 11.
>>>> Going to the next request
>>>> Waking up in 4.9 seconds.
>>>> rad_recv: Access-Request packet from host 203.121.4.59 port 6001,
>>>> id=56, length=178
>>>>        User-Name = "devinder at palettemm.com"
>>>>        NAS-IP-Address = 203.121.4.59
>>>>        Called-Station-Id = "00-20-a6-6c-49-9d:palstaff"
>>>>        Calling-Station-Id = "00-04-23-7b-56-b9"
>>>>        NAS-Identifier = "ORiNOCO-AP-700-6c-49-9d"
>>>>        State = 0x92094dc4910c40c63e9e9d887da9f2ad
>>>>        Framed-MTU = 1400
>>>>        NAS-Port-Type = Wireless-802.11
>>>>        EAP-Message = 0x020500060d00
>>>>        Message-Authenticator = 0x9c8cc7715cfe14bc2ed6f2b8655c0220
>>>> +- entering group authorize {...}
>>>> ++[preprocess] returns ok
>>>> ++[chap] returns noop
>>>> ++[mschap] returns noop
>>>> [suffix] Looking up realm "palettemm.com" for User-Name =
>>>> "devinder at palettemm.com"
>>>> [suffix] No such realm "palettemm.com"
>>>> ++[suffix] returns noop
>>>> [eap] EAP packet type response id 5 length 6
>>>> [eap] No EAP Start, assuming it's an on-going EAP conversation
>>>> ++[eap] returns updated
>>>> ++[unix] returns notfound
>>>> [files] users: Matched entry devinder at palettemm.com at line 94
>>>> ++[files] returns ok
>>>> ++[expiration] returns noop
>>>> ++[logintime] returns noop
>>>> ++[pap] returns noop
>>>> Found Auth-Type = EAP
>>>> +- entering group authenticate {...}
>>>> [eap] Request found, released from the list
>>>> [eap] EAP/tls
>>>> [eap] processing type tls
>>>> [tls] Authenticate
>>>> [tls] processing EAP-TLS
>>>> [tls] Received TLS ACK
>>>> [tls] ACK handshake fragment handler
>>>> [tls] eaptls_verify returned 1
>>>> [tls] eaptls_process returned 13
>>>> ++[eap] returns handled
>>>> Sending Access-Challenge of id 56 to 203.121.4.59 port 6001
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 0x1c301a060355040a131350616c65747465204d756c74696d656469612e3125302306092a864886f70d0109011616646576696e6465724070616c657474656d6d2e636f6d311e301c06035504031315436572746966696361746520417574686f726974790e000000
>>>>        Message-Authenticator = 0x00000000000000000000000000000000
>>>>        State = 0x92094dc4960f40c63e9e9d887da9f2ad
>>>> Finished request 12.
>>>> Going to the next request
>>>> Waking up in 4.9 seconds.
>>>> rad_recv: Access-Request packet from host 203.121.4.59 port 6001,
>>>> id=57, length=1672
>>>>        User-Name = "devinder at palettemm.com"
>>>>        NAS-IP-Address = 203.121.4.59
>>>>        Called-Station-Id = "00-20-a6-6c-49-9d:palstaff"
>>>>        Calling-Station-Id = "00-04-23-7b-56-b9"
>>>>        NAS-Identifier = "ORiNOCO-AP-700-6c-49-9d"
>>>>        State = 0x92094dc4960f40c63e9e9d887da9f2ad
>>>>        Framed-MTU = 1400
>>>>        NAS-Port-Type = Wireless-802.11
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 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
>>>>        EAP-Message =
>>>> 0xaf27fdcfbeafc8da935c1df948d31300498f3eb96fed62f79734f7d016d83b69ce34e915cc6fac754c46169c33ff6a102712fbb61bb44201a5a60b1317b06bcd72c5fe9650d302d6c66e4b670f41c26aa4f38f1519a0071f1c6352f05fe85bdaa2eb7f90833d667877a5e4e9c6b36bdfe219659aa3c3c439ff304f10947da32aeecd1ab25cc553653d1a4260771906ac181160cb64f464391f33a50c8b93225ebae4b9d40cb737890946c9f3de7a696396a71393e3a9919279a216f5dc7f665be50965f0dda21a4482ce44dcb92c0de1310fc1af9b3ab0e2e71547661403010001
>>>>        Message-Authenticator = 0x3c5c56dd8206e86f40fc58199cff01bd
>>>> +- entering group authorize {...}
>>>> ++[preprocess] returns ok
>>>> ++[chap] returns noop
>>>> ++[mschap] returns noop
>>>> [suffix] Looking up realm "palettemm.com" for User-Name =
>>>> "devinder at palettemm.com"
>>>> [suffix] No such realm "palettemm.com"
>>>> ++[suffix] returns noop
>>>> [eap] EAP packet type response id 6 length 253
>>>> [eap] No EAP Start, assuming it's an on-going EAP conversation
>>>> ++[eap] returns updated
>>>> ++[unix] returns notfound
>>>> [files] users: Matched entry devinder at palettemm.com at line 94
>>>> ++[files] returns ok
>>>> ++[expiration] returns noop
>>>> ++[logintime] returns noop
>>>> ++[pap] returns noop
>>>> Found Auth-Type = EAP
>>>> +- entering group authenticate {...}
>>>> [eap] Request found, released from the list
>>>> [eap] EAP/tls
>>>> [eap] processing type tls
>>>> [tls] Authenticate
>>>> [tls] processing EAP-TLS
>>>>  TLS Length 1518
>>>> [tls] Received EAP-TLS First Fragment of the message
>>>> [tls] eaptls_verify returned 9
>>>> [tls] eaptls_process returned 13
>>>> ++[eap] returns handled
>>>> Sending Access-Challenge of id 57 to 203.121.4.59 port 6001
>>>>        EAP-Message = 0x010700060d00
>>>>        Message-Authenticator = 0x00000000000000000000000000000000
>>>>        State = 0x92094dc4970e40c63e9e9d887da9f2ad
>>>> Finished request 13.
>>>> Going to the next request
>>>> Waking up in 4.8 seconds.
>>>> rad_recv: Access-Request packet from host 203.121.4.59 port 6001,
>>>> id=58, length=216
>>>>        User-Name = "devinder at palettemm.com"
>>>>        NAS-IP-Address = 203.121.4.59
>>>>        Called-Station-Id = "00-20-a6-6c-49-9d:palstaff"
>>>>        Calling-Station-Id = "00-04-23-7b-56-b9"
>>>>        NAS-Identifier = "ORiNOCO-AP-700-6c-49-9d"
>>>>        State = 0x92094dc4970e40c63e9e9d887da9f2ad
>>>>        Framed-MTU = 1400
>>>>        NAS-Port-Type = Wireless-802.11
>>>>        EAP-Message =
>>>> 0x0207002c0d000116030100206a37ffeef11849b1d0a6d9ef7e63012b68850674c5863fe770d7f04338d6e235
>>>>        Message-Authenticator = 0xcfa5e7a49f8af947020ce3ea3cef21eb
>>>> +- entering group authorize {...}
>>>> ++[preprocess] returns ok
>>>> ++[chap] returns noop
>>>> ++[mschap] returns noop
>>>> [suffix] Looking up realm "palettemm.com" for User-Name =
>>>> "devinder at palettemm.com"
>>>> [suffix] No such realm "palettemm.com"
>>>> ++[suffix] returns noop
>>>> [eap] EAP packet type response id 7 length 44
>>>> [eap] No EAP Start, assuming it's an on-going EAP conversation
>>>> ++[eap] returns updated
>>>> ++[unix] returns notfound
>>>> [files] users: Matched entry devinder at palettemm.com at line 94
>>>> ++[files] returns ok
>>>> ++[expiration] returns noop
>>>> ++[logintime] returns noop
>>>> ++[pap] returns noop
>>>> Found Auth-Type = EAP
>>>> +- entering group authenticate {...}
>>>> [eap] Request found, released from the list
>>>> [eap] EAP/tls
>>>> [eap] processing type tls
>>>> [tls] Authenticate
>>>> [tls] processing EAP-TLS
>>>> [tls] eaptls_verify returned 7
>>>> [tls] Done initial handshake
>>>> [tls] <<< TLS 1.0 Handshake [length 03b2], Certificate
>>>> --> verify error:num=20:unable to get local issuer certificate
>>>> [tls] >>> TLS 1.0 Alert [length 0002], fatal unknown_ca
>>>> TLS Alert write:fatal:unknown CA
>>>>    TLS_accept:error in SSLv3 read client certificate B
>>>> rlm_eap: SSL error error:140890B2:SSL
>>>> routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned
>>>> SSL: SSL_read failed in a system call (-1), TLS session fails.
>>>> TLS receive handshake failed during operation
>>>> [tls] eaptls_process returned 4
>>>> [eap] Handler failed in EAP/tls
>>>> [eap] Failed in EAP select
>>>> ++[eap] returns invalid
>>>> Failed to authenticate the user.
>>>> Using Post-Auth-Type Reject
>>>> +- entering group REJECT {...}
>>>> [attr_filter.access_reject]     expand: %{User-Name} ->
>>>> devinder at palettemm.com
>>>>  attr_filter: Matched entry DEFAULT at line 11
>>>> ++[attr_filter.access_reject] returns updated
>>>> Delaying reject of request 14 for 1 seconds
>>>> Going to the next request
>>>> Waking up in 0.9 seconds.
>>>> Sending delayed reject for request 14
>>>> Sending Access-Reject of id 58 to 203.121.4.59 port 6001
>>>>        EAP-Message = 0x04070004
>>>>        Message-Authenticator = 0x00000000000000000000000000000000
>>>> Waking up in 3.8 seconds.
>>>> Cleaning up request 8 ID 52 with timestamp +164
>>>> Cleaning up request 9 ID 53 with timestamp +164
>>>> Cleaning up request 10 ID 54 with timestamp +164
>>>> Cleaning up request 11 ID 55 with timestamp +164
>>>> Cleaning up request 12 ID 56 with timestamp +164
>>>> Cleaning up request 13 ID 57 with timestamp +165
>>>> Waking up in 1.0 seconds.
>>>> Cleaning up request 14 ID 58 with timestamp +165
>>>> Ready to process requests.
>>>> ^C
>>>> linux-h9qt:/etc/raddb # clear
>>>> linux-h9qt:/etc/raddb # radiusd -X
>>>> FreeRADIUS Version 2.1.1, for host x86_64-suse-linux-gnu, built on Dec
>>>>  3 2008 at 13:57:16
>>>> Copyright (C) 1999-2008 The FreeRADIUS server project and
>>>> contributors.
>>>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>>>> PARTICULAR PURPOSE.
>>>> You may redistribute copies of FreeRADIUS under the terms of the
>>>> GNU General Public License v2.
>>>> Starting - reading configuration files ...
>>>> including configuration file /etc/raddb/radiusd.conf
>>>> including configuration file /etc/raddb/proxy.conf
>>>> including configuration file /etc/raddb/clients.conf
>>>> including files in directory /etc/raddb/modules/
>>>> including configuration file /etc/raddb/modules/wimax
>>>> including configuration file /etc/raddb/modules/ippool
>>>> including configuration file /etc/raddb/modules/expiration
>>>> including configuration file /etc/raddb/modules/inner-eap
>>>> including configuration file /etc/raddb/modules/exec
>>>> including configuration file /etc/raddb/modules/mac2ip
>>>> including configuration file /etc/raddb/modules/krb5
>>>> including configuration file /etc/raddb/modules/logintime
>>>> including configuration file /etc/raddb/modules/detail
>>>> including configuration file /etc/raddb/modules/digest
>>>> including configuration file /etc/raddb/modules/etc_group
>>>> including configuration file /etc/raddb/modules/sql_log
>>>> including configuration file /etc/raddb/modules/attr_filter
>>>> including configuration file /etc/raddb/modules/always
>>>> including configuration file /etc/raddb/modules/ldap
>>>> including configuration file /etc/raddb/modules/files
>>>> including configuration file /etc/raddb/modules/detail.log
>>>> including configuration file /etc/raddb/modules/radutmp
>>>> including configuration file /etc/raddb/modules/preprocess
>>>> including configuration file /etc/raddb/modules/realm
>>>> including configuration file /etc/raddb/modules/sradutmp
>>>> including configuration file /etc/raddb/modules/policy
>>>> including configuration file /etc/raddb/modules/linelog
>>>> including configuration file /etc/raddb/modules/counter
>>>> including configuration file /etc/raddb/modules/smbpasswd
>>>> including configuration file /etc/raddb/modules/expr
>>>> including configuration file /etc/raddb/modules/mac2vlan
>>>> including configuration file /etc/raddb/modules/checkval
>>>> including configuration file /etc/raddb/modules/unix
>>>> including configuration file /etc/raddb/modules/pam
>>>> including configuration file /etc/raddb/modules/echo
>>>> including configuration file /etc/raddb/modules/passwd
>>>> including configuration file /etc/raddb/modules/mschap
>>>> including configuration file /etc/raddb/modules/detail.example.com
>>>> including configuration file /etc/raddb/modules/acct_unique
>>>> including configuration file /etc/raddb/modules/attr_rewrite
>>>> including configuration file /etc/raddb/modules/chap
>>>> including configuration file /etc/raddb/modules/pap
>>>> including configuration file /etc/raddb/eap.conf
>>>> including configuration file /etc/raddb/sql.conf
>>>> including configuration file /etc/raddb/sql/mysql/dialup.conf
>>>> including configuration file /etc/raddb/sql/mysql/counter.conf
>>>> including configuration file /etc/raddb/policy.conf
>>>> including files in directory /etc/raddb/sites-enabled/
>>>> including configuration file /etc/raddb/sites-enabled/default
>>>> including configuration file /etc/raddb/sites-enabled/inner-tunnel
>>>> group = radiusd
>>>> user = radiusd
>>>> including dictionary file /etc/raddb/dictionary
>>>> main {
>>>>        prefix = "/usr"
>>>>        localstatedir = "/var"
>>>>        logdir = "/var/log/radius"
>>>>        libdir = "/usr/lib64/freeradius"
>>>>        radacctdir = "/var/log/radius/radacct"
>>>>        hostname_lookups = no
>>>>        max_request_time = 30
>>>>        cleanup_delay = 5
>>>>        max_requests = 1024
>>>>        allow_core_dumps = no
>>>>        pidfile = "/var/run/radiusd/radiusd.pid"
>>>>        checkrad = "/usr/sbin/checkrad"
>>>>        debug_level = 0
>>>>        proxy_requests = yes
>>>>  log {
>>>>        stripped_names = no
>>>>        auth = no
>>>>        auth_badpass = no
>>>>        auth_goodpass = no
>>>>  }
>>>>  security {
>>>>        max_attributes = 200
>>>>        reject_delay = 1
>>>>        status_server = yes
>>>>  }
>>>> }
>>>>  client localhost {
>>>>        ipaddr = 127.0.0.1
>>>>        require_message_authenticator = no
>>>>        secret = "testing123"
>>>>        nastype = "other"
>>>>  }
>>>>  client 192.168.1.0/24 {
>>>>        require_message_authenticator = no
>>>>        secret = "testing123-1"
>>>>        shortname = "private-network-1"
>>>>  }
>>>>  client 203.121.4.11 {
>>>>        require_message_authenticator = no
>>>>        secret = "testing123-1"
>>>>        shortname = "private-network3"
>>>>  }
>>>>  client 203.121.4.59 {
>>>>        require_message_authenticator = no
>>>>        secret = "testing123-1"
>>>>        shortname = "Proxim-700"
>>>>        nastype = "other"
>>>>  }
>>>> radiusd: #### Loading Realms and Home Servers ####
>>>>  proxy server {
>>>>        retry_delay = 5
>>>>        retry_count = 3
>>>>        default_fallback = no
>>>>        dead_time = 120
>>>>        wake_all_if_all_dead = no
>>>>  }
>>>>  home_server localhost {
>>>>        ipaddr = 127.0.0.1
>>>>        port = 1812
>>>>        type = "auth"
>>>>        secret = "testing123"
>>>>        response_window = 20
>>>>        max_outstanding = 65536
>>>>        zombie_period = 40
>>>>        status_check = "status-server"
>>>>        ping_interval = 30
>>>>        check_interval = 30
>>>>        num_answers_to_alive = 3
>>>>        num_pings_to_alive = 3
>>>>        revive_interval = 120
>>>>        status_check_timeout = 4
>>>>  }
>>>>  home_server_pool my_auth_failover {
>>>>        type = fail-over
>>>>        home_server = localhost
>>>>  }
>>>>  realm example.com {
>>>>        auth_pool = my_auth_failover
>>>>  }
>>>>  realm LOCAL {
>>>>  }
>>>> radiusd: #### Instantiating modules ####
>>>>  instantiate {
>>>>  Module: Linked to module rlm_exec
>>>>  Module: Instantiating exec
>>>>  exec {
>>>>        wait = no
>>>>        input_pairs = "request"
>>>>        shell_escape = yes
>>>>  }
>>>>  Module: Linked to module rlm_expr
>>>>  Module: Instantiating expr
>>>>  Module: Linked to module rlm_expiration
>>>>  Module: Instantiating expiration
>>>>  expiration {
>>>>        reply-message = "Password Has Expired  "
>>>>  }
>>>>  Module: Linked to module rlm_logintime
>>>>  Module: Instantiating logintime
>>>>  logintime {
>>>>        reply-message = "You are calling outside your allowed timespan
>>>>  "
>>>>        minimum-timeout = 60
>>>>  }
>>>>  }
>>>> radiusd: #### Loading Virtual Servers ####
>>>> server inner-tunnel {
>>>>  modules {
>>>>  Module: Checking authenticate {...} for more modules to load
>>>>  Module: Linked to module rlm_pap
>>>>  Module: Instantiating pap
>>>>  pap {
>>>>        encryption_scheme = "auto"
>>>>        auto_header = no
>>>>  }
>>>>  Module: Linked to module rlm_chap
>>>>  Module: Instantiating chap
>>>>  Module: Linked to module rlm_mschap
>>>>  Module: Instantiating mschap
>>>>  mschap {
>>>>        use_mppe = yes
>>>>        require_encryption = no
>>>>        require_strong = no
>>>>        with_ntdomain_hack = no
>>>>  }
>>>>  Module: Linked to module rlm_unix
>>>>  Module: Instantiating unix
>>>>  unix {
>>>>        radwtmp = "/var/log/radius/radwtmp"
>>>>  }
>>>>  Module: Linked to module rlm_eap
>>>>  Module: Instantiating eap
>>>>  eap {
>>>>        default_eap_type = "md5"
>>>>        timer_expire = 60
>>>>        ignore_unknown_eap_types = no
>>>>        cisco_accounting_username_bug = no
>>>>        max_sessions = 2048
>>>>  }
>>>>  Module: Linked to sub-module rlm_eap_md5
>>>>  Module: Instantiating eap-md5
>>>>  Module: Linked to sub-module rlm_eap_leap
>>>>  Module: Instantiating eap-leap
>>>>  Module: Linked to sub-module rlm_eap_gtc
>>>>  Module: Instantiating eap-gtc
>>>>   gtc {
>>>>        challenge = "Password: "
>>>>        auth_type = "PAP"
>>>>   }
>>>>  Module: Linked to sub-module rlm_eap_tls
>>>>  Module: Instantiating eap-tls
>>>>   tls {
>>>>        rsa_key_exchange = no
>>>>        dh_key_exchange = yes
>>>>        rsa_key_length = 512
>>>>        dh_key_length = 512
>>>>        verify_depth = 0
>>>>        pem_file_type = yes
>>>>        private_key_file = "/etc/raddb/certs/server.pem"
>>>>        certificate_file = "/etc/raddb/certs/server.pem"
>>>>        CA_file = "/etc/raddb/certs/ca.pem"
>>>>        private_key_password = "devin123"
>>>>        dh_file = "/etc/raddb/certs/dh"
>>>>        random_file = "/etc/raddb/certs/random"
>>>>        fragment_size = 1024
>>>>        include_length = yes
>>>>        check_crl = no
>>>>        cipher_list = "DEFAULT"
>>>>        make_cert_command = "/etc/raddb/certs/bootstrap"
>>>>    cache {
>>>>        enable = no
>>>>        lifetime = 24
>>>>        max_entries = 255
>>>>    }
>>>>   }
>>>>  Module: Linked to sub-module rlm_eap_ttls
>>>>  Module: Instantiating eap-ttls
>>>>   ttls {
>>>>        default_eap_type = "md5"
>>>>        copy_request_to_tunnel = no
>>>>        use_tunneled_reply = no
>>>>        virtual_server = "inner-tunnel"
>>>>   }
>>>>  Module: Linked to sub-module rlm_eap_peap
>>>>  Module: Instantiating eap-peap
>>>>   peap {
>>>>        default_eap_type = "mschapv2"
>>>>        copy_request_to_tunnel = no
>>>>        use_tunneled_reply = no
>>>>        proxy_tunneled_request_as_eap = yes
>>>>        virtual_server = "inner-tunnel"
>>>>   }
>>>>  Module: Linked to sub-module rlm_eap_mschapv2
>>>>  Module: Instantiating eap-mschapv2
>>>>   mschapv2 {
>>>>        with_ntdomain_hack = no
>>>>   }
>>>>  Module: Checking authorize {...} for more modules to load
>>>>  Module: Linked to module rlm_realm
>>>>  Module: Instantiating suffix
>>>>  realm suffix {
>>>>        format = "suffix"
>>>>        delimiter = "@"
>>>>        ignore_default = no
>>>>        ignore_null = no
>>>>  }
>>>>  Module: Linked to module rlm_files
>>>>  Module: Instantiating files
>>>>  files {
>>>>        usersfile = "/etc/raddb/users"
>>>>        acctusersfile = "/etc/raddb/acct_users"
>>>>        preproxy_usersfile = "/etc/raddb/preproxy_users"
>>>>        compat = "no"
>>>>  }
>>>>  Module: Checking session {...} for more modules to load
>>>>  Module: Linked to module rlm_radutmp
>>>>  Module: Instantiating radutmp
>>>>  radutmp {
>>>>        filename = "/var/log/radius/radutmp"
>>>>        username = "%{User-Name}"
>>>>        case_sensitive = yes
>>>>        check_with_nas = yes
>>>>        perm = 384
>>>>        callerid = yes
>>>>  }
>>>>  Module: Checking post-proxy {...} for more modules to load
>>>>  Module: Checking post-auth {...} for more modules to load
>>>>  Module: Linked to module rlm_attr_filter
>>>>  Module: Instantiating attr_filter.access_reject
>>>>  attr_filter attr_filter.access_reject {
>>>>        attrsfile = "/etc/raddb/attrs.access_reject"
>>>>        key = "%{User-Name}"
>>>>  }
>>>>  }
>>>> }
>>>>  modules {
>>>>  Module: Checking authenticate {...} for more modules to load
>>>>  Module: Checking authorize {...} for more modules to load
>>>>  Module: Linked to module rlm_preprocess
>>>>  Module: Instantiating preprocess
>>>>  preprocess {
>>>>        huntgroups = "/etc/raddb/huntgroups"
>>>>        hints = "/etc/raddb/hints"
>>>>        with_ascend_hack = no
>>>>        ascend_channels_per_line = 23
>>>>        with_ntdomain_hack = no
>>>>        with_specialix_jetstream_hack = no
>>>>        with_cisco_vsa_hack = no
>>>>        with_alvarion_vsa_hack = no
>>>>  }
>>>>  Module: Checking preacct {...} for more modules to load
>>>>  Module: Linked to module rlm_acct_unique
>>>>  Module: Instantiating acct_unique
>>>>  acct_unique {
>>>>        key = "User-Name, Acct-Session-Id, NAS-IP-Address,
>>>> Client-IP-Address, NAS-Port"
>>>>  }
>>>>  Module: Checking accounting {...} for more modules to load
>>>>  Module: Linked to module rlm_detail
>>>>  Module: Instantiating detail
>>>>  detail {
>>>>        detailfile =
>>>> "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
>>>>        header = "%t"
>>>>        detailperm = 384
>>>>        dirperm = 493
>>>>        locking = no
>>>>        log_packet_header = no
>>>>  }
>>>>  Module: Instantiating attr_filter.accounting_response
>>>>  attr_filter attr_filter.accounting_response {
>>>>        attrsfile = "/etc/raddb/attrs.accounting_response"
>>>>        key = "%{User-Name}"
>>>>  }
>>>>  Module: Checking session {...} for more modules to load
>>>>  Module: Checking post-proxy {...} for more modules to load
>>>>  Module: Checking post-auth {...} for more modules to load
>>>>  }
>>>> radiusd: #### Opening IP addresses and Ports ####
>>>> listen {
>>>>        type = "auth"
>>>>        ipaddr = *
>>>>        port = 0
>>>> }
>>>> listen {
>>>>        type = "acct"
>>>>        ipaddr = *
>>>>        port = 0
>>>> }
>>>> Listening on authentication address * port 1812
>>>> Listening on accounting address * port 1813
>>>> Listening on proxy address * port 1814
>>>> Ready to process requests.
>>>>
>>>>
>>>>
>>>> 2009/8/4 Devinder Singh <devinbhullar at gmail.com>:
>>>>> Hi Ivan,
>>>>>
>>>>> When i clik on my SSID palstaff it prompts for the certificate name
>>>>>
>>>>> username on certificate so i selected
>>>>>
>>>>> devinder at palettemm.com
>>>>>
>>>>> Click OK then authentication failed on the SSID
>>>>>
>>>>> 2009/8/4 Devinder Singh <devinbhullar at gmail.com>:
>>>>>> Hi Ivan
>>>>>>
>>>>>> Ok i managed to install ca.der and client.p12 on my XP
>>>>>>
>>>>>> When i run radiusd -X i get
>>>>>>
>>>>>> rad_recv: Access-Request packet from host 203.121.4.59 port 6001,
>>>>>> id=30, length=216
>>>>>>        User-Name = "devinder at palettemm.com"
>>>>>>        NAS-IP-Address = 203.121.4.59
>>>>>>        Called-Station-Id = "00-20-a6-6c-49-9d:palstaff"
>>>>>>        Calling-Station-Id = "00-04-23-7b-56-b9"
>>>>>>        NAS-Identifier = "ORiNOCO-AP-700-6c-49-9d"
>>>>>>        State = 0xf30ae66df60debd09c91249e7b82f0a9
>>>>>>        Framed-MTU = 1400
>>>>>>        NAS-Port-Type = Wireless-802.11
>>>>>>        EAP-Message =
>>>>>> 0x0207002c0d000116030100205a6f866d20eb642ddc9f404f90d8650422eb751e7bb0199a016bb14e384df6fa
>>>>>>        Message-Authenticator = 0x06206416bbe520db012eb924f72ba75e
>>>>>> +- entering group authorize {...}
>>>>>> ++[preprocess] returns ok
>>>>>> ++[chap] returns noop
>>>>>> ++[mschap] returns noop
>>>>>> [suffix] Looking up realm "palettemm.com" for User-Name =
>>>>>> "devinder at palettemm.com"
>>>>>> [suffix] No such realm "palettemm.com"
>>>>>> ++[suffix] returns noop
>>>>>> [eap] EAP packet type response id 7 length 44
>>>>>> [eap] No EAP Start, assuming it's an on-going EAP conversation
>>>>>> ++[eap] returns updated
>>>>>> ++[unix] returns notfound
>>>>>> [files] users: Matched entry devinder at palettemm.com at line 94
>>>>>> ++[files] returns ok
>>>>>> ++[expiration] returns noop
>>>>>> ++[logintime] returns noop
>>>>>> ++[pap] returns noop
>>>>>> Found Auth-Type = EAP
>>>>>> +- entering group authenticate {...}
>>>>>> [eap] Request found, released from the list
>>>>>> [eap] EAP/tls
>>>>>> [eap] processing type tls
>>>>>> [tls] Authenticate
>>>>>> [tls] processing EAP-TLS
>>>>>> [tls] eaptls_verify returned 7
>>>>>> [tls] Done initial handshake
>>>>>> [tls] <<< TLS 1.0 Handshake [length 03b2], Certificate
>>>>>> --> verify error:num=20:unable to get local issuer certificate
>>>>>> [tls] >>> TLS 1.0 Alert [length 0002], fatal unknown_ca
>>>>>> TLS Alert write:fatal:unknown CA
>>>>>>    TLS_accept:error in SSLv3 read client certificate B
>>>>>> rlm_eap: SSL error error:140890B2:SSL
>>>>>> routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned
>>>>>> SSL: SSL_read failed in a system call (-1), TLS session fails.
>>>>>> TLS receive handshake failed during operation
>>>>>> [tls] eaptls_process returned 4
>>>>>> [eap] Handler failed in EAP/tls
>>>>>> [eap] Failed in EAP select
>>>>>> ++[eap] returns invalid
>>>>>> Failed to authenticate the user.
>>>>>> Using Post-Auth-Type Reject
>>>>>> +- entering group REJECT {...}
>>>>>> [attr_filter.access_reject]     expand: %{User-Name} -> devinder at palettemm.com
>>>>>>  attr_filter: Matched entry DEFAULT at line 11
>>>>>> ++[attr_filter.access_reject] returns updated
>>>>>> Delaying reject of request 6 for 1 seconds
>>>>>> Going to the next request
>>>>>> Waking up in 0.9 seconds.
>>>>>> Sending delayed reject for request 6
>>>>>> Sending Access-Reject of id 30 to 203.121.4.59 port 6001
>>>>>>        EAP-Message = 0x04070004
>>>>>>        Message-Authenticator = 0x00000000000000000000000000000000
>>>>>> Waking up in 3.8 seconds.
>>>>>> Cleaning up request 0 ID 24 with timestamp +83
>>>>>> Cleaning up request 1 ID 25 with timestamp +83
>>>>>> Cleaning up request 2 ID 26 with timestamp +83
>>>>>> Cleaning up request 3 ID 27 with timestamp +83
>>>>>> Cleaning up request 4 ID 28 with timestamp +83
>>>>>> Cleaning up request 5 ID 29 with timestamp +83
>>>>>> Waking up in 1.0 seconds.
>>>>>> Cleaning up request 6 ID 30 with timestamp +83
>>>>>> Ready to process requests.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Users File
>>>>>>
>>>>>>
>>>>>> "devinder at palettemm.com" Auth-Type := EAP
>>>>>>
>>>>>> DEFAULT Auth-Type := Reject
>>>>>>        Reply-Message = "Authentication Failed"
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 2009/8/3 Ivan Kalik <tnt at kalik.net>:
>>>>>>>> Do i copy  this file to the XP and install ca.der
>>>>>>>>
>>>>>>>> ca.der and client.p12
>>>>>>>
>>>>>>> Yes.
>>>>>>>
>>>>>>> Ivan Kalik
>>>>>>> Kalik Informatika ISP
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Devinder
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Devinder
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Devinder
>>>>
>>>
>>>
>>>
>>> --
>>> Devinder
>>>
>>
>>
>>
>> --
>> Devinder
>>
>
>
>
> --
> Devinder
>



-- 
Devinder




More information about the Freeradius-Users mailing list