radiusd -X

[kachin Agarwal]

Hi,

Whenever i use radiusd -X i get the following  :

This is a part of radiusd -X

Sending Access-Challenge of id 8 to 127.0.0.1 port 10004
    Tunnel-Type:0 = VLAN
    Tunnel-Medium-Type:0 = IEEE-802
    Tunnel-Private-Group-Id:0 = "2"
    Symbol-User-Group = "moto"
    Symbol-Downlink-Limit-Kbps = 0
    Symbol-Uplink-Limit-Kbps = 0
    EAP-Message = 0x010200061920
    Message-Authenticator = 0x00000000000000000000000000000000
    State = 0x89c2dbc689c0c2620c47c6a69e0623a2
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 127.0.0.1 port 10004, id=9, length=306
    User-Name = "kach"
    Called-Station-Id = "00-15-70-23-F5-34:xtest"
    Calling-Station-Id = "00-15-70-37-8D-05"
    NAS-Port = 1
    NAS-Port-Type = Wireless-802.11
    Framed-MTU = 1400
    Service-Type = Framed-User
    NAS-IP-Address = 127.0.0.1
    NAS-Identifier = "RFS4000"
    Symbol-Wlan-Index = "xtest"
    Symbol-Attr-4 = "1"
    NAS-Port-Id = "WLAN1"
    Connect-Info = "CONNECT 54Mbps 802.11a"
    State = 0x89c2dbc689c0c2620c47c6a69e0623a2
and etc etc...


i did not understand the "waking up in 4.9 sec" ??
Why does it wait for.?
can we remove this?

Thanx & Regards,
Kachin

 




 




      The INTERNET now has a personality. YOURS! See your Yahoo! Homepage. http://in.yahoo.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20091215/555ac5b4/attachment.html>