white list for nas-ipaddress

[Miguel Miranda]

Hi, i cheked the debug and the file is correct:

 Module: Instantiating files
  files {
        usersfile = "/etc/freeradius/users"
        acctusersfile = "/etc/freeradius/acct_users"
        preproxy_usersfile = "/etc/freeradius/preproxy_users"
        compat = "no"
  }

And i tried without Fall-Through = Yes and same result

:-(

Im stuck here, any help will be greatly appreciated
---
Miguel



On Tue, Jul 28, 2009 at 2:27 PM, Ivan Kalik <tnt at kalik.net> wrote:

> > Hi, i want to accept all request coming from a specific nas-ip-assdress ,
> > i
> > used to configure like this (in users file):
> >
> > DEFAULT NAS-IP-Address == "192.168.150.25", Auth-Type := Accept
> >                 Fall-Through = Yes
> > The above settings are not working now, this is the debug of a
> > transaction:
> >
> > rad_recv: Access-Request packet from host 192.168.150.25 port 1645,
> id=52,
> > length=94
> >         NAS-IP-Address = 192.168.150.25
> >         NAS-Port = 108
> >         NAS-Port-Type = Async
> >         User-Name = "123.com.sv"
> >         Called-Station-Id = "22660321"
> >         Calling-Station-Id = "22264218"
> >         User-Password = "cisco"
> >         Service-Type = Dialout-Framed-User
> ...
> > ++[files] returns noop
> ...
>
> How sure are you that the users file you are using is the one server is
> using? Check the debug of the server startup and see if the users file is
> the correct one. If the file is correct, then your syntax isn't (check
> that DEFAULT line for typing mistakes).
>
> Ivan Kalik
> Kalik Informatika ISP
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20090729/5dfda3ab/attachment.html>